• Carbon letters
• /
• 제25권
• /
• pp.60-67
• /
• 2018

In the present work, capability of thymolphthalein-grafted graphene oxide, which was successfully synthesized in this study, in stabilization of polypropylene against thermal oxidation were investigated and compared with that of SONGNOX 1010, a commercially used phenolic antioxidant for the polymer. The modified graphene oxide were incorporated into polypropylene via melt mixing. State of distribution of the nanoplatelets in the polymer matrix was examined using scanning electron microscopy and was shown to be homogeneous. Measurements of oxidation onset temperature and oxidative induction time revealed that thymolphthalein-grafted graphene oxide modifies thermo-oxidative stability of the polymer in the melt state remarkably. However, the efficiency of the nanoplatelets in stabilization of polypropylene against thermal oxidation in melt state was shown to be inferior to that of SONGNOX 1010. Furthermore, oven ageing experiments followed by Fourier transform infrared spectroscopy showed that the modified graphene oxide improves thermo-oxidative stability of the polymer strongly in the solid state, so that its stabilization efficiency is comparable to that of SONGNOX 1010.

• 전자통신동향분석
• /
• 제34권5호
• /
• pp.99-112
• /
• 2019

A quantum light source is an essential element for quantum information technology, including quantum communication, quantum sensor, and quantum computer. Quantum light sources including photon number state, entangled state, and squeezed state can be divided into two types according to the generation mechanism, namely single emitter and non-linear based systems. The single emitter platform contains atom/ion trap, solid-state defect/color center, two-dimensional material, and semiconductor quantum dot, which can emit deterministic photons. The non-linear based platform contains spontaneous parametric down-conversion and spontaneous four-wave mixing, which can emit probabilistic photon pairs. For each platform, we give an overview of the recent research trends of the generation, manipulation, and integration of single photon and entangled photon sources. The characteristics of quantum light sources are investigated for each platform. In addition, we briefly introduce quantum sensing, quantum communication, and quantum computing applications based on quantum light sources. We discuss the challenges and prospects of quantum light sources for quantum information technology.

• 대한화학회지
• /
• 제37권12호
• /
• pp.995-1002
• /
• 1993

TMA와 $NH_3$와의 기상 열분해 반응을 in-situ FTIR 분광법으로 관찰하였다. 사용한 spectroscopic reaction cell은 stainless-steel제로 자체 제작한 hexagonal-port chamber로서 2개의 NaCl window를 평행하게 설치하여 1100$^{\circ}C$까지 가열할 수 있으며 또한 이와 같은 높은 온도에서 분광분석이 가능하였다. TMA와 $NH_3$는 혼합 즉시 반응하여 TMA:$NH_3$adduct를 생성하였으며, 500$^{\circ}C$에서그 adduct가 완전분해됨을 FTIR로 확인하였다. TMA와 TMA:$NH_3$adduct의 열분해는 주생성물로$CH_4$을 방출하였다. 기상의 TMA,$NH_3$ 및 TMA:$NH_3$ adduct에 대하여 상온에서 관찰한 IR band들은 문헌값과 대조하여 assign하였다. TMA의 열분해에 대한 kinetic data로부터 이 반응이 1차식으로 일어남을 알 수 있었다.

• KSBB Journal
• /
• 제23권4호
• /
• pp.345-349
• /
• 2008

본 연구는 에탄올 생산 부산물인 주정박의 사료로서의 가치를 향상시키고 효소 활성을 유지하면서 아미노산이 다량 함유된 발효 사료를 개발하기 위한 고체 발효 조건을 최적화하는데 목적을 두었다. 사용된 균주의 pH에 대한 영향을 살펴본 결과, pH 4에서 효소 활성이 우수하였으며 또한 이 조건은 낮은 pH 조건이므로 잡균에 대한 오염도 예방 할 수 있어 본 실험의 최적 액체배양 조건임을 확인할 수 있었다. 고체 배양을 위한 배양 조건 탐색에서는 60%의 수분을 함유한 고체 배양에서 가장 좋은 효소 활성의 결과를 나타내었으며 적정 배지 조성을 위한 혼합 비율 탐색의 경우 밀기울 함량이 높고 DDG 함량이 낮을수록 효소 활성은 좋았으나 아미노산 함량은 낮은 반면, DDG 함량이 높고 밀기울 함량이 낮을수록 효소 활성은 낮았지만 아미노산 함량은 높은 결과를 나타내었다. 따라서 효소활성 ($\geqq$ 1,000 U/g) 및 아미노산 함량 ($\geqq$ 28%)이 적당한 고체 발효 배지 조성의 비율은 DDG와 밀기울이 1 : 4였다. 이렇게 해서 얻어진 결과로 약 1 ton 정도의 발효 사료 시제품을 생산하였으며 시제품의 효소활성과 조단백질 함량은 각각 1,024 U/g과 33.6%였다.

• 한국세라믹학회지
• /
• 제42권9호
• /
• pp.631-636
• /
• 2005

$LiNi_{1-y}Ga_yO_2$ (y = 0.005, 0.010, 0.025, 0.050, and 0.100) were synthesized by the solid-state reaction method after mechanical mixing, and their_electrochemical properties were investigated. All the $LiNi_{1-y}Ga_yO_2$ (y=0.005, 0.010, 0.025, 0.050, and 0.100) samples had the R3m structure. The sample with y = 0.025 showed the largest first discharge capacity (131.4 mAh/g) and good cycling performance [discharge capacity 117.5 mAh/g ($89.4{\%}$ of the first discharge capacity) at the 20th cycle]. The first discharge capacity decreased as the value of y increased. The samples with y = 0.010 and y = 0.005 had small R-factor but their cycling performance was worse than that of the sample with y = 0.025. All the $LiNi_{1-y}Ga_yO_2$ samples had smaller discharge capacities than $LiNiO_2$, but their cycling performances were better than that of $LiNiO_2$.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.703-712
• /
• 1997

The PTCR devices of BaTiO3 doped with Sb2O3, SiO2 were prepared by Liquid Addition Method(LPAM) where doping sources were used in the forms of Liquid. The amounts of doping in LPMA is smaller than that in solid state mixing method. Also the doping process in LPMA is very suitable for BaTiO3-based PTCR devices because it is easy to obtain homogeneous mixing and reproductivity. By optimizing the doping condition in BaTiO3 system, (0.09 mol% Sb2O3, 0.25 wt% SiO2 and 0.02 wt% MnO2) it was possible to fabricate BaTiO3-based PTCR devices whee the room-temperature resistivity and specific resistivity were 15{{{{ OMEGA }}cm and 2$\times$106 respectively.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.127-132
• /
• 1997

Microstructure of the Fe-Ti system by ion beam mixing of multilayers at 300 K and 77 K has been studied in a wide composition range. The ion bombardment was carried out using $Ar^+$ ions at 80 keV. Using grazing angle x-ray diffraction we find that the lattice parameters of these bcc solid solutions are very close to that of $\alpha$-Fe. Extended x-ray absorption fine-structure spectroscopy have been performed to investgate the short-range order in the ion-beam-mixed state. The structure parameters, such as the interatomic distance and the coordination number are estmated from the Fe K-edge Fourier filtered EXAFS spectra. The interatomic distance is independent of the alloy concentration and it is almost constant. The study of x-ray absorption near-edge structure gives information on the individual $\rho$components of the partial densityof states of the conduction band of the Fe and Ti We also find that a charge transfer from Ti to Fe atoms takes place.

• 한국자기공명학회논문지
• /
• 제3권2호
• /
• pp.90-99
• /
• 1999

Doping of boron atoms in graphite has been well known method to increase the discharge capacity as the negative electrode material for lithium secondary battery. Herein, the boron-doped graphites are prepared by mixing 1, 2.5, 5, and 7 wt. % of boron carbide in carbon during the graphitizing process. The structural states of boron in boron-doped graphites are investigated by solid-state 11B NMR spectroscopy. The resonance lines for substitutional boron atoms are identified as the second order quadrupolar powder pattern with the quardrupole coupling constant, QCC = 3.36(2) MHz. The quantitative analysis of 11B NMR spectra with boron-doped graphite has also been performed via simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.425-428
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. To mold a solid-state silicone encapsulment, curing by mixing at elevated temperatures followed by cooling is necessary. As the silicone molding process is involved in healing and subsequent cooling, the thermal residual stress, which causes mechanical warpage or optical birefringence in the final silicone encapsulment, may be induced if there are non-uniformities in cured silicone material properties or encapsulment shape design. The prediction of residual stress is necessary to design a high-quality silicone molding process. Therefore, in the present paper, a numerical parametric study was attempted to evaluate the heating and cooling effects on the thermal residual stress induced in the cured silicone.

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.224-227
• /
• 2006

809nm의 고출력 반도체 레이저(500mV의 출력광과 LD(Laser Diode) 여기 Nd:YVO4레이저의 파장 1064nm를 공진기 내부에서 비선형 광학 소자 KTP(Potassium titanyl posphate : KTPiOPO4)를 사용하여 합주파 발생 파장인 459nm의 청색레이저를 얻었다. 제2의 위상 정합 정합조건(${\psi}=90^{\circ},\;{\theta}=90^{\circ}$)에서 반도체 레이저의 입력광 세기가400mW일 때 청색레이저의 최대 출력 0.95mW를 얻었으며, 청색레이저의 발진문턱입력 세기는 120mW이었다.