• Title/Summary/Keyword: Solid-liquid mixture flow

Search Result 23, Processing Time 0.02 seconds

Determination of Abamectin Residue in Paprika by High-Performance Liquid Chromatography

  • Xie, Wen-Ming;Ko, Kwang-Yong;Kim, Sung-Hun;Chang, Hee-Ra;Lee, Kyu-Seung
    • Korean Journal of Environmental Agriculture
    • /
    • v.25 no.4
    • /
    • pp.359-364
    • /
    • 2006
  • Reversed-phase high-performance liquid chromatography (HPLC) techniques were developed to quantify abamectin (ABM) in paprika (Capsicum annum). Separation was achieved on a $C_{18}$ ODS column with a mobile phase of acetonitrile/water (96/4, v/v) mixture in an isocratic elution at the flow tate of 1.2 mL/min for avermectins (AVMs). The retention times were 8.0 and 9.7mins for AVM $B_{lb}$ and AVM $B_{1a}$, respectively. Residual AVMs (sum of AVM $B_{1a}$, AVM $B_{1b}$ and 8,9-Z-AVM $B_{1a}$) in the vegetable were extracted with acetonitrile, and the silica solid-phase extraction cartridges were used to purify the extract. AVMs were derivatized using trifluoroacetic acid and 1-methylimidazole, and the derivatives were determined with a fluorescence detector (excitation at 365 nm and emission at 470 nm). High and consistent recoveries, ranging from 93% to 115%, were obtained for AVM $B_{1a}$ and 8, 9-Z-AVM $B_{1a}$ at fortified levels of $20{\mu}g/kg\;and\;200{\mu}g/kg$ for paprika. The limit of quantitation (LOQ) was $2{\mu}g/kg$. The residual levels of AVMs in paprika in a field experiment from one day to seven days after the last application decreased from 18.40 to $7.59{\mu}g/kg$. The half-life $(T_{1/2})$ of AVMs in paprika was 1.47 days.

Fuel-Rich Combustion Characteristic of a Combined Gas Generator (혼합식 가스발생기의 연료과농 연소특성)

  • Lee, Dongeun;Lee, Changjin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.43 no.7
    • /
    • pp.593-600
    • /
    • 2015
  • In this study, a combined hybrid rocket system is newly introduced which has characteristics of both gas generators and afterburner type hybrid rockets. In particular, a combined gas generator utilizing solid fuel and liquid/gas oxidizer was designed as a primary combustor of the system. Combustion tests were carried out with various equivalence ratio affected by parameters such as fuel length, oxidizer flow rate, fuel port diameter and fuel type. In general, fuel-rich gas generator produces low combustion gas temperature to meet the temperature requirement and the target temperature was transiently set less than 1600 K. Since it was found that controlling parameters showed limited effects on the change of equivalence ratio, mixture of $O_2$ and $N_2$ as an oxidizer was additionally introduced. As a result, a combined gas generator successfully produced combustion gas temperature of less than 1600 K Future studies will carry out more combustion tests to attain fuel-rich combustion gas temperature less than 1200 K, which was a temperature requirement of a gas generator system in the previous studies.

Critical Evaluation of and Suggestions for the VOCs Measurement Method Established as the Korean Indoor Air Quality Standard Method (실내공기질 공정시험법 중 VOCs 측정방법의 문제점 고찰 및 개선방안에 관한 연구)

  • Ye, Jin;Jung, Dong-Hee;Baek, Sung-Ok
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.30 no.6
    • /
    • pp.586-599
    • /
    • 2014
  • During the last two decades, indoor air quality and volatile organic compounds (VOCs) have been of concern in Korean society due to their nature of potential health impacts. In order to investigate the pollution levels of VOCss in indoor environments, establishment of a solid test method for monitoring the airborne VOCss is essential. In Korea, a method based on adsorbent sampling and GC analysis coupled with thermal desorption was proclaimed as the Korea Standard Method for Indoor Air Quality Test. This study was carried out to examine some inherent problems of the VOCs measurement method. The VOCs method does not describe in detail preparing the standard samples. The standard samples may be prepared by impregnation of either liquid standard solutions or a mixture of standard gases. In this study, we investigated the optimal temperature condition for transferring the liquid standards onto a standard adsorbent tube. As a result, keeping the impregnation temperature at $250^{\circ}C$ will be recommended in regard of the boiling points of multiple target analytes and the thermal stability of the adsorbent. We also demonstrated some problems associated with handling of a syringe used for transferring the standard solutions onto the adsorbent tubes, and a best way to get rid of the syringe problems was suggested. Finally, a number of field works were conducted to evaluate the performance of adsorbent sampling methods. Comparison of different adsorbent tubes, i.e. tube packed with single sorbent (Tenax) and double sorbents (Tenax with Carbotrap), revealed that 30 to 40% differences between the two groups, implying that sampling efficiency is depending on the volatility and the strength of adsorbents. However, duplicate precisions for VOCs sampling with a same type of adsorbent and at same flow rates appeared to be satisfactory to be all within 20%, which is a quality control guideline. Distributed volume precisions were also found to be within a guideline value, 25%, although the precision was in general inferior to the duplicate precision. The Korea indoor VOCs test method should be more refined and improved in many aspects, particularly procedure and instrumentation for preparing the standard samples and specification of quality control assessment.