• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.77-82
• /
• 1992

FZ법에 의한 결정성장에 있어서 용융대는 고액 계면의 장력에 의해 유지되고 상.하부의 고체봉 사이에 위치하고 있다. 따라서, 용융대의 표면에서는 온도와 농도 차이에 의해 표면장력의 구배가 발생하고 있는 marangoni 대류의 구동력으로 작용한다. 본 연구에서 정상상태의 결정성장시는 결정의 가장자리 영역에서의 Solute 농도는 결정내부 보다도 높아지게 되고 전위의 분포도 불규칙하여 지며, void나 기포 침투, Secondary phase의 생성 및 미소균열등의 결함 발생 확률이 계면부근에서 높아지는 결과를 알 수 있었다. 이는 고액성장 계면이 marangoni 대류에 의하여 이 영역에서 온도의 국부적인 변동에 의해 불규칙하여 지게 되기 때문이라 사료된다.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.577-601
• /
• 2015

The thermomagnetic effect on plane wave propagation at the liquid-solid interface with nonclassical thermoelasticity is investigated. It is assumed that liquid-solid half-space is under initial stress. Numerical computations are performed for the developed amplitude ratios of P, SV and thermal waves under Cattaneo-Lord-Shulman theory, Green-Lindsay theory and classical thermoelasticity. The system of developed equations is solved by the application of the MATLAB software at different angles of incidence for Green and Lindsay model. The effect of initial stress and magnetic field in the lower half-space are discussed and comparison is made in LS, GL and CT models of thermoelasticity. In the absence of magnetic field, the obtained results are in agreement with the same results obtained by the relevant authors. This study would be useful for magneto-thermoelastic acoustic device field.

• 한국주조공학회지
• /
• 제18권3호
• /
• pp.234-239
• /
• 1998

Unidirectional solidification of $Al-CuAl_2$ eutectic composites was studied under the condition of forced convection by vibration. It has been shown that thermal gradient for solid is different from that for liquid during solidification under force convection by vibration. With increase of vibration, mobility of liquid increases, but decreases with decreasing vibration. The rate of solidification is very high initially, and decreases suddenly. For further solidification, the rate of solidification decrceases slowly, and shows a L-type behavior. The mechanical vibration during solidification effects efficiently on nucleation, and induces a forced convection in liquid. By the forced convection, great thermal gradient of liquid interface between solid and liquid can be obtained. The amount of solute near the interface also decreases as solute distribution is improved by the forced convection.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.265-273
• /
• 2003

Numerical analysis of bubble motion during nucleate boiling is performed by imposing a constant heat flux condition at the base of a heater which occurs in most of boiling experiments. The temporal and spatial variation of a solid surface temperature associated with the bubble growth and departure is investigated by solving a conjugate problem involving conduction in the solid. The vapor-liquid interface is tracked by a level set method which is modified to include the effects of phase change at the interface, contact angle at the wall and evaporative heat flux in a thin liquid micro-layer. Based on the numerical results, the bubble growth pattern and its interaction with the heating solid are discussed. Also, the effect of heating condition on the bubble growth under a micro-gravity condition is investigated.

• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.93-98
• /
• 2002

The effect of bonding misfit on single crystallization of transient liquid phase (TLP) bonded joints of single crystal superalloy CMSX-2 was investigated using MBF-80 insert metal. The bonding misfit was defined by (100) twist angle (rotating angle) at bonded interface. TLP bonding of specimens was carried out at 1523K for 1.8ks in vacuum. The post-bond heat treatment consisted of the solution and sequential two step aging treatment was conducted in the Ar atmosphere. The crystallographic orientation analysis across the TLP bonded joints was conducted three dimensionally using the electron back scattering pattern (EBSP) method. EBSP analyses f3r the bonded and post bonded heat treated specimens were conducted. All bonded joints had misorientation centering around the bonded interface for as-bonded and post-bond heat treated specimens with rotating angle. The average misorientation angle between both solid phases in bonded interlayer was almost identical to the rotating angle at bonded interface. HRTEM observation revealed that the atom arrangement of both solid phases in bonded interlayer was quite different across the bonded interface. It followed that grain boundary was formed in bonded interface. It was confirmed that epitaxial growth of the solid phase occurred from the base metal substrates during TLP bonding and single crystallization could not be achieved in joints with rotating angle.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.142-155
• /
• 1992

본 연구에서는 실제 빙축열 시스템의 해석을 위한 기초 모델로서 수직원관 주 위의 응고과정에 대하여 밀도차와 자연대류 효과 및 최대 밀도점을 나타내는 밀도-온 도 관계식을 도입한 수치해석과 실험을 통하여 여러가지 매개변수들이 상변화에 미치 는 영향을 알아 보았다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권2호
• /
• pp.77-83
• /
• 2001

The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.706-711
• /
• 2003

A numerical method is presented for computing unsteady incompressible two-phase flows with immersed solids. The method is based on a level set technique for capturing the phase interface, which is modified to satisfy a contact angle condition at the solid-fluid interface as well as to achieve mass conservation during the whole calculation procedure. The modified level set method is applied for numerical simulation of bubble deformation in a micro channel with a cylindrical solid block and liquid jet from a micro nozzle.

• Tribology and Lubricants
• /
• 제11권4호
• /
• pp.21-27
• /
• 1995

The effects of interface boundary strength on wear and wear transition during sliding have been investigated in silicon carbide ceramics. Three different microstructures, i.e., solid state sintered silicon carbide, liquid phase sintered silicon carbide and liquid phase sintered silicon carbide composite reinforced with TiB$_{2}$ particulates, were designed by hot pressing. Examinations of crack patterns and fracture modes indicated that interface boundaries were relatively strong between silicon carbide grains in the solid state sintered silicon carbide, intermediate in the liquid phase sintered silicon carbide and weak between silicon carbide grains and TiB$_{2}$ particles in the composite. Wear data and examinations of worn surfaces revealed that the wear behavior of these silicon carbide ceramics could be significantly affected by the interface strength. In the solid state sintered silicon carbide, the wear occurred by a grooving process. In the liquid phase sintered silicon carbide and composite, on the other hand, an abrupt transition in wear mechanism from initial grooving to grain pull-out process occurred during the test. The transition occurred significantly earlier in the composite than in the carbide.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.792-801
• /
• 2000

The problem of phase change from liquid to solid in the inviscid plane-stagnation flow is theoretically investigated. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The transient solution is dependent on the three dimensionless parameters, but the equilibrium state is determined by one parameter of (temperature ratio/conductivity ratio). The effect of the fluid flow on the growth rate of the solid in the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state. The characteristics of the transient heat transfer at the surface of the solid and the liquid side of the solid-liquid interface for all the dimensionless parameters are elucidated.