• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• 청정기술
• /
• 제27권3호
• /
• pp.261-268
• /
• 2021

석탄계 입상 활성탄(CGAC)에 의한 acid black 1 (AB1) 염료의 평형, 동력학 및 열역학적 특성을 초기농도, 접촉 시간, 온도 및 pH 를 흡착변수로 하여 조사하였다. 활성탄에 의한 AB1의 흡착반응은 산성에서는 활성탄의 표면(H⁺)과 AB1이 가지고 있는 sulfite ion (SO₃^-), nitrite ion (NO₂^-) 사이의 정전기적 인력에 의해 일어났고, 최고 흡착률은 pH 3에서 97.7%였다. AB1의 등온 데이터는 Freundlich 등온식에 가장 잘 맞았으며, 계산된 분리계수(1/n) 값으로부터 활성탄에 의한 AB1의 흡착이 효과적인 처리과정이 될 수 있음을 알았다. Temkin 식의 흡착열 관련상수의 값은 물리 흡착 공정(< 20 J mol^-1)임을 나타냈다. 동역학 실험에서는 유사 2차 모델이 유사 1차 모델보다 더 일관성이 있었으며 추정된 평형 흡착량은 오차 백분율의 9.73% 이내에서 잘 일치하였다. 입자내 확산이 흡착 과정에서 속도 조절 단계였다. 활성화 에너지와 엔탈피 변화값으로부터 흡착반응이 물리흡착으로 진행되는 흡열반응임을 확인하였다. 엔트로피 변화는 활성탄 표면에서 AB1의 흡착이 일어나는 동안 고-액 계면에서 활발한 반응에 의해 엔트로피가 증가하는 것으로 나타났다. 자유에너지 변화는 온도증가와 함께 흡착반응의 자발성이 더 커지는 것을 나타냈다.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.882-892
• /
• 2011

The influence of rhenium (Re) and ruthenium (Ru) addition on the solidification and solute redistribution behaviors in advanced experimental Ni-base superalloys has been investigated. A series of model alloys with different levels of Re and Ru were designed based on the composition of Ni-6Al-8Ta and were prepared by vacuum arc melting of pure metallic elements. In order to identify the influence of Re and Ru addition on the thermo-physical properties, differential scanning calorimetry analyses were carried out. The results showed that Re addition marginally increases the liquidus temperature of the alloy. However, the ${\gamma}^{\prime}$ solvus was significantly increased at a rate of $8.2^{\circ}C/wt.%$ by the addition of Re. Ru addition, on the other hand, displayed a much weaker effect on the thermo-physical properties or even no effect at all. The microsegregation behavior of solute elements was also quantitatively estimated by an electron probe microanalysis on a sample quenched during directional solidification of primary ${\gamma}$ with the planar solid/liquid interface. It was found that increasing the Re content gradually increases the microsegregation tendency of Re into the dendritic core and ${\gamma}^{\prime}$ forming elements, such as Al and Ta, into the interdendritic area. The strongest effect of Ru addition was found to be Re segregation. Increasing the Ru content up to 6 wt.% significantly alleviated the microsegregation of Re, which resulted in a decrease of Re accumulation in the dendritic core. The influence of Ru on the microstructural stability toward the topologically close-packed phase formation was discussed based on Scheil type calculations with experimentally determined microsegregation results.