• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.28-32
• /
• 2023

Recently, the use of stable lithium nanostructures as substrates and electrodes for secondary batteries can be a fundamental alternative to the development of next-generation system semiconductor devices. However, lithium structures pose safety concerns by severely limiting battery life due to the growth of Li dendrites during rapid charge/discharge cycles. Also, enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against oxide solid electrolytes. For the development of next-generation system semiconductor devices, solid electrolyte nanostructures, which are used in high-density micro-energy storage devices and avoid the instability of liquid electrolytes, can be promising alternatives for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, a low-dimensional Graphene Oxide (GO) structure was applied to demonstrate stable operation characteristics based on Li+ ion conductivity and excellent electrochemical performance. The low-dimensional structure of GO-based solid electrolytes can provide an important strategy for stable scalable solid-state power system semiconductor applications at room temperature. The device using uncoated bare NCA delivers a low capacity of 89 mA h g-1, while the cell using GO-coated NCA delivers a high capacity of 158 mA h g−1 and a low polarization. A full Li GO-based device was fabricated to demonstrate the practicality of the modified Li structure using the Li-GO heterointerface. This study promises that the lowdimensional structure of Li-GO can be an effective approach for the stabilization of solid-state power system semiconductor architectures.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.11-15
• /
• 2001

A thermodynamic assessment for the ZrO$_2$-TiO$_2$ system has been conducted. An optimal thermodynamic data set for this system is evaluated by the CALPHAD(CALculation of PHAse Diagram) method applied to experimental phase diagram and thermodynamic data. The liquid is described by ionic liquid model with two sublattices. The solubilities of the solid phases, tetragonal ZrO$_2$ and TiO$_2$(rutile), were described by subregular substitutional model with one sublattice. Two compounds, ZrTiO$_4$ and ZrTi$_2$O$_6$, are modeled as stoichiometric compounds.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.581-593
• /
• 1990

본 연구에서는 교반기술에 의하여 얻어진 반응고상태의 금속에 단섬유를 첨가 하여 복합재료를 제조하였다. 그리고 제조되어진 복합재료에 있어서 섬유의 분산상 태및 기지재와의 접합관계를 조사하여 압연가공에 필요한 반응고상태인 금속복합재료 의 제조방법을 확립하였다. 균일하게 분실되어진 반용융상태의 단섬유강화형 금속복 합재료를 직접 압연하여 박판을 제조할 수 있는 가능성을 검토하였으며, 또한 제조되 어진 박판의 인장시험에 의하여 기계적 성질을 조사하였다.

• Journal of Plant Biology
• /
• 제32권4호
• /
• pp.313-322
• /
• 1989

A system was established for induction of multi-shoots and plant regeneration from mesophyll protoplasts of alfalfa, Medicago sativa L. cv. Vernal. Different hormonal effects were tested at each step of protoplast culture, i.e. cell division in modified Kao's liquid medium (K566-7). calli formation on SH semi solid medium, and multi-shoot regeneration from calli on SHa and SHb solid media. Frequency of multi-shoots and plant regeneration was affected by various combinations of phytohormones in final step. The evaluation of multi-shoots induction systems via protoplast culture was discused.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.881-890
• /
• 1993

MAS system has narrow sintering temp. range due to the liquid phae sintering and thereby densify rapidly. And especially, its poor mechanical properties limitedthe industrial application. In this study, the improvement of mechanical properties and densification is suggested by the consideration of the toughening mechanisms and isolated pore generation mechanism which is derived by the liquid phase sintering theory in 3Y-TZP added composites. After Pressureless sintering up to 140$0^{\circ}C$ for 5hr, the dihedral angle and contact angle are analyzed by the observation of microstructure. As a result of microstructure analysis, the sintering stage of the specimen sintered for 5hr is analyzed as solid-skeleton stage. And the isolated pore generation mechanisms are considered as (1) The swelling of the liquid phase is predominent due to the facts that dihedral angle is larger than 60$^{\circ}$, contact angle is large and that liquid volume fraction is smaller than 10%. (2) The porous characteristics of the MAS system is also suggested as: the SiO2-rich liquid film is firstly formed at the srface and therefore this reduces the contiguity of the pore, which induces the isolated pore. The strength and fracture toughness increased with the addition of 3Y-TZP and the main fracture toughness improvement mechanisms are analyzed as the crack deflection.

• 한국축산시설환경학회지
• /
• 제19권2호
• /
• pp.177-182
• /
• 2013

We studied the possibility to produce solid fuel using cattle manure and to apply TAO (Thermophilic Aerobic Oxidation) process of solid-liquid separation fraction. The physiochemical compositions of cattle manure solid fuel chip were analyzed as water 0.12%, low calorific value 3,510 kcal/kg, ashes 11.9%, chlorine 0.82%, sulfur dust 0.5%, mercury non-detection, cadmium 1.0 mg/kg, lead 2 mg/kg, arsenic non-detection. In treating cattle manure with TAO reactor the internal temperature of the reactor was increasing higher and $50^{\circ}C$ and over was maintained after 20 hours on. The physiochemical compositions of liquids increased from pH 7.3 to pH 9.18 and EC decreased from 4.6 to 3.48 mS/cm in treating process of cattle manure with TAO reactor. COD and SCOD decreased from 16,800 to 10,400 mg/L, from 4,600 to 2,040 mg/L respectively, which showed about 38% and 56% of remove efficiency respectively.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.208-212
• /
• 1980

In order to clarify the mechanism of the hydration of supersulphated slag cement, the experiments of suspension hydration were performed in the mixtures of slag+CaSO4+water or NaOH solutions with a liquid/solid ratio of 10. The liquid and solid phase of the suspension was chemically analysed and discussed. In the slag-$CaSO_4$--NaOH system, $Al_2O_3$ was dissolved under high pH condition, and the ettringite was formed by a reaction of $CaSO_4$ and $Al_2O_3$ released in the solution. As hydration progressed, ettringite coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag. $CaSO_4$ was not only an activator for slag hydration, but a reactant in the hydration.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.16-23
• /
• 2001

Spray dispersion in high pressure diesel engines have been simulated experimentally with a special emphasis on the effect of swirl by using a liquid injection technique. A constant volume chamber was designed to be rotatable in order to generate a continuous swirl and to have the flow field closely resembling a solid body rotation. Emulsified fuel was injected into the chamber and the developing process of fuel sprays was visualized. The effect of swirl on the spray dispersion was quantified by calculating non-dimensionalized dispersion area according to the spray tip penetration length. The results show that the effect of swirl on the spray dispersion is different between short and long spray penetrations. For short range of spray tip penetration, the effect of swirl on spray dispersion is quite small. However, as the spray tip is penetrated into longer distance in spray chamber, the effect of swirl on spray dispersion becomes larger. These results can be used as a basic data for designing combustion chamber and injection system of direct injection diesel engine.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.224.1-224.1
• /
• 2003

A sensitive and selective liquid chromatographic method coupled with tandem mass spectrometry (LC-MS/MS) was developed for the determination of beraprost in human plasma. Plasma samples were transferred into 96-well OASIS HLB extraction plate using an automated sample handling system and the drugs were eluted with methanol. The eluents were then evaporated and reconstituted with water. All sample transfer and solid-phase extraction (SPE) was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. (omitted)

• Plant Biotechnology Reports
• /
• 제4권1호
• /
• pp.85-94
• /
• 2010

In vitro shoot regeneration of gladiolus in three different culture systems, viz., semi-solid agar (AS), membrane raft (MR), and duroplast foam liquid (DF) cultures was evaluated following the kinetics of shoot multiplication and hyperhydricity at optimized growth regulator combinations. Compared to the AS system, matrixsupported liquid cultures enhanced shoot multiplication. The peak of shoot multiplication rate was attained at 18 days of incubation in the MR and DF systems, whereas the maximum rate in the AS system was attained at 21 days. An early decline in acceleration trend was observed in liquid cultures than the AS culture. The hyperhydric status of the regenerated shoots in the different culture systems was assessed in terms of stomatal attributes and antioxidative status. Stomatal behavior appeared to be normal in the AS and MR systems. However, structural anomaly of stomata such as large, round shaped guard cells with damage in bordering regions of stomatal pores was pronounced in the DF system along with a relatively higher $K^+$ ion concentration than in the AS and MR systems. Antioxidative status of regenerated shoots was comparable in the AS and MR systems, while a higher incidence of oxidative damages of lipid membrane as evidenced from malondialdehyde and ascorbate content was observed in the DF system. Higher oxidative stress in the DF system was also apparent by elevated activities of superoxide dismutase, ascorbate peroxidase, and catalase. Among the three culture systems, liquid culture with MR resulted in maximum shoot multiplication with little or no symptoms of hyperhydricity. Shoots in the DF system were more prone to hyperhydricity than those in the AS and MR systems. The use of matrix support such as membrane raft as an interface between liquid medium and propagating tissue could be an effective means for rapid and efficient mass propagation with little or no symptoms of hyperhydricity.