• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.171-174
• /
• 2015

This study investigates the possibility of applying food waste leachate to a municipal solid waste incinerator in order to effectively dispose of the material and to reduce the environmental impact. The spray positions and the quantity of the food waste leachate in municipal solid waste incinerator were adjusted to examine the stability of the process and the environmental effect. The rear of the first combustion chamber was found to be the desirable location for an environmental perspective in this study. At a food waste leachate injection rate of $2m^3/h$, the concentration of the emitted NOx decreased from 130 ppm to 40 ppm. The consumption of ammonia water was reduced by about 36% after adding the food waste leachate. The inclusion of the food waste leachate to the municipal incinerator also increased the amount of steam that was produced. The results of this research indicated that a positive outcome can be expected in terms of diversifying the treatment options for food waste leachate. The results also provide guidance for institutional framework to manage the incineration of the food waste leachate.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.643-650
• /
• 2003

We analyzed the amount of environmental loads, and the amount of energy consumption through life cycle assessment from a discharge stage to the ultimate disposal to municipal solid waste in Seoul. We carried out inventory analysis of the amount of environmental loads that made the object range collection, intermediate treatment, and the final treatment, and took into consideration each stage exceptions CO$_2$ and NOx , the amount of SOx discharge, and energy consumption. We applied the data of an object model, and acquisition processed the scale of an object model suitably and applied to it to difficult data using the data of the Yokohama City incineration plant in Japan. The amount of environmental loads per Iton of municipal waste were analyzed CO$_2$ 0.4C-ton, SOx 0.4kg and NOx 0.8kg. Moreover, the amount of energy consumption which is 2.4Gcal was computed.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.17-27
• /
• 1999

Applicability of LCA in establishing the integrated solid waste management were examined. Data were collected from current waste management system. LCA method was then applied to find environmentally sustainable waste management. The process comprises five steps : (1) collecting data, comparing the data with comprehensive urban planning as well, (2) analyzing the current waste treatment procedure leading to the database establishment, (3) LCA for the waste management system, (4) finding alternative scenarios based on the former steps, (5) establishing the optimum method in Ecopolis, best fitted to the local situation. The results and suggestions in this study are expected to yield comprehensive analysis as to current practices in waste management. More importantly it will be a valuable data in minimizing environmental burdens in connecting with living environments of Ecopolis. Information regarding the urban system and total environmental quality are expected from this study.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.54-61
• /
• 2017

In general, solid waste arises from lots of human activities such as domestic, agricultural, industrial, commercial, waste water treatment, construction, and mining activities etc. If the waste is not properly disposal and treated, it will have a negative impact to the environment, and hygienic conditions in urban areas and pollute the air with greenhouse gases (GHG), ground water, as well as the soil and crops. In this paper, the Carbon Resources Recycling Appropriate Technology Center feasibility studies are reported at Bantayan Island, Philippines on the municipal solid waste management. The present objective of our study is to characterize the municipal solid waste incineration (MSWI) bottom ash and case study of MSWI production status in Bantayan, Philippines. Currently, wide variety of smart technologies available for MSWI management in developed countries. Recycling is the other major alternative process for MSWI landfill issues. In this paper, the feasibility studies of applied appropriate technologies for the municipal solid waste generation in Bantayan Island, Philippines are reported.

• Journal of Environmental Health Sciences
• /
• v.15 no.2
• /
• pp.69-73
• /
• 1989

The objective of this study is to investigate the amount of disposal, the composition of solid wastes and environmental pollution (leachate, ground water) in a solid waste landfill. The results were as follows. 1. The amount of daily disposal in Taejon City is appoximately 1.5kg/c.d with the heat capacities of 2850 - 4200 kcal/kg. 2. The existing leackage treatment plant must be improved, because it has many problems. 3. It is desirable that urban solid wastes should be treated by sanitary landfill, incineration or compost.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.2
• /
• pp.69-79
• /
• 1998

The purpose of this study is to suggest the design parameters, which are applied to the solid waste treatment and management systems in rural area. In order to drive out the parameters, the solid waste production and management systems in rural and urban areas had been surveyed and analyzed, respectively. The comparisons of the analyzed results are also introduced in the paper. The rural areas referred to the survey are grouped in accordance with the industrial activities in those areas. The conclusions of the study are as follows: 1) The solid waste volumes produced per day per capita in rural area are less than those of urban area. For example, the average volume produced in rural area in 1995 is 0.85kg, which is two thirds of those in Seoul area. 2) for the treatment, the country has depended mainly on landfill. On the other hand, the incineration treatment ratio has been in creasing in rural area. 3) The physical and chemical properties of the rural solid waste, according to the analysis, are similar to those of the urban areas, which means the living pattern in those two areas have a little difference.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.100-102
• /
• 1991

The features of waste water from by-product silk treatment of silk reeling process were investigated and the lipid extracted from waste water was analysed. The COD of waste water from by-product silk treatment was at the level of 605 mgO/$\ell$ Total Dissolved Solid Particles 2,335mg/$\ell$and Total Suspended Solid Particles 2,123mg/$\ell$. The lipid extracted from the waste water from by-product silk treatment was composed of triglyceride 76.8%, free fatty acids 12.5%, diglyceride 5.7% and free sterol 5.0%. In fatty acid composition of lipid, the content of loeic acid, linoleic and linolenic acid was 64.93%, whereas that of palmitic acid was 29.39% and stearic acid 4.93%.

• Advances in concrete construction
• /
• v.14 no.5
• /
• pp.341-354
• /
• 2022

Treatment of solid waste building materials is a crucial method of disposal and an area of ongoing research. New standards for the treatment of solid waste building materials are necessary due to multisource features, huge quantities, and complicated compositions of solid waste. In this research, sustainable nanomaterial mixtures containing nano-paper waste (NPW) and nano-metakaolin (NMK) were used as a substitute for Portland cement. Portland cement was replaced with different ratios of NPW and NMK (0%, 4%, 8%, and 12% by weight of cement) while the cement-to-water ratio remained constant at 0.4 in all mortar mixtures. The fresh properties had a positive effect on them, and with the increase in the percentage of replacement, the fresh properties decreased. The results of compressive strength at 7 and 28 days and flexural strength at 28 days show that the nanomaterials improved the strength, but the results of NMK were better than those of NPW. The best replacement rate was 8%, followed by 4%, and finally 12% for both materials. The combination of NMK and NPW as a replacement (12% NMK + 12% NPW) showed less shrinkage than the others because of the high pozzolanic reactivity of the nanomaterials. The combination of NMK and NPW improved the microstructure by increasing the hydration volume and lowering the water in the cement matrix, as clearly observed in the C-S-H decomposition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2100-2108
• /
• 1991

A hear transfer model was developed to calculate the temperature distribution in the rotary kiln incinerator of municipal solid waste. The thermo-gravimetric characteristics of waste and the gas-to-waste heat transfer coefficient were determined by comparing the experimental results and model prediction. With this, heat transfer rates by existing heat transfer mechanisms were calculated to be compared each other. The effects of treatment capacity, calorific value of waste, and flow rate and temperature of combustion air on the temperature distribution in the rotary kiln incinerator were predicted by the model developed in this work.