• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.503-508
• /
• 2015

The adsorption characteristics of ammonia on MSWI bottom ash were investigated. The effect of the variation of the landfill environmental parameters including pH, anions and organic matter on the adsorption process was discussed. Results showed that the adsorption could be well described by pseudo-second-order kinetics and Langmuir model, with a maximum adsorption capacity of 156.2 mg/g. The optimum adsorption of ammonia was observed when the pH was 6.0. High level of ion and organic matter could restrict the adsorption to a low level. The above results suggested that MSWI bottom ash could affect the migration of ammonia in the landfill, which is related to the variation of the landfill circumstance.

• 산업기술연구
• /
• 제21권B호
• /
• pp.45-49
• /
• 2001

Many cities and provinces are rapidly depleting landfill spaces. As the result, some municities have adopted to incinerate their municipal solid waste(MSW). The motive behind the choice is that incineration significantly reduces the volume of solid waste in need of disposal, destroys the harmful organic compounds that are present in MSW, and provides an attractive source of alternative energy. Conclusively, the generation of MSW ash is expected to increse in the furture. However, disposing the MSW ash in landfills may not always be an environmentally or an economically feasible solution. This paper addresses the various issues associated with MSW ash and its possible use in construction applications.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• Advances in environmental research
• /
• 제5권4호
• /
• pp.237-249
• /
• 2016

The management of municipal solid waste (MSW) is essential for every community; and, it is currently a major challenge in Nigeria. This paper provides an overview of the current MSW management trends in Nigeria and proposes new sustainable MSW management systems. Across Nigerian cities, MSW management is characterized by inefficient collection and transportation to disposal sites. Collection services do not reach some unplanned areas and slums due to poor street network. Even some planned areas are not reached by collection services. The informal sector contributes to waste collection, resource recovery and recycling; however, their activities are not recognized by the governments. Markets exist for recovered materials but more efforts need to be geared towards intensive recovery of materials and expansion of these markets. Despite the high proportion of putrescible matter in MSW, the only form of treatment commonly used currently is open burning for volume reduction. The high organic fraction presents a great opportunity for composting and anaerobic digestion. Ultimate disposal is currently done in open dumpsites. This needs to be upgraded to engineered landfills that are properly sited and adequately operated by well trained personnel. There is an emerging waste stream of concern, electronic-waste (e-waste), that requires urgent sustainable management as e-waste are currently co-disposed with other waste streams or burnt in the open posing detrimental health impacts.

• Environmental Engineering Research
• /
• 제12권2호
• /
• pp.46-54
• /
• 2007

Concentrations of the principal volatile organic compounds, such as benzene, toluene, ethylbenzene, m,p,o-xylene, styrene, and chlorobenzene were measured at the solid waste treatment plants classified into four categories; municipal waste incinerator, municipal waste landfill site, industrial waste incinerator and industrial waste landfill site. The average concentration of VOCs in industrial waste treatment facilities was 33.43 ppb and was significantly higher than that measured at municipal waste treatment facilities (4.71 ppb). The average toluene concentrations measured at incinerators (13.05 ppb) were a little higher than those measured at landfill sites (11.54 ppb). The contribution of the waste treatment facilities to the concentration of benzene (0.35 ppb) and o-xylene (0.15 ppb) in the industrial area was relatively small. However, toluene measured in the industrial waste treatment facilities was the most abundant VOCs with the average concentration of 21.37 ppb. As a result of analyses of fingerprint, in cases of IISH and ILUS, a variety of compounds other than major VOCs were detected in high level. On the Pearson correlation analysis, the correlation was generally positive and some pairs of these VOCs were very strongly correlated (correlation coefficient > 0.75).

• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.87-91
• /
• 2006

This research exposes the process of carbonization of solid waste from the city and the method of activated, as well as the process of meso-porous under several test conditions. In addition, it is expected that the active carbon obtained through this process can be used as filter for air and sewage treatment, and can absorb dioxin(as almost 60-80% of meso-porous and porous properties area) unlike the existing active carbon.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.363-369
• /
• 2015

This study aims to characterize solid household waste and to present physicochemical characteristics of fresh leachate before landfilling in Kasba Tadla city, Morocco. Obtained results show that household waste produced in 2013 were about 11,787 tons, or 0.27 tons/capita/year. These wastes were composed essentially of organic materials (74%), paper (8%), plastics (9%), metals (1%), and glass (0.5%). However, monthly produced leachate ranges from a maximum of $130.92m^3$ during summer and a minimum of $21.88m^3$ in winter. Moreover, leachate treatment using Upflow Anaerobic Sludge Blanket technique was accompanied by a decrease in electrical conductivity, certainly related to leachate-sediment chemical exchanges. Otherwise, the same acidity reduction phenomenon occurs when pH value increased from 4.49 to 6.17 after 24 hours, confirming the system response since the early stages of treatment. In addition, temporal evolution of the treatment efficiency in terms of COD highlighted a very important reduction which reached 94% after 5 days with an average temperature of $25^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• 청정기술
• /
• 제7권1호
• /
• pp.27-34
• /
• 2001

CMP공정에서 발생되는 slurry는 다량의 입자성 물질과 중금속을 함유하고 있다. 이 폐 slurry는 응집성과 침강성에 문제가 있어 처리에 어려움이 있다. 따라서, 본 연구에서는 PACI과 Alum을 이용한 Jar-tester를 통하여 용수 재활용을 위한 최적 응집 조건을 도출하고자 하였다. 고형물 함량이 0.1wt%의 경우 PACI을 응집제로 사용할 때 최적 응집 조건은 pH 4 부터 6에서 투여량은 20~50 mg/L 였으며, 0.5 wt%의 경우 pH 4와 5에서 응집제 투여량은 50~100 mg/L였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.87-88
• /
• 2006

It is needed several large reservoirs and long time in order to remove suspended solid like steel fines and iron oxide at steel making factory. If removing rate of suspended solid in rolling coolant is improved, the productivity of working process can be increased and the area of reservoir can be reduced. Pre-treatment to add extra magnetization of suspended solid was studied Iron hydroxide and electrolytic dissociation were used for pretreatment. High gradient magnetic separation (HGMS) system was used for removing of magnetized suspended solid. Removing ratio showed over than 99% in the coolant containing magnetic fines. Magnetic properties of suspended solid were investigated after mixed with Al2(SO2)3 and organic flocculant by using electrochemical treatment.