• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 2007

A semi-solid forming processing has been developed for manufacturing near net-shape components. The semi-solid forming has two methods. One is thixo-forming with reheating prepared billet, the other is rheo- forming with cooled melt until semi-solid state. In indirect forging processing, this experiment used aluminum rheology materials by electromagnetic stirring system. Rheology material is made by A16061. An experiment has variation factors which are pressure, solid-fraction, stirring current and stirring time. Forged samples are found microstructures and mechanical properties. Forged samples are accomplished heat treatment T6 for high mechanical properties.

• 열처리공학회지
• /
• 제27권3호
• /
• pp.127-132
• /
• 2014

The semi-solid metal forming process has been applied to realize a near-net shape fabrication of a high speed tool steel. A complicatedly shaped part out of SKH51 was successfully manufactured by introducing pertinent materials, tooling and processing conditions. A SKH51 billet with globular grains was heated at temperatures between 1300 and $1350^{\circ}C$ using high frequency induction heater to get semi-solid microstructure before high rate injection of mushy metal into a die cavity for the forming process. It was necessary to control the preheating of dies between 300 and $400^{\circ}C$ to maintain the homogeneous microstructure during the semi-solid metal forming process. Significant defects such as pores, high fraction of liquid fraction and segregation could be removed from the part by using air vents.

• 한국포장학회지
• /
• 제3권2호
• /
• pp.33-42
• /
• 1996

The portion of the recycled paper and paper board packaging material has been the highest in recycled municipal solid waste since 1960 but still the portion of the discarded paper and paper board packaging material is the highest (32.3%) in whole discarded municipal solid waste in USA. In order to reduce more the discarded paper and paper board, the common municipal solid waste treatments were compared and recycling treatment was still recommended for the the discarded paper and paper board rather than of the waste treatments, landfill, incineration, and source reduction. In this paper, the obstacled of recycling treatment of the paper and paper board in municipal solid waste and new application of recycled paper and paper board packaging material are discussed.

• 농촌지도와개발
• /
• 제10권2호
• /
• pp.239-249
• /
• 2003

Waste policy instruments such as garbage bag-fee system and recycling policy initiated in 1995 have contributed to the reduction of solid waste generation. Rural areas now produce less amount of solid wastes in terms of per capital than urban areas and as compare to a decade ago. However, most policy efforts since the early 1990s related to waste issue have been concentrated in urban areas. Waste problems in rural areas are not the amount itself, but the specific characteristics which are unique in rural regions. Large portion of solid wastes and farming wastes are being illegally treated and/or burned out. Surveys show that the main reasons for the illegal treatment of rural wastes are th lack of systematic policy tools targeting on them, insufficient financial capacity and man power of local governments, rural people's cognition problem about wastes, among others. This study reviews current features of the treatment of rural solid wastes and provides policy suggestions for the resolution of the problem.

• 환경위생공학
• /
• 제14권1호
• /
• pp.70-79
• /
• 1999

A questionary survey was conducted to investigate citizen's attitude to treatment facilities of municipal solid waste in Miryang during 8. June of 1998 and 22 June of 1988. Collection effiencies was 86.7%, as 260 individuals of the 300 individuals. The survey showed that 43.0% of answers recognized seriousness of problem of the waste treatment and 33.1% of respondents concerned about recycle of organic waste. 40.8% of total answers said that they most hated landfill site among waste treatment facilities, and most citizens wanted as much distant as possible from waste treatment facilities. It was investigated that the greater part of respondents wanted the greatest compensation. About 58% of respondents was opposed to complete waste treatment facilities. 36.2$ among answers wanted establishment of waste treatment facilities in an industrial complex or an industrial area. The majority of respondents was willing to increase recycle rate and recognized seriousness of landfill site security. The majority of citizens do not trust environmental administration of Miryang City and they think that democracy and open of administration need for overcome MINBY.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.109-114
• /
• 2012

In this study, both sedimentation and thickening experiments were conducted for residuals produced from an advanced water treatment plant for more accurate and practical design of residual treatment train. In order to design a backwashed residual sedimentation basin (SRSB) in the filter backwash water recycle system, two kinds of backwash waters, one from sand filter (SFBW) and the other from GAC adsorption bed (GACBW), were separately collected and their surface loading rate measured. In addition, in order to design a gravity thickener, batch thickening tests were conducted for concentrated residuals taken from sedimentation basin and their limiting solid flux ($SF_{L}$) measured. From the experimental results and consideration of the seasonal characteristics of the residual, surface loading rate of $70m^{3}/m^{2}{\cdot}d$ was proposed as a design parameter for SRSB and solid loading rate of 20 kg $TS/m^{2}{\cdot}d$ was proposed as a design parameter for gravity thickeners. Finally, the material mass-balance was made for the design of each unit process in the residual treatment train.

• 한국식품영양학회지
• /
• 제27권1호
• /
• pp.75-79
• /
• 2014

The following study is the result of herbal teas puffed at different temperatures between $140{\sim}220^{\circ}C$. Depending on treatment temperatures, the water contents decreased, while some carbonization occurred and crude ash contents relatively increased. Also, the crude protein and crude fat experienced little changes. B(${\alpha}$)P contents (0.16~0.17 ppb) showed little change according to treatment temperatures. From this result, the B(${\alpha}$)P content differed depending on the treatment temperature and raw materials. Solid elution rate figures of the herbal teas ranged from 0.27~0.45% (w/w) and the rate of solid elution increased along with higher puffing temperatures. The reason for the increase in solid elution rates is due to the breakage of cross bridges between the raw materials in the herbal tea which are carbohydrates, proteins, lipids and etc. after treatments of physical changes rather than chemical ones.

• 한국농공학회지
• /
• 제35권4호
• /
• pp.67-75
• /
• 1993

This study was carried out to investigate the applicability of Solid Contact Process for the improvement of Moving Media Complete Mixing Activated Sludge(MMCMAS) effluents. Laboratory MMCMAS Reactor and MMCMAS/Solid Contact were operated at the hydraulic loading of 122~340 L/m$^2$/d. The conclusions from this study were as follows ; The addition of Solid Contact tank to the MMCMAS reactor has increased the SCOD and SBOD removal efficiencies of 4 to 67% and 2 to 41%, respectively. In addition, the increments of nitrification rates were about 13 to 46%. It was also observed that the addition of Solid Contact tank has greatly increased the organic removal efficiencies at the higher hydraulic loading rates and also decrement of sludge production rates was 0.1 gVSS/gBODrem. It was therefore concluded that the addition of Solid Contact tank could have polished the effluent of MMCMAS at the higher hydraulic loading rates.

• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.69-73
• /
• 1989

The objective of this study is to investigate the amount of disposal, the composition of solid wastes and environmental pollution (leachate, ground water) in a solid waste landfill. The results were as follows. 1. The amount of daily disposal in Taejon City is appoximately 1.5kg/c.d with the heat capacities of 2850 - 4200 kcal/kg. 2. The existing leackage treatment plant must be improved, because it has many problems. 3. It is desirable that urban solid wastes should be treated by sanitary landfill, incineration or compost.

• 대한전기학회논문지
• /
• 제32권10호
• /
• pp.341-347
• /
• 1983

The purpose of this paper is to develope the appratus for measuring the physical properties of the solid materials electrically, which are now well-known materials for industrial products. Previously Tensilon was used to measure the coefficient of the elasticity of solid, which the treatment of specimens and the measurement were complicated. The special feature in this paper is to measure various materials, as they stand, minutely in a short time by uning the resonance of solid electrically.