• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.6
• /
• pp.578-586
• /
• 2010

This paper describes a theoretical model and acoustic analysis of hysteresis of contacting surfaces subject to compression pressure. Contacting surfaces known to be nonlinear and hysteretic is considered as a simple spring that has a complex stiffness connecting discontinuous displacements between two solid contact boundaries. Mathematical formulation for 1-D interfacial wave propagation between two contacting solids is developed using the complex spring model to derive the dispersion relation between the interface wave speed and the complex interfacial stiffness. Existence of the interface wave propagating along the hysteretic interface is studied in theory and discussed by investigating the solution to the dispersion equation. Unlike the linear interface without hysteresis, there can exist only one distinct mode of interface waves for the hysteretic interface, which is anti-symmetric motion. The anti-symmetric mode of interface wave propagates with the velocity faster than the Rayleigh surface wave but less than the shear wave depending on the interfacial stiffness. If the contacting surfaces are compressed so much that the linear interfacial stiffness is very high, the hysteretic stiffness does not affect the interface wave velocity. However, it has an effect on the speed of interface wave for a loosely contact surfaces with a relatively low linear stiffness. It is also found that the phase velocity of anti-symmetric wave mode converges to the shear wave velocity in despite of the linear stiffness value if the hysteretic stiffness approaches 0.5.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.22-29
• /
• 1997

Ultraviolet weavelength (UV) of 366 nm produced clearer fluorescent dolor than that of 254 nm for the inspection of silkworm cocoons. Fluorescent color of silkworm cocoons varied in color, appears no relationship with the natural color under the normal light. Uniformity of fluorescent color was improved by selection of blue or yellow line from wild types. Blue and yellow, located at the opposite poles on the color solid and L*a*b* color system, confirmed as pure standard of fluorescent color in the silkworm races for commercial white cocoons. the cocoons with blue fluorescence occupied as high as 1.7 to 8.6 times than those with yellow in the Japanese silkworm races. Fluorescence of silkworm cocoon was not affected by forced flow dry at 70$^{\circ}C$ for 6 hrs. While the Japanese races revealed no sexual difference in fluorescent color, sex-dependence of the color was common in the Chinese races for commercial white cocoon. The fluorescence of cocoon shell of Chinese races showed clear separation of blue of median color. Silkworm strain of Dc20 and Fc24 were sexualy segregated 98.8${\pm}$1.20%, 99.0${\pm}$1.00% by cocoon fluorescence, as that of 99.3${\pm}$0.44% by typical larval marking of sex-limited inheritance. Specific expression of cocoon fluorescence, applicable to breeding of simple discrimination of sex for Chinese races, inspected thoroughly on the surface and inner layer of cocoon shell.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.441-446
• /
• 2005

Sole reconstruction should consider both functional and aesthetic aspects; durable weight bearing surface, adequate contour for normal footwear, protective sensation and solid anchoring to deep tissue to resist shearing. The anterolateral thigh perforator free flap has such favorable characteristics as long pedicle, reliable perforators and minimal donor site morbidity. This flap can be safely thinned to 3-4 mm. It can also be elevated with sufficient bulk with muscles like vastus lateralis for complex defect. Between June 2002 and December 2004, 48 cases of sole reconstruction were performed with anterolateral thigh perforator free flaps. Follow up period ranged from 4 to 34 months with a mean of 14.7 months and with exception of one case, all flaps survived. One case of total flap loss was noted due to infection in a patient who was administered lifetime immunosuppressant. Partial necroses developed in three cases but were treated conservatively. Satisfactory aesthetic and functional results were achieved and acceptable gait recovery was noted. Seventy-eight percent of the patients regained protective sensation by 6 months and earlier sensory recovery was noted in sensate flap group. The authors also present a standardized protocol for preoperative patient evaluation and postoperative management and rehabilitation.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.39-49
• /
• 2017

Coffee is one of the most popular and consumed beverages in the world, which leads to a high contents of solid residue known as spent coffee grounds (SCG). As is known, coffee beans contain several classes of health related chemicals, including phenolic compounds, melanoidins, diterpenes, xanthines and carotenoids. The waste water coming out of coffee industries has high concentration of organic pollutants and is very harmful for surrounding water bodies, human health and aquatic life if discharged directly into the surface waters. Hence it is essential to treat and manage the coffee waste. Oyster shells are a waste product from mariculture that creates a major disposal problem in coastal regions of southeast Korea. In the study, the oyster shell waste was used to treat the coffee waste and its effluents. Oyster shells are calcined at $1000^{\circ}C$ for 2 h, and allowed to test the calcined CaO powder ability to inhibit the growth of bacteria in different aging coffee wastes. Calcined oyster shell powder showed anti-bacterial effect that inhibited cell growth of Escherichia coli and other bacterial forms. The antimicrobial activity of calcium oxide from oyster shell waste for biological treatment and utilization as a fertilizers with economic ecofriendly in nature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.25-33
• /
• 1998

We have studied the reduction of NO by propane over perovskite-type oxides prepared by malic acid method. The catalysts were modified to enhance the activity by substitution by substitution of metal into A or B site of perovskite oxides. In addition, the reaction conditions, such as temperature, $O_2$ concentration, space velocity have been studed. In the $LaCoO_3$ type catalyst, the partial substitution of Ba, Sr into A site enhanced the catalytic activity in the reduction of NO. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3(x=0 \sim 1.9)$ catalyst, the partial substitution of Fe into B site enhanced the conversion of NO, but excess amount of Fe decreased the conversion of NO. The surface area and catalytic activity of perovskite catalysts prepared by malic acid method showed higher values than those of solid reaction method. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$ catalyst, the conversion of NO increased with increasing $O_2$ concentration and contact time. The introduction of water into reactant feed decreased the catalytic activity.

• Coupled systems mechanics
• /
• v.2 no.4
• /
• pp.389-410
• /
• 2013

Three-dimensional Lagrangian fluid finite element is applied to seismic response analysis of an oil storage tank with a floating roof. The fluid element utilized in the present analysis is formulated based on the displacement finite element method considering only volumetric elasticity and its element stiffness matrix is derived by using one-point integration method in order to avoid volumetric locking. The method usually adds a rotational penalty stiffness to satisfy the irrotational condition for fluid motion and modifies element mass matrices through the projected mass method to suppress spurious hourglass-mode appeared in compensation for one-point integration. In the fluid element utilized in the present paper, a small hourglass stiffness is employed. The fluid and structure domains for the objective oil storage tank are modeled by eight-node solid elements and four-node shell elements, respectively, and the transient response of the floating roof structure or the free surface are evaluated by implicit direct time integration method. The results of seismic response analyses are compared with those by other method and the validation of the present analysis using three-dimensional Lagrangian fluid finite elements is shown.

• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.163-168
• /
• 2013

In this study, an innovative media, iron mixed ceramic pellet (IMCP) has been developed for arsenic (As) removal from groundwater. A porous, solid-phase IMCP (2-3 mm) was manufactured by combining clay soil, rice bran, and Fe(0) powder at $600^{\circ}C$. Both the As(III) and As(V) adsorption characteristics of IMCP were studied in several batch experiments. Structural analysis of the IMCP was conducted using X-ray absorption fine structure (XAFS) analysis to understand the mechanism of As removal. The adsorption of As was found to be dependent on pH, and exhibited strong adsorption of both As(III) and As(V) at pH 5-7. The adsorption process was described to follow a pseudo-second-order reaction, and the adsorption rate of As(V) was greater than that of As(III). The adsorption data were fit well with both Freundlich and Langmuir isotherm models. The maximum adsorption capacities of As(III) and As(V) from the Langmuir isotherm were found to be 4.0 and 4.5 mg/g, respectively. Phosphorus in the water had an adverse effect on both As(III) and As(V) adsorption. Scanning electron microscopy results revealed that iron(III) oxides/hydroxides are aggregated on the surface of IMCP. XAFS analysis showed a partial oxidation of As(III) and adsorption of As(V) onto the iron oxide in the IMCP.

• Steel and Composite Structures
• /
• v.19 no.4
• /
• pp.939-952
• /
• 2015

In this paper, brake pad performance of two organic matrix composites namely, Sample 1 (contains no brass filler) and Sample 2 (contains 1.5% brass filler), is studied based on tribological and squeal noise behavior. In the first stage, a pin-on-disc tribometer is used to evaluate the frictional behavior of the two pads. On the following stage, these pads are tested on squeal noise occurrence using a drag-type brake dynamometer. From the two type of tests, the results show that; (i) brass fillers play a dual role; firstly as reinforcing element of the brake pad providing primary contact sites, and secondly as solid lubricant by contributing to the formation of a layer of granular material providing velocity accommodation between the pad and the disc; (ii) brass fillers contribute to friction force stabilization and smooth sliding behavior; (iii) the presence of small weight quantity of brass filler strongly contributes to squeal occurrences; (iv) there is close correlation between pin-on-disc tribometer and brake dynamometer tests in terms of tribological aspect.

• Microbiology and Biotechnology Letters
• /
• v.30 no.3
• /
• pp.199-205
• /
• 2002

Gliding motility is defined as the movement of nonflagellated cells in the direction of its long axis on a solid surface and found in many phylogenetically diverse bacteria. Genetic, biochemical, ultrastructural, and behavioral studies have provided a wealth of information related to the mechanism of possible gliding apparatuses. Social motility of Myxococcus xanthus and the gliding of Synechocystis appear to rely on the function of type IV pili, similar to twitching motility of pseudomonas aeruginosa and Neisseria gonorrhoeae. In contrast, adventurous motility of M. xanthus and the gliding of filamentous cyanobacteria and Flavobacterium are not dependent on the pili. Instead, they appear to employ novel motility mechanisms that are currently being unveiled.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.10
• /
• pp.1653-1659
• /
• 2015

Epothilone, which is produced by the myxobacterium Sorangium cellulosum, contributes significant value in medicinal development. However, under submerged culture conditions, S. cellulosum will accumulate to form bacterial clumps, which hinder nutrient and metabolite transportation. Therefore, the production of epothilone by liquid fermentation is limited. In this study, diatomite-based porous ceramics were made from diatomite, paraffin, and poremaking agent (saw dust). Appropriate methods to modify the porous ceramics were also identified. After optimizing the preparation and modification conditions, we determined the optimal prescription to prepare high-performance porous ceramics. The structure of porous ceramics can provide a solid surface area where S. cellulosum can grow and metabolize to prevent the formation of bacterial clumps. S. cellulosum cells that do not form clumps will change their erratic metabolic behavior under submerged culture conditions. As a result, the unstable production of epothilone by this strain can be changed in the fermentation process, and the purpose of increasing epothilone production can be achieved. After 8 days of fermentation under optimized conditions, the epothilone yield reached 90.2 mg/l, which was increased four times compared with the fermentation without porous ceramics.