• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.277-280
• /
• 2008

본 논문에서는 새로운 교량 형식인 U-Channel Bridge(UCB)의 거동에 관해 연구하였고, 거동을 분석할 수 있는 해석 모델을 제시하였다. 바닥판의 하중을 하면에 위치한 보가 지지하는 형태의 상로교와는 대조적으로 UCB는 바닥판 위쪽에 측보가 위치하는 특징이 있다. 본 논문에서는 프레임 요소를 이용한 모델, 판 요소와 프레임 요소를 혼용한 모델, 실제 구조물과 같은 형태의 솔리드 요소를 적용한 모델의 세 가지 모델을 구성하였으며 솔리드 모델의 결과가 가장 정확하다고 가정하여, 두 가지 요소의 해석 결과를 비교하였다. 비교 결과 판 요소와 프레임 요소를 혼용한 모델이 솔리드 모델과 유사한 결과를 나타내었으며, UCB의 구조해석 모델로 판-프레임 모델을 제시하였다.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.562-566
• /
• 2012

본 논문에서는 세그먼트 관형 고체산화물 연료전지(SOFC)의 설계 및 제작과 특성 분석을 다루고 있다. 관형 세라믹 지지체는 압출 공정을 통하여 제작하였으며, NiO-YSZ 연료극과 YSZ 전해질은 담금 코팅법을 통해 세라믹 지지체에 코팅하였다. 코팅된 세라믹 지지체를 $1,350^{\circ}C$에서 5시간 동안 열처리하였으며, $10{\mu}m$ 미만의 치밀하고, 균열이 없는 YSZ 전해질 층을 얻을 수 있었다. 또한 열처리된 세라믹 지지체에 LSM-YSZ/LSM/LSCF로 구성된 다층 구조 공기극을 담금법으로 코팅하여 $1,150^{\circ}C$에서 열처리하였다. 세라믹 관형 지지체에 코팅된 세그먼트 SOFC 셀은 Ag-glass 연결재를 사용하여 전기적으로 직렬 연결하였으며, 수소연료 유량과 운전 온도에 따른 세그먼트 SOFC의 성능 변화를 측정하였다.

• 한국수자원학회논문집
• /
• 제54권2호
• /
• pp.121-133
• /
• 2021

하천에서 발생하는 부유 물질은 주로 유역으로부터 유입되거나 하천 내에서 자생으로 발생하기도 하며, 퇴적되어 중장기적인 수질 오염을 초래할 수도 있는 중요한 수질 인자이다. 하지만, 부유물질의 재래식 계측방식은 점 단위 계측이기 때문에 노동 집약적이며 방대한 양의 자료를 취득하기는 어렵다. 따라서, 본 연구에서는 고해상도 다분광 위성영상을 제공하는 Sentinel-2 위성 자료를 이용하여 낙동강 전역에 대한 원격탐사 기반 부유 물질 농도 계측 기법을 개발하였다. 개발된 기법은 기존 원격탐사 기반 회귀식들의 한계점을 개선하고 낙동강 전체 영역의 지역적 특성을 반영하기 위해 기계학습 모형인 서포트 벡터 회귀(Support Vector Regression, SVR) 모형을 이용하여 다양한 파장대의 분광 밴드들과 밴드비(band ratios)를 고려하였으며, 이를 입력 변수들의 최적 조합으로 재귀적 특징 제거법(Recursive Feature Elimination, RFE)과 SVR의 각 변수별 가중계수를 활용하여 도출하였다. 가장 중요도가 높은 분광 밴드로는 Red-edge 파장대 영역에 속하는 705 nm 밴드가 산출되었으며, 최종적으로 구축된 SVR 모형을 선행 연구들에서 제시한 회귀식들과 비교한 결과, 가장 정확한 계측 결과를 제공하는 것으로 밝혀졌다. 본 연구에서 개발된 SVR 모형은 RFE를 통해 산출된 최적 분광 밴드 조합을 바탕으로 하기 때문에 기존 단일 분광 밴드 혹은 밴드비를 기반으로 구축된 회귀식들이 가지는 변수 의존도를 낮추는 동시에 더욱 정확한 부유물질 농도 공간분포를 제공할 수 있을 것으로 판단된다.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.123-131
• /
• 2012

The requirements for computational resources to perform the structural analysis are increasing rapidly. The size of the current analysis problems that are required from practical industry is typically large-scale with more than millions degrees of freedom (DOFs). These large-scale analysis problems result in the requirements of high-performance analysis codes as well as hardware systems such as supercomputer systems or cluster systems. In this paper, the pre- and post-processing system for supercomputing based large-scale structural analysis is presented. The proposed system has 3-tier architecture and three main components; geometry viewer, pre-/post-processor and supercomputing manager. To analyze large-scale problems, the ADVENTURE solid solver was adopted as a general-purpose finite element solver and the supercomputer named 'tachyon' was adopted as a parallel computational platform. The problem solving performance and scalability of this structural analysis system is demonstrated by illustrative examples with different sizes of degrees of freedom.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.447-454
• /
• 2018

Although flotation techniques are often used for the removal of algal particles, the practicality of algae-harvesting technologies is limited owing to the complex and expensive facilities and equipment required for chemical coagulation. Here, we examined the feasibility of an approach to separating algal particles from water bodies without the need for chemical coagulants, depending on the condition of the algae, and to determine the optimal conditions. Using Anabaena sp., a cyanobacterium causes algal blooms in lakes, we stimulated auto-flocculation in algal particles without coagulants and conducted solid-liquid separation experiments of algal particles under various conditions. The six cultivation columns included in our analysis comprised four factors: Water temperature, light intensity, nutrients, and carbon source; auto-flocculation was induced under all treatments, with the exception of the treatment involving no limits to all factors, and algal particles were well-settled under all conditions for which auto-flocculation occurred. Meanwhile, flotation removal of auto-flocculated algal particles was attained only when nutrients were blocked after algae were grown in an optimal medium. However, no significant differences were detected between the functional groups of the extracellular polymeric substances (EPSs) of floated and settled algal particles in the FT-IR peak, which can cause attachment by collision with micro-bubbles.

• 한국생활과학회지
• /
• 제13권5호
• /
• pp.701-709
• /
• 2004

A cultural model can change as times go by within one ethnic group. For example, a strong familism has existed for a long time throughout a history of Korea, but it is, just like most social values, now in the midst of a rapid change. Accordingly, Koreans' belief about family values and responsibility for supporting their old parents are changing, too. Especially, supporting parents was one of the highly-estimated traditional values, but it seems to no longer exist. However, one's own rearing experience might be a moderator of association of his or her familism with the ebbing value. Therefore, we aim to address the following research question: What is the relations among college student's familism, their own rearing experiences, and their beliefs about supporting old parents. A total of 155 college students participated in this study. Data were analyzed by SPSS. T-test and ANOVA were used for data analysis. The findings are that college students' beliefs in supporting parents are significantly influenced by their familism and rearing experiences: Those with a strong familism and warm rearing experience have solid beliefs in supporting parents.

• Smart Structures and Systems
• /
• 제13권1호
• /
• pp.1-24
• /
• 2014

The present study deals with two dimensional electro-elastic analysis of a functionally graded piezoelectric (FGP) cylinder under internal pressure. Energy method and first order shear deformation theory (FSDT) are employed for this purpose. All mechanical and electrical properties except Poisson ratio are considered as a power function along the radial direction. The cylinder is subjected to uniform internal pressure. By supposing two dimensional displacement and electric potential fields along the radial and axial direction, the governing differential equations can be derived in terms of unknown electrical and mechanical functions. Homogeneous solution can be obtained by imposing the appropriate mechanical and electrical boundary conditions. This proposed solution has capability to solve the cylinder structure with arbitrary boundary conditions. The previous solutions have been proposed for the problem with simple boundary conditions (simply supported cylinder) by using the routine functions such as trigonometric functions. The axial distribution of the axial displacement, radial displacement and electric potential of the cylinder can be presented as the important results of this paper for various non homogeneous indexes. This paper evaluates the effect of a local support on the distribution of mechanical and electrical components. This investigation indicates that a support has important influence on the distribution of mechanical and electrical components rather than a cylinder with ignoring the effect of the supports. Obtained results using present method at regions that are adequate far from two ends of the cylinder can be compared with previous results (plane elasticity and one dimensional first order shear deformation theories).

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.183-196
• /
• 2006

A new operation strategy. which can guarantee the data consistency of engineering information among the various intelligent information systems, is presented for engineering information of bridges, and construction methodology of integrated database is developed to support the strategy. The two core standard techniques are adopted to construct the integrated database. One is the Standard for the Exchange of Product Model Data (STEP) for CAD/CAE information and the other is the Extensible Markup Language(XML) for engineering document information. The former enabler structural engineers to handle the structural details with three-dimensional geometry-based information of bridges, and ACIS solid modeling kernel is employed to develop AutoCAD based application modules. The latter can make document files into data type for web-based application modules which assist end-users to search and retrieve engineering document data. In addition, relaying algorithm is developed to integrate the two different information, e.g. CAD/CAE information and engineering document information. The pilot application modules are also developed, and a case study subjected to the Han-Nam bridge is presented at the end of the paper to illustrate the use of the developed application modules.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• 산경연구논집
• /
• 제14권11호
• /
• pp.27-35
• /
• 2023

Purpose: China's economy has changed considerably in recent decades. By delivering a comprehensive knowledge of the elements that support successful foreign direct investment (FDI) in China and practical insights for multinational firms operating in this dynamic environment, this research offers a new perspective and sets itself apart from previous studies. Research design, data and methodology: It is necessary to give a thorough overview of the body of information on successful FDI in China, which justifies the adoption of a systematic literature review. The study may use a wide range of studies because of this methodology, which guarantees that inferences have a solid and supported basis in data. Results: The findings in the present study have clarified how China's government policies and regulatory framework affect foreign direct investment (FDI). Previous studies have indicated that regulatory changes can significantly impact FDI. For instance, more foreign direct investment (FDI) has been drawn to liberalized industries such as technology and finance. Conclusions: In conclusion, for foreign direct investment (FDI) to be successful in China, it is essential to consider these four factors: local partnerships and cultural adaptation, market research and entry strategy, regulatory environment and policy support, and risk management and contingency planning.