• 한국축산시설환경학회지
• /
• 제1권1호
• /
• pp.47-53
• /
• 1995

An efficient Treatment of animal wastewater is one of the hot issues for preventing the environmental pollution. It should be established the design parameter in order to purify the animal wastewater. A test is carried on in the pilot plant as a simplified activated sludge process. A vibration sieve separator is deviced to keep the pollution load constant by means of separation of solid matter. The BOD removal efficiency of the vibration sieve showed over 50%. As the test results, the BOD contents of the influent was in average of 3,000 mg/I and that of the effluent 85 mg/I. So, the BOD removal rate showed 97% in average. The SS-contents in the primary chamber was about 3,300 mg/I and that of effluent 92 mg/I. The SS removal efficiency showed 97%. The removal rate of total nitrogen and phosphore were in average of 82% respectively. Carrying out in winter season, it showed relatively good results; The design parameter approved in this test can be applied to the full-time farmers.

• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.278-283
• /
• 2003

Textural properties of tofu manufactured with micronized full-fat soyflour (MFS) were enhanced by the addition of soy protein isolate, whey protein concentrate, chitosan oligosaccharide and mushroom powder. The MFS solution (14.2% solid content) was converted to semi-solid tofu by a two-stage heat treatment with the addition of 4% coagulant mix. The MFS tofu was evaluated by a compression test as well as sensory evaluation. To produce the semi-solid gel (MFS tofu) with reasonably high strength and toughness, the MFS solution with 14.2% solid content and 7.0% protein had to be heat treated at 121$^{\circ}C$ for 3min. The relative toughness of MFS tofu was increased by the addition of SPI, showing a 144% increase. The toughness of MFS tofu prepared with the MFS/SPI mixture was greatly increased by the addition of WPC at the level of 0.7% and the water separation from MFS tofu was greatly reduced. Furthermore, the toughness and strength of MFS/SPI tofu was enhanced by the addition of 0.1% chitosan oligosaccharide and 0.2% mushroom powder. The sensory evaluation of the tofu fortified with SPI, chitosan oligosaccharide and mushroom powder was superior to that of MFS tofu, with a higher score for overall preference.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 춘계 총회 및 학술발표회
• /
• pp.1-11
• /
• 1993

Cartridge filters are widely used in liquid-solid separation processes. To select a proper filter system for the requirements of a given application, a knowledge of filter efficiency and dirt capacity is required. The filter manufacturer needs to provide data which are based on test procedures simulating real parameters on a laboratory scale. There does not exist at present a standard for liquid filter testing (with the exception of the Multipass Test to ISO4752 for hydraulic filters). Users have to work with data based on different test procedures. This paper will discuss principles of filter testing, efficiency andd dirt capacity results as a function of test parameters, and data interpretion to provide a guideline for the end user.

• 한국추진공학회지
• /
• 제13권3호
• /
• pp.41-49
• /
• 2009

본 논문은 공기흡입식 추진기관의 고체 로켓 부스터 분리에 관한 수학적 모델링과 시뮬레이션 기법을 기술하였다. 비행체 및 부스터는 하나의 다물체(multi-body)로 고려하였고 부스터는 단지 비행체의 축 방향으로 움직이는 것으로 가정하였다. 비행체 및 부스터의 동적 운동은 Kane 방법에 의해 모델링 되었다. 다양한 부스터 위치에 따라 전체 시스템에 작용하는 공력은 DATCOM 소프트웨어를 사용하여 산출되었으며 부스터 분리 유효 작용면에 작용하는 내부 분리 압력은 일반적인 기체역학 및 Taylor-MacColl 관계식에 의해 산출되었다. 수치적 해석은 Mathworks사의 Matlab이 사용되었다. 해석 결과에 의하면 부스터 분리 동안 마하수 및 받음각 변화 등은 크지 않는 것으로 나타났으며, 실제 시험 장치를 이용한 부스터 분리 시험이 진행될 경우 자세 각 변화, 흡입 유동 특성 등은 무시할 만한 수치임을 확인할 수 있었다.

• 한국축산식품학회지
• /
• 제44권4호
• /
• pp.934-950
• /
• 2024

This study addresses the prevalent issue of meat species authentication and adulteration through a chemometrics-based approach, crucial for upholding public health and ensuring a fair marketplace. Volatile compounds were extracted and analyzed using headspace-solid-phase-microextraction-gas chromatography-mass spectrometry. Adulterated meat samples were effectively identified through principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA). Through variable importance in projection scores and a Random Forest test, 11 key compounds, including nonanal, octanal, hexadecanal, benzaldehyde, 1-octanol, hexanoic acid, heptanoic acid, octanoic acid, and 2-acetylpyrrole for beef, and hexanal and 1-octen-3-ol for pork, were robustly identified as biomarkers. These compounds exhibited a discernible trend in adulterated samples based on adulteration ratios, evident in a heatmap. Notably, lipid degradation compounds strongly influenced meat discrimination. PCA and PLS-DA yielded significant sample separation, with the first two components capturing 80% and 72.1% of total variance, respectively. This technique could be a reliable method for detecting meat adulteration in cooked meat.

• 식품보건융합연구
• /
• 제10권3호
• /
• pp.19-22
• /
• 2024

The field of synthetic biology has emerged in response to the ongoing progress in the life sciences. Advances have been made in medicine, farming, eating, making materials, and more. Synthetic biology is the exploration of using living organisms to create new organisms. By manipulating specific genes to express targeted proteins, proteins can be created that are both productive and cost-effective. Solid-phase extraction (SPE) and liquid-liquid extraction (LLE) are employed for protein separation during the production process involving microorganisms. This study centers on Scanning Probe Microscopy (SPM) to showcase its utility in the food industry and food management. SPE is predominantly utilized as a pretreatment method to eliminate impurities from samples. In comparison to LLE, this method presents benefits such as decreased time and labor requirements, streamlined solvent extraction, automation capabilities, and compatibility with various other analytical instruments. Anion exchange chromatography (AEC) utilizes a similar methodology. Pharmaceutical companies utilize these technologies to improve the purity of biopharmaceuticals, thereby guaranteeing their quality. Used in the food and beverage industry to test chemical properties of raw materials and finished products. This exemplifies the potential of these technologies to enhance industrial development and broaden the scope of applications in synthetic biology.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.1-8
• /
• 2015

이중펄스 로켓 추진기관은 하나의 펄스분리장치에 의해 분리된 2개의 추진제 그레인을 가진 변형된 고체 추진기관이다. 이러한 추진기관의 주요 성능은 펄스분리장치 홀 면적대 노즐 목 면적비의 변화에 영향을 받는다. 본 연구에서는 펄스분리장치 홀 면적대 노즐 목 면적비 변화에 따른 내부유동특성을 고찰하기 위해 유동해석을 수행하였다. 유동해석에 사용된 기체로는 hot gas로 HTPB/AP계 복합추진제 연소가스와 cold gas로 질소가스롤 사용하였다. 이중펄스 로켓 추진기관의 내부유동해석 결과는 공압실험 결과와 비교 분석을 통해 검증하였다. 본 논문에서는 상용 CFD(Computational Fluid Dynamics) 코드인 ANSYS FLUENT V14.5를 이용하여 유동을 모사하였다.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.19-28
• /
• 2000

고체추진 로켓모타의 개발이나 성능평가 때에는 추진기관의 추력, 연소실 압력, 온도, 연소시간 등 정적연소시험을 통해서 필요한 데이터론 측정한다. 그러나 휴대용 대공 유도무기의 경우에는 추진기 관의 화염으로부터 사수를 보호하기 위해 대단히 까다로운 안전규정을 요구하고 있다. 이러한 안전 규정들을 만족시키기 위해 설계된 분리장치나 점화안전장치의 개발 및 성능평가를 위해서는 이들 장치들이 결합된 추진기관에 대해 실제 비행 환경 하에서 설계목표의 신뢰도를 시험하기 위한 동적연소시험이 수행되어야 한다. 본 연구에서는 이러한 휴대용 대공 유도무기 추진시스템의 개발이나 성능평가를 위한 동적연소시험 기법 및 동적시험대의 설계 및 제작에 관한 연구를 수행하였다.

• 에너지공학
• /
• 제23권3호
• /
• pp.17-20
• /
• 2014

수중에서 인, 질소의 함유농도는 부유고형물의 농도에 비례하여 증가하기 때문에 부유고형물의 제거는 유기물과 함께 질소, 인을 동시에 제거할 수 있다. 부유고형물은 수중에 미분체를 투입하면 투입된 미분체와 부유고형물 사이에는 반데르발스 힘과 같은 인력이 작용하여 응집이 형성되고 이 응집덩어리는 자성을 띠게 된다. 이와 같은 자성응집덩어리를 자력에 의해 형성된 자성 매트릭스에 직접 부착시켜 분리 제거함으로써 오수를 세정할 수 있다. 본 자료는 자성분리기술과 관련하여 오수 내의 부유고형물의 제거특성에 대한 것을 실험적으로 평가하고 부유물의 제거효율에 대하여 규명하고자 한다.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.319-331
• /
• 2017

This vacuum preloading combined with polyacrylamide (PAM) flocculation was proposed to separating solid-liquid in waste slurry and to improving bearing capacity of soft soil ground. By using waste slurry taken from drilled shaft construction site in Shanghai, China, a series of settling column tests with four typical flocculants and one normal for waste slurry were carried out for comparative analysis. The optimal amounts for each flocculant were obtained from the column tests. Then, model tests on vacuum preloading with anionic polyacrylamide (APAM) flocculation and without flocculants were carried out. The out of water and the settlement of slurry surface ground were monitored during the model tests, and the changes in water content, particle-size and pore-size distributions in different positions after the model tests were measured and discussed. It is found that water content of the waste slurry without APAM flocculation changed from 204 to 195% by 24 hours standing and 15 hours vacuum preloading, while the water content of the waste slurry with APAM flocculation was declined from 163 to 96% by 24 hours standing, and was further reduced into 37% by 136 hours vacuum preloading, which shows that the combined method is feasible and effective.