• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.101-111
• /
• 2009

In this study, the physico-chemical characteristics of municipal solid waste (MWS) which was treated in gangwon area were investigated. It is necessary to measure the characteristics of municipal solid waste for build a waste treatment and RDF facility and for data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $101.8{\sim}199.8kg/m^3$. This MSW was composed of 30.7% of food wastes, 36.3% of papers, 15.8% of plastics & vinyls, 1.9% of textiles, 3.2% of wood and 1.5% of rubber & leathers respectively. Most of MSW are composed of food, paper and plastic waste and the combustible waste is more than 90%. For three components, moisture is 44.6%, combustible component is 47.7% and ash is 7.7% respectively. The chemical elements are carbon, oxygen, and hydrogen on the dry basis of wastes. The low heating value of the MSW measured by calorimeter was obtained as 2,631 kcal/kg, and the high heating value of the MSW was obtained as 3,310 kcal/kg.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.332-339
• /
• 2012

Objectives: The purpose of this study was to prevent health problems and environmental contamination resulting from inappropriate management of dental wastes and to provide reference data for revision and supplementation of dental clinic waste management guidelines. Methods: From 640 total of dental clinics registered in 16 cities and counties in Gyeongsangnam-do, 100 (60 in Changwon (Masan, Changwon), 29 in Gimhae, and 11 in Jinju) were included in this study. From July 2010 to September 2010, investigators visited the 100 dental clinics and conducted survey interviews using a structured survey questionnaire regarding disposal methods for liquid wastes (suction pump, spittoon container waste, used liquid disinfectants, and X-ray developer), and disposal methods for solid waste (suction pump, spittoon container waste, and general medical waste). Results: All the 100 dental clinics were found to treat liquid waste from suction pumps and spittoon containers in the same manner as general waste water. Nineteen percent of the clinics treated solid waste that was not filtered through the filter of a suction pump as general waste. Fifty or more percent of the clinics treated solid waste in spittoon containers as general waste. Seventy percent of the clinics used disinfectant solution, although most of them treated used disinfectants in the same manner as general waste water. Some clinics treated used X-ray developer and X-ray fixer in the same manner as general waste water. In most of the clinics, used drapes were washed within the clinic. Conclusions: It was found that waste water and dental wastes at some dental clinics were treated in inappropriately. Thus, in conclusion, the development of guidelines regarding proper management of liquid and solid dental waste at dental clinics is required, and hygiene and environmental training for workers at dental clinics is necessary.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.158-166
• /
• 2004

The optimal conditions are obtained for the decomposition of solid radioactive wastes, including ion exchange resin, zeolite, active charcoal, and sludge from nuclear power plant. In the process of decomposing the radioactive wastes were used the microwave acid digestion method with mixed acid. The solution after acid digestion by the following method was colorless and transparent. Each solution was analyzed with ICP-AES and AAS and the recovery yield for 5 different elements added the simulated radioactive wastes were over 94%. As an effective pre-treatment, the proposed microwave acid digestion conditions concerning the chemical trait of each radioactive waste are expected to be generally applied to above-mentioned radioactive wastes from nuclear power plant hereafter.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.81-90
• /
• 1988

Agricultural and municipal wastes arc serious nuisance. in Korea. Disposal of these wastes by land application, incineration or burial have created serious environmental problems such as air pollution and ground water contamination. Uncomposted waste materials are also potential sources of plant and soil pathogens. As available sites for waste burial become more difficult to find and air quality standards for incineration become stricter, composting as a method for treating solid wastes will become more attractive. This article discussed the recent topics on composting to further develop a rational strategy. The future of composting is developed based on the interacting factors of the price of energy and fertilizer, public policy, economic considerations, and biotechnology.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1660-1662
• /
• 1997

High temperature arc plasma technologies are recently being developed in Europe, Japan and United States as one or the treatment schemes of municipal wastes, industrial wastes and vitrification of low level radioactive wastes. An experimental plasma melting furnace, a transferred type plasma torch and 100kW class power supply have been made. Operation of this system and some basic experimental results for solid wastes treatment are reported.

• Journal of Environmental Science International
• /
• v.15 no.10
• /
• pp.975-982
• /
• 2006

This study has been conducted to optimum operating conditions for effective acid fermentation according to OLR(organic loading rate) in the mesophilic and thermophilic acid fermentation process. The results are summarized as follows. In order to obtain reasonable acid fermentation efficiency in performing acid fermentation of food wastes in thermophilic condition, organic loading rate was required below 20 gVS/L.d. As $SCOD_{Cr}/TKN,\;SCOD_{Cr}/T-P$ of thermophilic acid fermented food wastes In organic loading rate 20 gVS/L.d were 18.9, 73.4 respectively, it was possible to utilize as external carbon source for denitrification in sewage treatment plant after solid-liquid separation as well as co-digestion of fermented food wastes and sewage sludge.

• Journal of Environmental Policy
• /
• v.14 no.1
• /
• pp.135-158
• /
• 2015

An efficient management system of mercury-containing waste was designed by reviewing the management and treatment of spent fluorescent lamp in Korea and foreign countries. According to Waste Management Act in Korea, mercury-containing wastes from households are classified as municipal solid wastes even though mercury-containing wastes pose hazardous risks. In general, hence, mercury-containing wastes from households are not being managed properly because those wastes from households were not classified as specific wastes (or hazardous wastes). Some mercury-containing wastes are managed as a mandatory target item in waste charge system and Extended Producer Responsibility (EPR) system under Act on Promotion for Saving and Recycling of Resources. An efficient management plan of mercury-containing wastes can be derived with an improved collection system, designating disposal sites and advanced treatment facilities for spent fluorescent lamps. Finally, the role of each agent involved from collection to disposal of mercury-containing wastes was suggested to establish the efficient management system for mercury-containing waste.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.129-134
• /
• 2020

The main reason that drives many developing countries to pursue waste-to-energy (WtE) technologies is that it produces energy while eliminating build-up of large quantities of wastes, at a time, when oil and gas reserves are declining. The rate of generation of municipal solid wastes (MSW) in any given country depends on many factors including economy, population, and modernization of industry and infrastructure developments. The United Arab Emirates (UAE) is a federation of seven emirates that has grown to be one of the Middle East's most important economic centers. UAE has also become one of the highest waste producing countries due to fast development and growth; thus, UAE pursue modern technologies to covert generated wastes into energy. In this communication, the status of on-going waste to energy projects and WtE plants that are currently under design and construction in UAE are discussed. The need for development of WtE technologies is presented based on the literature, reports, economics and the environmental regulations.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.311-319
• /
• 1999

Leaves of Aloe vera Linne and bloods of domestic animal were composted in a soild state fermentation reactor (SSFR) by using microbial additive including a bulking and moisture controlling agent. From solid-culture of microbial additive, 10 species of bacteria and 10 species of fungi were isolated and, their enzyme activities including amylase, carboxy methyl cellulase CMCase, lipase and protease were detected. Optimum fermentation conditions of Aloe leaves and domestic animal bloods in SSFR were obtained from the studies of response surface analysis employing microbial additive content, initial moisture content, and fermentation temperature as the independent variables. The optimum conditions for SSFR using Aloe leaves were obtained at 9.45$\pm$73%(w/w) of microbial additives, 62.73$\pm$4.54%(w/w) of initial moisture content and 55.32$\pm$3.14$^{\circ}C$ of fermentation temperature while those for SSFR using domestic animal bloods were obtained at 10.25$\pm$2.04%, 58.68$\pm$4.97% and 57.85$\pm$5.$65^{\circ}C$, respectively. Composting process in SSFR was initially proceeded through fermentation and solid materials were decomposed within 24 hours by maintaining higher moisture level, and maturing and drying steps are followed later. After the fermentation step, the concentrations of solid phase inorganic components were increased while that of organic components were decreased. Also, concentrations of total organic carbon(TOC), peptides, amino acids, polysaccharides, and low fatty acids in water extracts were increased. As fermentation in composting process depends on initial C/N ratios in water extracts of two samples were increased because of increased water-soluble TOC. From these results, it was revealed that solid state fermentation reactor using microbial additives can be used in composting process of organic wastes with broad C/N ratio.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.58-62
• /
• 1992

The objective of this study is to investigate the generation rates, composition, propertion and lower heating values of each material in the municipal solid wastes(MSW) as well as the effect of landfill leachate on the environment in Taejon. The results are as follows: 1. The annual average generation rate of MSW in Taejon is approximately 1.7kg/c.d. 2. The weight percent of combustible matters is on average 80 and the lower heating value of MSW is measured to be more than 1,700 kcal/kg after removing the briquette component. 3. It is necessary for us to take a proper management system for leachate treatment in the landfill because it has many problems in the sewage and groundwater. 4. It is recommeded that MSW be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.