• Journal of Microbiology and Biotechnology
• /
• v.29 no.10
• /
• pp.1624-1628
• /
• 2019

Banana planting altered microbial communities and induced the enrichment of Fusarium oxysporum in rhizosphere compared with that of forest soil. Diseased plant rhizosphere soil (WR) harbored increased pathogen abundance and showed distinct microbial structures from healthy plant rhizosphere soil (HR). The enriched taxon of Bordetella and key taxon of Chaetomium together with some other taxa showed negative associations with pathogen in HR, indicating their importance in pathogen inhibition. Furthermore, a more stable microbiota was observed in HR than in WR. Taken together, the lower pathogen abundance, specific beneficial microbial taxa and stable microbiota contributed to disease suppression.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.63-68
• /
• 1992

This study was performed to investigate the seasonal variation of the composition of domestic solid wastes and the characteristics of the leachate sampled in In-Cheon sanitary landfill site. The results were as follows 1. Combustible part was larger than incombustible part of the domestic solid wastes in spring and sumer. 2. The food waste was major source of solid wastes in In-Cheon city as 36.5%, and its variation by seasons was negligible. 3. BOD of the leachate was in the range of 853~7, 350mg/l, and fluctuated by seasons. 4. The mean of COD$_{cr}$ Was 5, 044mg/l, the mean of COD$_{Mn}$ was 2, 212mg/l. Namely, the method by $K_{2}Cr_{2}O_{7}$ was more sensitive than the method by KMnO$_{4}$. 5. TOC was in the range of 773~3, 958mg/l, it was lower than BOD.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.421-427
• /
• 2012

Nepal is one of the least urbanized countries in the world where more than 80% of the total population live in rural areas. In recent years, the rate of urbanization became rampant which ultimately accelerated immense pressure on municipal services, especially on managing the ever increasing amount of wastes. Due to lack of technology, infrastructure and financial capacity management of increasing amount of solid waste has become a major challenge in municipalities of Nepal. The indiscriminate dumping of solid wastes already affected the urban environment by creating a serious occupational health and environmental hazard to the vicinity of the dumping sites. However, there is great possibility of recovering methane from the landfill sites since the typical Nepalese municipal solid waste contains more than 65% of organic wastes. Despite having enormous potential of generating electricity from hydropower, Nepal is facing acute shortage of energy. Therefore, comprehensive scientific research and development is necessary for making solid waste to environmentally friendly by converting waste to the energy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.E
• /
• pp.13-21
• /
• 1995

This Pilot study identifies potential dioxin and furan sources and medical plastic wastes produced from hospital solid waste streams. In this study, air emissions of dioxins and furans from sources in the U.S., which were estimated by the U.S. Environmental Protection Agency (EPA), were summarized. Potential loading routes of dioxins and furans to the U.S.-Canada Great Lakes region have also been identified in trcent surveys. In addition, medical and hospital solid wastes produced in typical large city hospitals were characterized as important potential sources of dioxins and furans. Plastic contents in medical Plastics Characterization Survey (MMPCS), plastics composition data were obtained from a survey of five Massachusetts Hospitals and Medical Centers. By identifying plastic wastes as a percentage of total hospital wastes, we were able to use data from a preliminary study that analyzed the waste stream of 16 major New York City hospitals (NYCMWS) characterizing the plastic content of the wasters. This study determined the types of plastic wastes included in each medical waste stream (regulated medical waste or non regulated medical waste) and it discussed the potential for recyclibility of hospital plastic wastes. The combination of the NYCMWS and the MMPCS surveys provides for the first overview of the size of the recycling task of hospital plastic wastes and the potential of dioxin elimination if dioxin generating plastics were to be eliminated from hospital use.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.299-308
• /
• 2000

This study analyzed solid wastes generated from a school. The emission potential of hazardous pollutants generated from incineration of the school solid wastes (SSWs) was analyzed. Components of the SSWs were identified and the SSWs were classified into combustible and non-combustible wasts. The combustible wastes consisted of papers of 56.5^ plastics of 30.2% woods of 7.1% and fibers of 6.1% based on weight of the wastes. The moisture content and the ash content of the combustible wastes were 18~20% and 11~13% respectively. The combustible wastes of the SSWs were incinerated by using a small-scale incinerator. Fly and bottom ashes and volatile organic compounds (VOCs) were collected from the incineration. Also the metal leaching experiments on the fly and bottom ashes were performed, In analysis of metals leached from the ashes the total amounts of metals leached in the acid solution (pH=3) were much greater than those in the neutral solution (pH=5.8~6.2) For the same amounts of the fly and bottom ashes the total amounts of metals leached from the fly ashes were much greater than those from the bottom ashes. The VOCs produced from incineration of the SSWs consisted of aromatics of 42.1% aliphatic alkenes of 26.3% oxidized forms of 17.3% and aliphatic alkanes of 14.3% In addition the considerable amounts of hazardous air pollutants (e.g benzene chloro-benzene and chloro-alkanes) and compounds (e. g, aliphatic alkenes) with high potential of ozone or photochemical smog formation were identified from the incineration experiment of the SSWs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.220-227
• /
• 2010

The manufacturing of the solid fuel using wastes has been studied on the purpose of the reduction of green house gases and the profit-making as alternative fuel, and thus, it has become as technically improved as to be used as business. However, the production of solid fuel with multi-wastes combination needs a caution while the solid fuel with one-waste has not a significant component change. This study analyzes the solid fuel components through the practical plant experiment to the various wastes. The resulted data shows a different pattern than the theoretical one in the component analysis, and it can be concluded that the adequate uniform mixing has a great influence on the manufacturing of the solid soil.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.183-187
• /
• 2001

Present states on reutilization of metal-bearing solid wastes in China including metal-containing gangue, red mud, nonferrous metallurgical slag or residue, arsenical slag, steel - iron slag, waste batteries, were described in detail. The wastes pile up at a large quantity, resulting in seriously potential harm to environment. Most of these wastes, however, contain valuable metals, which are regarded as important secondary resources for extracting metals. Waste slag and batteries with a high grade of metals are treated by a hydro-based and / or pyre-based method for extracting valuable metals. While gangue and waste slag with a low grade are as a raw material in architecture field. In the future, a novel technology, such as high-grads magnetization separation technique and biological technique, will be designed to treat these wastes for protecting environment and recycling valuable components. These wastes, furthermore, are synthetically reutilized to produce various architectural materials, including glass and ceramics.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.09a
• /
• pp.3-12
• /
• 2006

The main feature of these total technologies is that we can constitute the optimum treatment scheme fitting to the property of wastes, amount of wastes and energy requirement. For high moisture content wastes or biomass resources, high pressure steam process (MMCS) for crush, dry and deodorize wastes to produce high quality fertilizer of fuel is most appropriate. For dry or semi-dry solid wastes, the STAR-MEET system can be applied to produce low-BTU gases for power generation using duel fueled diesel engines of Stirling engines, and the REPRES and HyPR-MEET systems can be applied to produce hydrogen rich medium-BTU gas. For waste plastics and oils, liquefaction technology is best fit to produce light oil or kerosene equivalent fuel oils. These total technologies are completely different from the existent waste treatment technologies based on land-filling or incineration, and are expected to disseminate all over the world in the near future.

• Journal of Environmental Health Sciences
• /
• v.15 no.2
• /
• pp.69-73
• /
• 1989

The objective of this study is to investigate the amount of disposal, the composition of solid wastes and environmental pollution (leachate, ground water) in a solid waste landfill. The results were as follows. 1. The amount of daily disposal in Taejon City is appoximately 1.5kg/c.d with the heat capacities of 2850 - 4200 kcal/kg. 2. The existing leackage treatment plant must be improved, because it has many problems. 3. It is desirable that urban solid wastes should be treated by sanitary landfill, incineration or compost.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.03a
• /
• pp.135-159
• /
• 1995

Typical Solid Waste Stream Composition : Paper and paperboard (41%), Glass (8.2%), Metals (8.7%), Plastics (6.5%), Rubers, Leather, Textiles and Wood (8.1%), Food Wastes (7.9%), Yard Wastes (17.9%), Miscellaneous Inorganic Wastes (1.6%).