• 한국토양비료학회지
• /
• 제44권1호
• /
• pp.104-111
• /
• 2011

In order to assess the performance of co-digester using pig slurry and food waste at the farm scale biogas production facility, the anaerobic facility that adopts the one-stage CSTR of 5 $m^3\;day^{-1}$ input scale was designed and installed under the conditions of the OLR of 2.33 kg $m^3\;day^{-1}$ and HRT of 30 days in an pig farmhouse. Several operation parameters were monitored for assessment of the process performance. The anaerobic facility was operated in three stages to compare the performance of the anaerobic co-digester. In the Stage I, that was fed with a mix of pig slurry to food waste ratio of 7:3 in the input volume, where input TS content was 4.7 (${\pm}0.8$) %, and OLR was 0.837-1.668 kg-VS $m^3\;day^{-1}$. An average biogas yield observed was 252 $Nm^3\;day^{-1}$ with methane content 67.9%. This facility was capable of producing an electricity of 626 kWh $day^{-1}$ and a heat recovery of 689 Mcal day-1. In Stage II, that was fed with a mixture of pig slurry and food waste at the ratio of 6:4 in the input volume, where input TS content was 6.9 (${\pm}1.9$) %, and OLR was 1.220-3.524 kg-VS $m^3\;day^{-1}$. The TS content of digestate was increased to 3.0 (${\pm}0.3$) %. In Stage III, that was fed with only pig slurry, input TS content was 3.6 (${\pm}2.0$) %, and OLR was 0.182-2.187 kg-VS $m^3\;day^{-1}$. In stage III, TS and volatile solid contents in the input pig slurry were highly variable, and input VFAs and alkalinity values that affect the performance of anaerobic digester were also more variable and sensitive to the variation of input organic loading during the digester operation. The biogas produced in the stage III, ranged from 11.3 to 170.0 $m^3\;day^{-1}$, which was lower than 222.5-330.2 $m^3\;day^{-1}$ produced in the stage II.

• 한국식품저장유통학회지
• /
• 제23권4호
• /
• pp.495-501
• /
• 2016

본 연구에서는 석장(간장소금)의 이화학적특성을 연구하여 새로운 소금소재로써의 적합성과 특성을 알아보고자 하였다. pH는 석장이 7.76으로 가장 높았으며, 천일염은 6.40, 간장이 4.35 순서로 낮았다. 환원당은 천일염이 0.052%로 0.045%의 석장보다 약간 높았으며 간장은 2.389%를 나타내었다. 가용성 고형분 함량은 천일염이 $11.67^{\circ}Brix$, 석장이 $11.87^{\circ}Brix$로 석장이 천일염보다 조금 높은 값을 나타내었으며, 간장의 가용성 고형분 함량은 $58.13^{\circ}Brix$의 값을 나타내었다. 또한 아미노태질소 함량은 천일염 0.68%, 석장 0.69%, 간장 3.74% 순으로 나타났으나 유의적 차이는 없었다. 불용성분 및 사분은 식품공전상의 규격에 준한 낮은 값을 나타내었다. 천일염의 색도 $L^*$, $a^*$, $b^*$ 값은 각각 85.87, 0.52, 4.36을 나타내었고 석장은 58.86, 6.19, 18.2의 값을 나타내어 적색도와 황색도에서 더욱 높은 값을 띠었다. 무기질 함량에서 Mg은 천일염이 제일 높게 나타내었으며, 석장의 P, Na, Fe 및 Al 함량이 천일염과 간장보다 비교적 높게 측정되었으며, 또한 Ca 함량은 천일염과 석장이 5.17 ppm과 5.18 ppm으로 간장보다 높게 조사되었다. 중금속은 거의 검출되지 않았으며 식품공전의 규격을 모두 충족하였다. 결과를 종합해 보면 석장은 간장의 가용성 고형분 및 melanoidin 색을 띠는 적색도와 황색도의 특성을 모두 보유하여 간장 소스로서의 적합성이 인정되며, 또한 석장의 환원당, 아미노태 질소, 불용성분 및 사분 등 함량이 천일염과 유사한 값을 나타내었고, 이에 반해 무기질 중 Fe 함량이 아주 풍부한 것으로 보아 새로운 소금 소재로 이용 가능할 것으로 사료된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권6호
• /
• pp.491-497
• /
• 2001

Polymethylmethacrylate(PMMA) is currently commonly used material for the reconstruction of bone defects and fixation of joint prosthetics following congenital and acquired causes. Although PMMA has widespread use, it does not possess the ideal mechanical characteristics with osteoconductivity and osteoinductivity required. In order to overcome these problem, addition of bovine bone drived defatting demineralized bone(BDB) powders to a PMMA bone cement was done for improvement of physical property and bone forming characteristics of composite. In order to investigate the influence of BDB reinforcement on the PMMA, we measured physical property of compressive, tensile, flexural strength, and scanning electron microscopic examinations. The results were obtained as follows: 1. The PMMA forms a solid cellular matrix with open cells about $100{\mu}m$ in variable size and incorporating BDB. BDB aggregates inside the cells form a porous network that is accessible from the outer surface. 2. The physical properties were compressive strength of mean $22.74{\pm}1.69MPa$, tensile strength of mean $22.74{\pm}1.69MPa$, flexural strength of mean $77.53{\pm}6.93MPa$. Scanning electron microscopic examinations were revealed that there was DBD particles form a highly porous agglomerates. BDB can be added PMMA in the form of dried powders, the composites are applicable as bone substitutes. BDB and PMMA mixture is shown to produce a class of composites that due to their microstructure and improved mechanical properties may be suitable for application as bone subsitutes. The mechanical and material properties of the BDB-PMMA bone substitute composites are competitive with those properties of a porous ceramic matrix of other hydroxyapatite and with those of natural bones.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.523-527
• /
• 2002

LiMn$_2$O$_4$ compounds were synthesized by calcining a mixture of LiOH and MnO$_2$(CMD) at 47$0^{\circ}C$ for 10 h and then calcining again at $650^{\circ}C$ to 90$0^{\circ}C$ fur 48 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd3m. The lattice parameter increased gradually as the sintering temperature rose. The electrochemical cells were charged and discharged fur 20 cycles at a current density 300$\mu$A/$\textrm{cm}^2$ between 3.5 V and 4.3 V. The voltage vs. discharge capacity curves for all the samples showed two plateaus. The LiMn$_2$O$_4$ sample calcined at 90$0^{\circ}C$ had the largest first discharge capacity. This sample exhibited the best crystallinity, had relatively large lattice parameter and had relatively large particles with rectatively homogeneous size. All the samples showed good cycling performances. Among all the samples, the LiMn$_2$O$_4$ calcined at 85$0^{\circ}C$ had relatively large first discharge capacity and very good cycling performance. The addition of excess LiOH and the mixing in ethanol considered to help the formation of the more LiMn$_2$O$_4$ phase per unit weight sample and the more stable LiMn$_2$O$_4$phase. These led to the larger discharge capacities and the better cycling performances. The cyclic voltammograms fur the second cycle of the LiMn$_2$O$_4$ samples showed the oxidation and reduction peaks around 4.05 V and 4.18 V and around 4.08 V and 3.94 V, respectively. The larger first discharge capacity of the sample calcined at the higher temperature is related to the larger lattice parameter.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.806-811
• /
• 2016

오르가노솔브를 이용한 전처리는 목질계 바이오매스의 주요성분을 분별하고 전처리 바이오매스의 효소당화를 효과적으로 유도할 수 있는 공정이다. 이에 사용되는 오르가노솔브는 증류와 재순환공정으로 쉽게 재사용이 가능하고 고형성분에서 리그닌을 화학적으로 분별시킬 수 있다는 장점이 있다. 경제적인 이유로서 낮은 분자량의 알코올(에탄올, 메탄올 등)이 사용되어 왔으며, 무기산(염산, 황산, 인산 등)이 촉매로 첨가되었을 경우 탈리그닌 효과 및 자일로스 성분의 수율을 증대시킬 수 있다. 본 연구에서는 오르가노솔브로는 에탄올을 사용하였고 소량의 황산 촉매를 첨가해 전처리를 수행하였다. 바이오매스는 침출식반응기에서 40~50 wt%의 에탄올을 이용해 20~60분 동안 $170{\sim}180^{\circ}C$에서 전처리가 되었다. 전처리를 마친 바이오매스에 대해서는 전처리 효과를 알아보기 위하여 72시간 동안 효소당화를 수행하였다. 그 결과 $180^{\circ}C$에서 50 wt% 에탄올을 이용한 리기다의 2단 전처리에서 당화율은 40.6%로 나타났지만 같은 조건에서의 1단 전처리에서는 55.4%로 가장 높게 나타나는 것을 보았을 때, 용매와 촉매를 균일하게 섞는 것이 전처리에 효과적이라는 것을 알 수 있었다.

• 공업화학
• /
• 제5권1호
• /
• pp.160-175
• /
• 1994

육티탄산칼륨을 $860{\sim}1100^{\circ}C$의 온도범위에서 서냉소성법에 의해 효과적으로 합성하였다. 섬유상의 $K_2Ti_6O_{13}$의 결정을 얻기 위해서는 소성온도 $1100^{\circ}C$, $K_2CO_3$에 대한 $TiO_2$의 mole ratio는 4.5가 가장 적절하였다. 소성 후 서냉조작은 결정상의 티탄산칼륨과 $K_2O$와 $TiO_2$의 혼합물 액상과의 화합으로 티탄산칼륨의 섬유상 결정화에 효과적이며, 적절한 서냉속도는 $860^{\circ}C$까지 $0.5^{\circ}C/min$이었다. 서냉 소성 후 물에 의한 알칼리 침출 조작에 의해 단상의 $K_2Ti_6O_{13}$의 섬유상이 얻어지며 이때의 침출조건은 끓는물에서 10시간이 적절하였다. 또한 소성시료인 $K_2CO_3$와 $TiO_2$ 혼합물에 대한 가압은 티탄산칼륨의 섬유화에 매우 효과적이었다. 최종적으로 얻어진 육티탄산칼륨은 직경 $0.5{\sim}1{\mu}m$, 길이는 $100{\sim}1000{\mu}m$로 aspect ratio 100~1000의 섬유상 결정이었다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.139-147
• /
• 1994

올소인산엽 결정의 육성을 수열법에 의해 행하였으며,육성결정의 성질은 X선 회절,Vickers 경도계 등을 이용하여 조사하였다. $AIPO_4$와 $GaPO_4$의 출발원료는 $AI_2O_3$또는 $Ga_2O_3$와 $NH_4H_2PO_4$의 혼합물을 고상반응시킨 뒤 얻어진 반응물을 수열처리하여 단상으로 제조하였다. 올소인산염 결정의 육성에 있어 큰 성장속도를 나타내는 수열조건은 다음과 같았다. 즉,$AIPO_4$ 결정: 온도범위, $170$~$200^{\circ}C$; 온도차, $15$~$20^{\circ}C;$수열용매, 4몰 HCI용액, $GaPO_4$결정: 온도범위, 210~$240^{\circ}C;$ 온도차, $25$~$30^{\circ}C; $ 수열용매,4몰 HCI용액이었다. 육성결정의 형태는 저온에서(1010),(1011),(0111)면이 발달하는 경향을 보였으나 육성온도가 증가함에 따라(0001)면이 잘 발달하였다. 한편, 올소인삼염 결정 $(AIPO_4/GaPO_4)$의 성질은 다음과 같았다. 즉, 격자정수$(Nm^2)$;a=0.494,c=1.094/a=0.490,1.105, 밀도 $(gcm^{-3}); 2.62/3.56$,경도$(Nm^2);1.02{\times}10^1^0/7.06{\times}10^9, $굴절율; $n_e= 1.529{\pm}0,003, n_e= 1.529{\pm}0,003/ n_e= 1.611{\pm}0,006,n_e= 1.599{\pm}0,006$,복굴절율;${\pm}0.01$ / $ {\pm}0.012$, 유전율 $(Fm^-1); 6/7$이었다.

• 대한화학회지
• /
• 제33권4호
• /
• pp.337-342
• /
• 1989

비기체 연소란 테르밋 반응과 같이 고체혼합물 내에서 직접 점화할 때 자발적으로 진행되는 매우 격렬한 발열반응이다. 비기체 연소합성법은 빠른 공정, 에너지 절약, 저공정가, 그리고 고순도의 생산품을 만들 수 있는 장점이 있다. 이 비기체 연소법에 의하여 Ti$Si_x$(x=0.6, 0.8, 1.0, 2.0)계의 시료를 외부적인 소결 공정없이 합성하였다. $Ti_5Si_3$와 $Ti_5Si_4$는 각각 육방정계와 정방정계 이었고 TiSi와 $TiSi_2$는 사방정계 이었다. X-선 분석결과는 모두 JCPDS data와 매우 잘 일치하였다. 모든 반응의 연소형은 정류상태 연소였으며 $Ti_5Si_3$, $Ti_5Si_4$ 및 TiSi의 연소파의 전파속도는 0.6cm/sec 이상이었고 $TiSi_2$의 경우는 0.28cm/sec이었다.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.669-675
• /
• 2010

One of the greatest challenges for our society is providing powerful electrochemical energy conversion and storage devices. Rechargeable lithium-ion batteries and fuel cells are among the most promising candidates in terms of energy and power density. As the starting material, $TiCl_4{\cdot}YCl_3$ solution and dispersing agent (HCP) were mixed and synthesized using ammonia as the precipitation agent, in order to prepare the nano size Y doped spherical $TiO_2$ precursor. Then, the $Li_4Ti_5O_{12}$ was synthesized using solid state reaction method through the stoichiometric mixture of Y doped spherical $TiO_2$ precursor and LiOH. The Ti mole increased the concentration of the spherical particle size due to the addition of HPC with a similar particle size distribution in a well in which $Li_4Ti_5O_{12}$ spherical particles could be obtained. The optimal synthesis conditions and the molar ratio of the Ti 0.05 mol reaction at $50^{\circ}C$ for 30 minutes and at $850^{\circ}C$ for 6 hours heat treatment time were optimized. $Li_4Ti_5O_{12}$ was prepared by the above conditions as a working electrode after generating the Coin cell; then, electrochemical properties were evaluated when the voltage range of 1.5V was flat, the initial capacity was 141 mAh/g, and cycle retention rate was 86%; also, redox reactions between 1.5 and 1.7V, which arose from the insertion and deintercalation of 0.005 mole of Y doping is not a case of doping because the C-rate characteristics were significantly better.

• 한국약용작물학회지
• /
• 제21권1호
• /
• pp.7-19
• /
• 2013

This study was carried out to select new pelleting binder and material for seeds from Fraxinus rhynchophylla Hance and Alnus sibirica Fisch. ex Turcz. The optimum treatments of the various concentrations and species of priming agents to improve seed germination of both woody medicinal plants were also estimated. Germinability was increased when the seeds of Fraxinus rhynchophylla Hance was soaked in -1.0 MPa of PEG6000 solution at $15^{\circ}C$ for 4 days significantly, the optimum treatment for improving germination of Alnus sibirica Fisch. ex Turcz was observed when the tested seeds was soaked in 100 mM of KCl at $15^{\circ}C$ for 4 days. The influence of physical and chemical properties of pelleting solid materials, the mixture of gypsum, diatomaceous earth, dalma ceramic and vermicuolite (6:1:1:1 ratio) were found as the best pelleting materials for Fraxinus rhynchophylla Hance and Alnus sibirica Fisch. ex Turcz. seeds. To satisfy the requirements of absorption and compatibility for multi-layer seed pelleting, SGPA (Starch-grafted cross-linked polyacrylates) hydrogel was prepared using starch, acrylonitrile, ceric ammonium nitrate, nitric acid, methyl alcohol and potassium hydroxide. The resulting SGPA hydrogel showed high water absorption but not plant compatibility. It suggested that seed pelleting using pelleting materials and SGPA hydrogel (multi-layer coating) after priming agent treatment is to increase germinability and seedling growth and it can reduced irrigation labours and can also save seed.