• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.289-293
• /
• 2008

Porous HAp with three-dimensional network channels was prepared in a polymer foam process using a in-situ formation. HAp/polyol with various HAp solid contents was formed with an addition of isocyanate. Under all conditions, the obtained porous HAp had pore sizes ranging $50\;{\mu}m$ to $250\;{\mu}m$. The influence of the HAp content on the physical and mechanical properties of porous HAp scaffolds was investigated. As the solid content increased, the porosity of the porous HAp decreased from 79.3% to 77.9%. On the other hand, the compressive strength of the porous HAp increased from 0.7 MPa to 3.7 MPa. With a HAp solid content of 15 g, the obtained porous HAp had physical properties that were more suitable for scaffolds compared to other conditions.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1160-1164
• /
• 2013

The solid super acid catalyst $SO{_4}^{2-}$/$ZrO_2$ was prepared by impregnation method using $ZrO_2$ as the catalyst support. Catalyst forming was taken into consideration in order to separate catalyst from the mixture of cellulose acetate propionate (CAP). $Al_2O_3$ and sesbania gum powder were selected as binding agent and auxiliary agent respectively. The catalytic properties were evaluated through esterification of cellulose with acetic anhydride, propionic anhydride and characterized by XRD, FTIR and $NH_3$-TPD. In this paper, the effects of concentration of $H_2SO_4$ impregnated, calcination temperature, esterification temperature and esterification time on the yield, acyl content and viscosity of CAP were investigated. The results showed that $SO{_4}^{2-}/ZrO_2$ successfully catalyzed CAP synthesis over catalysts impregnated in 0.75 mol/L $H_2SO_4$ and calcined at $500^{\circ}C$. The yield, acetyl content and propionyl content of CAP reached the maximum value of 105.3%, 29.9% and 25.8% reacted at $50^{\circ}C$ for 8 h.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.141-148
• /
• 2003

This study deals with the estimation of material properties according to the construction condition for water-soluble rubberized asphalt waterproofing material of spray type. In this study, the waterproofing material property by the spray construction method is suggested by means of estimation its tensile performance and temperature dependency according to mix proportion ratio(4:1, 8:1), referenced viscosity and solid content (A:360cps, 76%, B:580cps, 79%, C:490cps, 70%), spray angle($30^{\circ}$, $45^{\circ}$, $60^{\circ}$), and spray distance(30cm, 50cm, 70cm). The result of testing are as follows. (1) The mix proportion ratio of principal agent and hardener is 4:1. (2) The viscosity referenced and solid content are 490cps and 70%. (3) The spray angle referenced is $45.^{\circ}$ (4) The distance referenced from concrete surface to spray gun is 40~50cm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.914-919
• /
• 1998

This work was designed to determine the optimum extraction conditions for imporving the quality of Eucommia ulmoidesl leaf-tea. Soluble solid content was 27.7% in the tea extracted at 99.3$^{\circ}C$(extraction temperature) and 67.8 min(extraction time) which were maximum points by the ridge analysis. The extraction conditions for the maximum organoleptic scores were 72.9$^{\circ}C$ and 59.6 min in color, 80.$0^{\circ}C$ and 90.0 min in aroma, 77.8$^{\circ}C$ and 55.5 min in aftertaste, and 77.9$^{\circ}C$ and 53.1 min in overall palatability. The extraction conditions for the minimum organoleptic scores were 77.8$^{\circ}C$ and 52.7 min in astringent taste, and 75.1$^{\circ}C$ and 49.4 min in Chinese medicine taste. The optimum ranges of the conditions based on soluble solid content and overall palatability of the tea wre 75~83$^{\circ}C$ and 55~65 min. The soluble solid content and overall palatability predicted at ooptimum condition(78$^{\circ}C$ and 60 min) werw similar to experimental values.

• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.46-52
• /
• 1996

Effective method for the preparation of Dongchimi juice was developed by addition of NaCi, sucrose and bydrolytic enzymes before fermentation and addition on Dongchimi juice during fermentation. The radish was ground and suspended in water(1:1, w/v) with addition of spices(garlic, green onion and ginger) followed by fermentation at $25^{\circ}C$. The addition of 2% NaCi and 0.5~2.0% sucrose resulted in significant increase of solid content and it was also improved by the addition of polysaccharide hydrolyzing enzyme during fermentation. When the fermented juices of pH 5.4 of 4.4 were added by 15% of total weight before(pH 5.4 juice)and during (pH 4.4 juice) fermentation, a significant increase in solid content after 24hrs of fermentation was resulted. The combined method of addition of 2% NaCI, 1.0% sucrode, 0.1% Viscozyme and 10% of fermented juice of pH 5.4 and 4.$ before and during fermentation improved solid content, reducing sugar, color and showed little effect on viscosity. The organoleptic characteristics were also improved by the combined method.

• Journal of Animal Environmental Science
• /
• v.22 no.1
• /
• pp.35-44
• /
• 2016

This study was conducted to establish a database of high solid manure(HSM) in domestic. Theoretical methane potential and HSM characteristics was evaluated using breef and dairy manure (n=156). Total solids and Volatile solids of HSM increased depending on time flow, the results showed $20.4{\pm}3.2$ and $17.4{\pm}2.8%$. respectively. C/N ratio of breef HSM was higher than dairy HSM C/N ratio. In theoretical methane potential, the result of breef and dairy HSM was showed $505.2{\pm}25.3$ and $493.5{\pm}20.2$, respectively. Nitrogen content of total HSM increased depending on time flow, the result of breef and dairy nitrogen content was showed $1.9{\pm}0.3$ and $2.8{\pm}0.2$, respectively. Carbon content of total HSM showed approximately 10% reduction. The optimal time of bed replacement was indicated between 29 amd 31 days based on the optimal C/N ratio. Therefore, this study was considered that it has high utilization for livestock manure recycling and basis of relevant research.

• New & Renewable Energy
• /
• v.10 no.2
• /
• pp.12-18
• /
• 2014

The objective of this work is to produce solid biofuel from sawdust using the HTC (Hydrothermal carbonization) process. The HTC process of feedstock involves the raw material coming into contact with high temperature and pressurized water. The HTC process could produce gaseous, liquefied and solid products, but this study focused on solid product only as an alternative to coal. In this study, sawdust used for a feedstock and its moisture content was under 5%. Water was added with the feedstock to raise moisture content to 80% and also used catalysts. The HTC process was performed at temperature range from 200 to $270^{\circ}C$ and reaction time was 15 to 120 min. Rising temperature resulted in increasing the higher heating value (HHV) of HTC product. In case of adding catalyst, HHV of solid biofuel was higher and reaction occurred at lower temperature and pressure. Also, HTC solid product had been characterized and found to be hydrophobic, increased HHV (over 40%), and pelletized easily compared to raw material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1057-1058
• /
• 2012

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.149-151
• /
• 2001

This paper presents the results of characteristics of the solid-core and suspension insulators for the reliability estimation. The various analytic techniques. such as ICP, XRD, SEM, EDS, were applied for the purpose. The alumina content of solid-core insulator was less than that of suspension insulator The cristobolite was crystallized only in solid-core insulator. The average pore size of solid-core insulator was larger than that of suspension insulator. However, the numbers of pore were fewer in the solid-core insulator.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.439-442
• /
• 2007

A solid state Hg(Au)/HgO reference electrode was prepared utilizing gold amalgam solid particles. Solid fine powder of the gold amalgam was prepared by chemical reduction of Au(III) with NaBH4 followed by reduction of Hg(II) in the presence of gold fine particles. The solid content in the suspension of the gold amalgam particles and fine mercury oxide particles in DMF containing PVC was precipitated by the addition of a large amount of water to give solid Hg(Au)/HgO/PVC mixture. After drying, the mixture was pressure-molded to a physically stable Hg(Au)/HgO composite reference electrode material. The electrochemical characteristics of the electrode as a reference electrode were very similar to an ordinary Hg/HgO reference electrode. The electrode material can be molded and fabricated in any desired shape and size. The surface can be renewed by a simple polishing process whenever contaminated or deactivated. The applicability of the electrode in the electrochemical detection of carbohydrates after anion exchange separation was evaluated.