• 제목/요약/키워드: Solid/Liquid Absorbent

검색결과 3건 처리시간 0.019초

액상 콜린알포세레이트의 고형 제제화 연구 (Formulation of Liquid Choline Alphoscerate as a Solid Dosage Form)

  • 최성업;조성완
    • 한국산학기술학회논문지
    • /
    • 제14권12호
    • /
    • pp.6324-6329
    • /
    • 2013
  • 본 연구에서는 액상 형태인 콜린알포세레이트를 알루미늄마그네슘규산화합물에 흡착시켜 고형의 제형화가 가능한 콜린알포세레이트를 함유하는 정제의 제조하고 평가하였다. 정제는 콜린알포세레이트 대비 흡착제의 비율을 달리하여 제조하고, 물리적 특성 및 용출률을 조사하였다. 정제의 타정성과 용출률을 고려할 때 흡착제는 주성분 대비 50~75%가 적절하였다. 주성분 대비 62.5%의 흡착제를 사용한 제제에서 정제의 경도, 붕해, 마손도 시험, 용출곡선하면적 비율 결과가 가장 우수하였다. 알루미늄마스네슘규산화합물은 액상 약물의 고형화 설계 시 좋은 소재가 될 수 있을 것이다.

삼중효용 흡수사이클의 성능특성 평가 (evaluation of Performance Characteristic on Triple Effect Absorption Cycle)

  • 권오경
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권6호
    • /
    • pp.782-791
    • /
    • 1998
  • This paper presents a computer simulation of five types of triple effect absorption cycles employ-ing the refrigerant absorbent combinations of NH3/LiNO3 low-pressure type NH3/LiNO3+H2O/LiBr binary two-stage type series flow cycle and two types of parallel flow cycle for H2O/LiBr. The absorption systems is investigated through cycle simulation to obtain the system characteristics with the cooling water inlet temperature approach temperature of absorber loss temperature of absorber and chilled water outlet temperature. The most important characteristic temperature of absorber and chilled water outlet temperature. The most important characteristic of NH3/LiNO3 low-pressure type and a NH3/LINO3+H2O/LiBr binary two-stage type is that it obtains a coefficient of performance higher than the sum of the performance coefficients of its part operating independently. As a result of this analysis the optimum designs and operating conditions were determined based on the operating conditions and the coefficient of performance.

  • PDF

열탈착-저온농축-GC/FID/FPD에 의한 도시 생활폐기물 매립장에서 방출되는 휘발성 유기화합물의 측정에 관한 연구 (Determination of Volatile Organic Compounds emitted from Municipal Solid Waste Landfill Site by Thermal Desorption-Cryofocusing-GC/FID/FPD)

  • 김만구;정영림;서영민;남성현;권영진
    • 분석과학
    • /
    • 제14권3호
    • /
    • pp.274-285
    • /
    • 2001
  • 본 연구는 ppb와 ppt 정도의 농도 수준으로 존재하고 있는 대기 중 휘발성 유기화합물을 분석하기 위해 열탈착-저온농축-GC/FID/FPD를 개발하였다. 그리고 고체흡착제가 충진된 흡착관과 자체 제작한 휴대용 가스채취기를 사용하여 강원도 춘천지역에 위치한 근화동과 혈동리 생활폐기물 매립장에서 배출되는 VOCs를 채취하였다. 저온농축방법으로는 분석컬럼을 직접 저온 농축하는 on-column 저온 농축장치와 0.8mm loop를 이용한 저온농축장치를 서로 비교 검토해 보았다. On-column 저온농축법은 loop에 비해 분리능은 좋으나 흡착관에 채취한 시료를 저온농축할 때 요구되는 50 psi의 높은 탈착압력으로 인해 흡착관의 SwageLok fitting이 마모되어 가스가 새는 문제점이 발생하였다. 이에 반해 탈착압력을 낮추고 탈착유량을 늘리기 위해 설계한 loop 경우에는 탈착압력이 0.4 psi로 on-column에 비해 매우 낮아 가스가 새는 것을 방지할 수 있었다. 열탈착-저온농축-GC/FID/FPD로 분석한 근화동과 혈동리 생활폐기물 매립장에서 검출된 물질로는 toluene, xylene, ethylbenzene등 탄화수소류와 악취물인 styrene, limonene, dimethyl disulfide 등이 검출되었다. 그리고 매립지에서 방출되는 VOCs는 매립되는 폐기물의 조성과 매립기간에 따라 다르게 나타났다. 검출된 화합물은 저온농축-GC/MS를 이용하여 확인하였다.

  • PDF