• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.37-44
• /
• 1996

Water hammer pressure waves were measured in a simplified water piping system with and without arresters and air chambers by the operations of the solenoid valve. Experiments were performed to investigate the effects of the location of the arresters and the effects of the volume of the air chambers on maximum and minimum water hammer pressures and wave frequency for various flow rates.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2251-2256
• /
• 1994

An experimental study was conducted on water hammer phenomena generated by quick valve operations in piping systems of buildings. Transient water hammer pressure waves were measured for three different types of valves, i. e. a ball valve, a solenoid valve, and on one-touch valve. The effects of flow rate and valve closing time on the maximum water hammer pressure were investigated. Based on the experimental results, general design recommendations were provided to prevent water hammer phenomena in piping systems of high-rise apartment buildings.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1066-1072
• /
• 2000

This study is to investigate the pressure wave characteristics and the absorption of maximum and minimum pressure generated by instantaneous valve closure at the end of the straightening copper piping system with and without a water hammer arrester. Experiments were conducted under the following conditions : initial pressure 1~5 bar, flow velocity 0.6~3.0 m/s, water temperature $20^{\circ}C$ and air volume of water hammer arrester $80~180^cm^3$. Experimental results show that the optimum air volume of water hammer arrester is 110㎤.

• Journal of Mechanical Science and Technology
• /
• v.17 no.9
• /
• pp.1339-1348
• /
• 2003

Several factors, including peak dp/dt of the ventricular pressure and maximum closing velocity of leaflet have been studied as indices of the cavitation threshold. In the present study, just before closing velocity of the leaflet has been studied as indices of the cavitation threshold, and cavitation erosion on the surface of a mechanical valve was examined by focusing on squeeze flow and the water hammer phenomenon during the closing period of the valve. A simple solenoid-actuated test device that can directly control the valve closing velocity was developed, and opening-closing tests of 3,000 and 40,000 cycles were performed at various closing velocities. There was a closing velocity threshold to occur erosion pitting of valve surface, and its value was about 0.4 m/s in this study. Cavitation-induced erosion pits were observed only in regions where squeeze flow occurred immediately before valve closure On the other hand, the number of the pits was found to be closely related to an area of water hammer-induced pressure wave below the critical pressure defined by water vapor pressure. Therefore, it was concluded that cavitation is initiated and augmented by the two pressure drops due to squeeze flow and water hammer phenomenon, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.261-266
• /
• 1997

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.195-204
• /
• 1987

The purpose of this study was to investigate the effect of occlusal splints on the masseteric silent period and the changes of the masseteric silent period after experimental bruxism with occlusal splints. In nine subjects, anterior occlusal splints were fabricated. The jaw-jerk reflex was induced by tapping over mandibular symphysis area with solenoid driven hammer and electromyogram of left masseter muscle was recorded. In the recorded electromyogram of left masseter muscle the silent period duration was measured. This procedure was done before insertion of anterior occlusal splints, after insertion of anterior occlusal splints, after 30 min experimental bruxism with anterior occlusal splints, and 3hr after removal of anterior occlusal splints. The result were as follows; 1. The mean silent period duration was increased after insertion of occlusal splints compared with the mean silent period duration before insertion of occlusal splints. 2. There was no change of the mean silent period duration after 30 min experimental bruxism with occlusal splints compared with the mean silent period duration after insertion of occlusal splints. 3. 3hr after the removal of occlusal splints, the mean silent period duration showed no difference from the mean silent period duration before insertion of occlusal splints.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.205-212
• /
• 1987

The purpose of this study was to investigate the duration of the silent period of the masseter muscle in normal subjects after experimental bruxism. The material for this study consisted of 9 male subjects with an age range of 22-24 years who showed normal occlusion clinically and were free from any history or symptoms of temporomandibular joint dysfunction. A jaw-jerk was stimulated by tapping the mandibular symphysis during maximal voluntary clenching with a solenoid-driven hammer. And three separate silent period records were made from the left masseter muscle at the following times: at normal state, after experimental bruxism, 1 week after bruxism. The following conclusions were obtained: 1. The average value of the duration of masseteric silent period during maximal voluntary clenching was $33.62{\pm}1.86msec$ when tap force of approximate 650g was applied at normal state. 2. After experimental tooth grinding for 30 minutes, the duration of masseteric silent period increased to $46.29{\pm}4.40msec$. 3. Comparing the duration of silent period measured at normal state with that measured after 1 week, the duration of silent period showed reproducibility.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.82-92
• /
• 1996

A computer simulation with predict the fuel injection rates and the fuel injection pressure behaviors in diesel engine fuel injection systems would by very useful in designing or improving fuel injection systems. In this paper we developed computer program in order to predict the behaviors of the fuel injection rate and the injection pressure for Electronic Hydraulic Ultra-High Pressure Fuel Injection System. We've applied the continuity and momentum equations for the hydraulic phenomena and the dynamics of individual components of the Electronic Hydraulic Fuel Injection System. To solve all the equations numerically we've applied the Runge-kutta IV method. Water hammer equations were applied for the hydraulic pipe solution, and the method of characteristics was employed in our calculations. The simulation results were compared with the experimental results for: Accumulator pressure, Injection pressure and unjection rate. As a result, The simulation results agree very well with our experimental results. We found that a large accumulator and the high speed solenoid valve were required, and the compression volume of the fuel had to be as small as possible in order to acheive ultra-high pressure fuel injection.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.348-354
• /
• 2008

Egg grading is determined by exterior and interior quality. Among the evaluation methods for the egg quality, a candling method is common to identify eggs with cracked shells and interior defects. But this method is time-consuming and laborious. In addition, practically, it is challenging to detect hairline and micro cracks. In this study, an on-line inspection system based on acoustic resonance frequency analysis was developed to detect hairline cracks on eggshells. A roller conveyor was used to transfer eggs along one lane to the impact position where each of eggs rotated by the roller was excited with an impact device at four different locations on the eggshell equator. The impact device was consisted of a plastic hammer and a rotary solenoid. The acoustic response of the egg to the impact was measured with a small condenser microphone at the same position as the impact device was installed. Two acoustic parameters, correlation coefficient for normalized power spectra and standard deviation of peak resonant frequencies, were used to detect cracked eggs. Intact eggs showed relatively high correlations among the four normalized power spectra and low standard deviations of the four peak resonant frequencies. On the other hand, cracked eggs showed low correlations and high standard deviations as compared to the intact. This method allowed a crack detection rate of 97.6%.