• 한국태양에너지학회 논문집
• /
• 제35권6호
• /
• pp.17-24
• /
• 2015

The MPPT(Maximum Power Point Tracking) techniques are employed in photovoltaic (PV) systems to maximize the PV array output power which depends on solar irradiance and temperature. The dynamic MPPT performance under varying irradiance conditions affects the impact on overall PV system performance. This paper presents the improved MPPT algorithm by the simulation comparison with other algorithms. The simulation models are made by the Matlab & Simulink. The result of simulation, the dynamic MPPT efficiency of proposed algorithm is higher than the other algorithms.

• 천문학회보
• /
• 제38권1호
• /
• pp.64.2-64.2
• /
• 2013

Korea Astnonomy and Space Science Institute (KASI) operates two solar radio observing facilities, the Korean station of the e-CALLISTO and the Korean Solar Radio Burst Locator (KSRBL). The e-CALLISTO station had suffered from tracking problem for past several years. Since 2011, KASI has developed a new tracking system, and recently the antenna has regained the its sun-tracking capability and full day-time coverage. The KSRBL also suffered from the control computer breakdown last year. After one year of operational gap, the KSRBL restored its normal daily observation. We also expanded the data server storage capacity, to store the full original data of 25 ms integration time and 0.25 MHz frequency resolution, amounting to about 80 GB per day.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.717-719
• /
• 2005

This paper summarizes the results of these efforts by of offering the PV generation system with solar tracking. The status of PV generation system with solar tracking components and interconnection and effects are summarized. Hence this paper duscusses only points that might be useful for application.

• 태양에너지
• /
• 제19권4호
• /
• pp.81-91
• /
• 1999

The work presented here is a design and development of sun tracking system for the parabolic dish concentrator. Parabolic dish concentrator is mounted on azimuth and elevation tracking mechanism, and controlled to track the sun with computed and measured sun positions. Sun tracking mechanism is composed of 1/30000 speed reducer(3 stages) and 400W AC servomotor for each axis. The nominal tracking speed of each axis is ${\pm}0.6^{\circ}/sec$ and the system has a driving range of $340^{\circ}$ in azimuth and of $135^{\circ}$ in elevation. Sun tracking control system consists of sun sensor, wind speed and direction measurement system, AC servomotor position control system and personal computer as a master controller. Sun sensor detects the sun located within ${\pm}50^{\circ}$ measured from the sun sensor normal direction. Computer computes the sun position, sunrise and sunset times and controls the orientation of parabolic dish concentrator through the AC servomotor position control system. It also makes a decision of whether the system should follow the sun or not based on the information collected from sun sensor and wind speed and direction measurement system. The sun tracking system developed in this work is implemented for the experimental work and shows a good sun tracking performance.

• 실천공학교육논문지
• /
• 제14권2호
• /
• pp.387-392
• /
• 2022

세계적인 탄소 중립에 동참하고자, 대한민국 정부에서도 '녹색건축물 조성 지원 법' 시행령을 통해 2030년까지 모든 건축물에 대해 제로에너지 건축물 인증을 진행할 계획에 있다. 이에 따라 국가적으로도 비교적 생활 밀접 접근성이 좋은 태양광 발전과 관련한 여러 사업을 지원하고 있다. 특히 지붕 설치형 태양광 발전 시스템의 경우 환경 파괴 없이 유휴 공간을 활용하여 에너지를 생산한다는 측면에서 주목받고 있지만, 다른 태양광 발전 설비 대비 낮은 발전효율이 단점으로 지적되고 있다. 따라서 본 논문에서는 이러한 부분을 해소하고자, 단축형 태양광 추적을 위한 태양광 패널 구조물에 관한 연구를 통해 효율적인 태양광 패널 각도 가변 시스템을 제안하고 더불어 지붕 설치형 태양광 발전 시스템의 적용 환경을 고려해 태양광 패널의 파손 및 2차 피해 예방을 위한 방안을 제안한다. 더불어 ICT 융합을 통해 태양광 패널을 제어, 사고 예측 안전 시스템 구성을 프로젝트 기반의 교육 프로그램 연계 구성이 가능할 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.212-217
• /
• 2020

태양광 발전 시스템은 태양광 패널을 통해 발전된 전력을 계통연계를 통해 전송하는 종합 시스템이다. 발전량을 증대시키는 기술로써 태양광 입사각을 변화시켜 발전량을 증대시키는 추적식 태양광 발전장치 기술이 있다. 본 논문은 입사각을 변화시켜 발전량을 증대시키는 단축 추적식 태양광 발전장치의 구조물과 제어에 관한 연구이다. 핵심 내용은 태양광 구조물이 남북축을 중심으로 동서 방향으로 축회전하도록 구성한 단축 제어장치 및 기술이다. 일출로부터 일몰까지 동서방향으로 태양을 추종하는 태양광 구조물은 구조적 안정성과 태양광 추종 제어 성능 확보가 필요하다. 단축 추적 발전장치는 최대 25% 이상의 발전량 증대를 기대할 수 있다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.457-462
• /
• 2012

Daylighting software is an important component to predict the performance of daylighting system in advance of a field demonstration study with installing them in buildings. PHOTOPIA is a powerful software to generate a candela distribution curve(CDC) of an active daylighting system like a tracking dish concentrator. With PHOTOPIA, a set of candela distribution curves was generated under clear sky conditions and different solar altitude angles. The candela distribution curves were then imported to RADIANCE for rendering and analysis on the daylighting performance of a tracking dish concentrator when it installed in a actual class room without windows. As a result, the daylight collection efficiency of the dish concentrator was 68.4% when we assumed that there was no tracking error. It was found that candela(cd) and total lumens(lm) increased with solar altitude rising, whereas the distribution angle was fixed. The illuminance uniformity on the work plane in the class room was relatively low, 0.12, while the illuminance uniformity on the area of $2.7m^2$ to which the light was illuminated was considerably high, 0.60. The maximum illuminance was 1,340lux with a solar altitude angle of 80 degrees.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1177-1183
• /
• 2012

본 연구의 목적은 형상계수와 태양추적장치를 이용하여 헬리오스타트에서 흡수기로 복사열전달이 최대화 될 수 있는 시스템을 개발하는 것이다. 헬리오스타트에서 타워 상단에 위치한 흡수기로의 열전달은 대부분 복사에 의해 일어나기 때문에, 복사 열전달에서 사용되는 형상계수를 헬리오스타트 제어에 이용하였다. 태양 추적 및 태양 위치 계산은 CdS 센서와 시뮬링크 프로그램을 이용하였다. 시뮬링크 프로그램을 이용하여 실시간으로 헬리오스타트, 흡수기, 태양 사이의 형상계수가 최대화되는 알고리즘을 적용함으로서, 헬리오스타트에서 흡수기로의 복사 열전달이 최대화 될 수 있도록 하였다. 또한 다양한 조건에 따른 헬리오스타트 제어에 필요한 각을 시뮬레이션 함으로서 각 조건에 필요한 각을 도출할 수 있었다.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.376-386
• /
• 2013

This paper proposes an improved Maximum Power Point Tracking method and design methods of unmanned solar vehicle system by parts of hardware, unmanned driving control and power conversion. The hardware design is offered on the weight reduction and structural reliability by using structural analysis software. The technique of curve fitting is applied to unmanned control system due to minimizing the vehicle's behavior. Furthermore, lateral controller applying actuator dynamics is robust enough to prevent performance degradation by measurement noise regarding position and heading angle. The power conversion system contains battery charger system and tapped-inductor boost converter. In the battery charger system, variable step-size MPPT is conducted for quick response of maximum power point tracking. The validity of the proposed algorithm are verified by simulations and experiments.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.315-318
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy control order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.