• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.433-434
• /
• 2008

Until now, many studies have been carried out on $TiO_2$ electrode, counter electrode, sensitizer and electrolyte to improve dye-sensitized solar cell(DSSC)'s performance. It was known that surface area of the $TiO_2$ are of paramount importance in determining the cell efficiency. In this experiment, $TiO_2$ working electrodes were sintered at four different temperatures (400, 450, 500 and $550^{\circ}C$) for 55 minutes in ambient atmosphere. Also these electrodes were sintered at four different times (40, 55, 70, 85minutes) in temperature where shows the highest efficiency. I-V characteristics of DSSC made up of different working electrodes were studied using solar simulator.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.19-25
• /
• 2012

About supply and demand to see that you need to match, the limitations of wind power capacity is low demand and the commitment of the general generator will exist between the minimum generation. if the turbine's output can be controlled, The limitation of wind power capacity will be adopted based on instant power generation. Namely, The minimum limits of wind power generation based load operation by calculating the amount that is higher than if the output should be restricted to highest operation. in this paper, we committed to the demand for low enough that the combination of the general generator of wind power capacity to accommodate the operation of determining whether the limit is intended to. For this, power system analysis program PSS/E was used, Jeju system by implementing the model simulations were performed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.453.2-453.2
• /
• 2014

그래핀을 수직으로 성장한 형태인 탄소나노월(Carbon nanowall; CNW)은 탄소를 바탕으로 하는 다른 나노물질에 비해 표면적이 상당히 넓은 물질로 전극에 활용하여 소자 성능향상을 기대 할 수 있다. 또한 탄소를 기반으로 하는 나노 구조물중에서 가장 높은 표면밀도를 가진다. CNW를 차세대 염료감응형 태양전지(Dye sensitised solar cells; DSSC)의 상대전극으로 사용한다면 기존대비 광변환 효율을 향상시킬 수 있어 새로운 상대전극으로 활용 가능하다. 또한 CNW는 다른 촉매 없이 직접성장이 가능함으로 불순물 제거공정이 필요하지 않고, 공정시간이 짧아 대량생산에 용의하다. 본 연구에서는 마이크로웨이브 PECVD 장비를 사용하고 메탄(CH4)을 반응가스로 사용하여 CNW 하부전극을 제조하였다. CNW 하부전극의 광 변환효율을 관찰하기위해서 합성시간을 변화를 주었다. 제조된 DSSC의 광 변환 효율을 측정하기 위해 Solar simulator 장비를 사용하여 제작된 cells의 효율을 측정하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.58.1-58.1
• /
• 2011

CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성으로 고효율 태양전지 제조가 가능하여 태양전지용 광흡수층으로 매우 이상적이다. 미국 NREL에서는 이러한 CIGS 태양전지를 Co-evaporation 방법으로 제조 20%이상의 에너지 변환 효율을 달성하였다고 보고하였다. CIGS 태양전지의 경우 기존의 유리 기판 대신 유연한 철강 기판을 사용해 태양 전지를 flexible하게 제조 할 수 있다는 장점이 있다. 이러한 flexible 태양전지의 경우 기존의 rigid 태양전지의 적용분야 뿐만 아니라 BIPV, 선박, 장난감, 군용, 자동차등 더욱 더 많은 분야에 활용이 가능하다. 본 연구에서는 기존의 rigid한 기판인 soda lime glass와 flexible 기판인 stainless steel 기판으로 소자를 제조하여 효율을 비교 분석 및 stainless steel 기판의 표면 처리 방법에 따라서 표면 조도의 특성을 분석하여 stainless steel 기판별 효율 특성도 비교 분석 하였다. 후면전극으로는 약 $1{\mu}m$의 Mo를 DC Sputtering 방법을 이용하여 증착하였고, CIGS 광흡수층은 약 $2.5{\mu}m$의 두께로 미국의 NREL과 같은 3 stage 방식을 이용하여 광흡수층을 Co-Evaporation 방법으로 제조하였고, 버퍼층인CdS는 약 50nm의 두께로 CBD 방법으로 제조 하였으며, 창층인 ZnO는 약 500nm 두께로 RF Sputtering 방법으로 제조 하였고, 마지막으로 약 $1{\mu}m$ 두께의 Al 전면전극은 Thermal Evaporation 방법으로 제조 하였다. 소자의 물리적, 전기적 특성을 분석하기위해 FE-SEM, AFM, Solar Cell Simulator 분석을 실시하였다.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.8-13
• /
• 2009

In this paper, two configurations of PV array are analyzed and tested under shading condition, where two configurations are series-parallel and total-crass-tied configuration. Each photovoltaic module is emulated by two 5 inch po1y-crystalline cells in series and an array is constructed by connecting 24 of the modules to compare a generated maximum power of the two configurations. Pspice and Sun simulator. PASAN IIIb, are used for simulation and experiment to test the array under various partial shading conditions. Test results show the total-cross-tied configuration generates 7.63% higher maximum power than the series-parallel configuration, and it is well matched to the analysis and simulations of the two configurations.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.16-21
• /
• 2011

Since the maximum power operating point(MPOP) of PCS alters with changing atmospheric conditions temperature conditions shadow conditions it is important to operate for PCS to keep maximum power point tracking(MPPT) continuously. This paper presents the results of modeling PV system by PSIM simulator and investigates the influence on the PV system from aspect of power quality i.e. voltage drop. This paper investigates four MPPT algorithms; Perturbation & Observation(P&O) Improved P&O Incremental Conductance(Incond) Differential coefficient method simulated with irradiation temperature change and shadow conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.490.2-490.2
• /
• 2014

Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.306.1-306.1
• /
• 2016

ZnO semiconductor material has been widely utilized in various applications in semiconductor device technology owing to its unique electrical and optical features. It is a promising as solar cell material, because of its low cost, n-type conductivity and wide direct band gap. In this work ZnO/Si heterojunctions were fabricated by using pulsed laser deposition. Vacuum chamber was evacuated to a base pressure of approximately $2{\times}10^{-6}Torr$. ZnO thin films were grown on p-Si (100) substrate at oxygen partial pressure from 5mTorr to 40mTorr. Growth temperature of ZnO thin films was set to 773K. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnO target, whose density of laser energy was $10J/cm^2$. Thickness of all the thin films of ZnO was about 300nm. The optical property was characterized by photoluminescence and crystallinity of ZnO was analyzed by X-ray diffraction. For fabrication ZnO/Si heterojunction diodes, indium metal and Al grid patterns were deposited on back and front side of the solar cells by using thermal evaporator, respectively. Finally, current-voltage characteristics of the ZnO/Si structure were studied by using Keithly 2600. Under Air Mass 1.5 Global solar simulator with an irradiation intensity of $100mW/cm^2$, the electrical properties of ZnO/Si heterojunction photovoltaic devices were analyzed.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.6
• /
• pp.303-307
• /
• 2015

Multilayered films of ITO (In₂O₃:SnO₂ = 9:1)/SiO₂ were deposited on soda-lime glass by RF/DC magnetron sputtering at 500℃ to improve the energy conversion efficiency of dye-sensitized solar cells (DSSCs). The light absorption of the dye was improved by decrease in light reflectance from the surface of the DSSCs by using an ITO film. In order to estimate the optical characteristics and compare them with experimental results, a simulation program named EMP (essential macleod program) was used. EMP results revealed that the multilayered thin films showed high transmittance (approximate average transmittance of 79%) by adjusting the SiO₂ layer thickness. XRD results revealed that the ITO and TiO₂ films exhibited a crystalline phase with (400) and (101) preferred orientations at 2 θ = 26.24° and 35.18°, respectively. The photocurrent-voltage (I-V) characteristics of the DSSCs were measured under AM 1.5 and 100 mW/cm² (1 sun) by using a solar simulator. The DSSC fabricated on the ITO film with a 0.1-nm-thick SiO₂ film showed a Voc of 0.697 V, J_sc of 10.596 mA/cm² , FF of 66.423, and calculated power conversion efficiency (η_AM1.5) of 5.259%, which was the maximum value observed in this study.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.190-193
• /
• 2001

In order to verify the efficiency or availability and stability of photovoltaic(PV) generation systems, huge system apparatuses are needed, in general, in which an actual size of solar panel, a type of converter system and some amount of load facilities should be installed in a particular location. It is also hardly possible to compare a Maximum Power Point Tracking (MPPT) control scheme with others under the same weather and load conditions in an actual PV generation system. The only and a possible way to bring above-mentioned problem to be solved is to realize a transient simulation scheme for PV generation systems using real weather conditions such as insolation and surface temperature of solar cell. The authors, in this paper, introduces a novel simulation method, which is based on a real-time digital simulator (RTDS), for PV generation systems under the real weather conditions. Firstly, VI characteristic equation of a solar cell is developed as an empirical formula and reconstructed in the RTDS system, then the real data of weather conditions are interfaced to the analogue inputs of the RTDS. The outcomes of the simulation demonstrate the effectiveness of the proposed simulation scheme in this paper. The results shows that the cost effective verifying for the efficiency or availability and stability of PV generation systems and the comparison research of various control schemes like MPPT under the same real weather conditions are possible.