• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.229-235
• /
• 2019

지구 환경문제와 자원 고갈에 따른 에너지 위기로 인해 화석 연료를 사용하지 않아 이산화탄소와 같은 온실가스 배출이 없는 청정 에너지원으로서 신재생 에너지는 중요성이 강조되고 있다. 부유식 태양광발전은 기존의 태양광 발전기술과 플로팅 기술을 융합한 신개념의 발전 방식이다. 종래의 육상이나, 건축물이 아닌 유휴수면에 설치하는 재생에너지원으로 구조체, 계류장치, 태양광 발전설비, 수중케이블 등으로 구성된다. 또한 단위모듈 형태로 설계되어 발전용량에 따라 단위모듈을 서로 연결하여 대규모 발전 시설을 조성할 수 있다. 태양광 발전기는 옥외에 설치되기 때문에 구조물에 대한 풍하중의 영향이 매우 크다. 본 연구에서는 부유식 태양광 발전 구조물에 큰 영향을 주는 풍하중을 전산유체역학을 통해 해석하였다. 유동 특성과 풍하중에 대한 풍향과 경사각의 영향을 분석하였다. 모듈의 개수와 바람의 방향에 따라 최대 하중을 받는 위치와 크기 그리고 태양광 패널과 부유체 주위의 유동 특성을 구하였다. 태양광 패널의 지면에 대한 경사각이 클수록 풍하중은 증가하였다.

• 한국컴퓨터정보학회논문지
• /
• 제26권11호
• /
• pp.11-19
• /
• 2021

본 논문은 충전식 배터리의 단점을 보완하여 급속 충전과 방전이 가능하고 높은 전력 효율 및 반영구적인 충·방전 사이클 수명의 특성을 갖는 수퍼커패시터를 보조 전력 저장장치로 사용하여 전력 관리 시스템에 결합한 프로토타입 플랫폼을 제안한다. 본 논문의 플랫폼을 위해 물리적인 환경 변화에 따른 태양광 패널에서의 공급 전력 차단 혹은 재개 상태를 마이크로컨트롤러에 연결된 인터럽트를 통해 감지할 수 있는 기법을 개발하였다. 연속적인 전원 공급이 보장되지 않는 컴퓨팅 환경에서 데이터의 유실을 방지하기 위해 전원 공급이 차단되는 경우 휘발성 메모리에 있는 프로그램 문맥 및 데이터를 비휘발성 메모리로 이전하는 낮은 수준의 시스템 소프트웨어를 마이크로컨트롤러에 구현하였다. 실험을 통해 슈퍼커패시터가 보조 전력 저장장치로서 일시적 전원 공급에 효과적으로 하는지를 검증하였으며 다양한 벤치마크를 통해 전원 상태 감지 및 휘발성 메모리에서 비휘발성 메모리로의 프로그램 문맥 및 데이터의 이전 기법이 낮은 오버헤드를 갖음을 확인하였다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.299-300
• /
• 2011

태양에너지를 에너지 공급원으로 하고 LED 램프를 조명용 광원으로 사용하여 적은 전력 소모와 연장된 램프의 수명으로 에너지 소모를 크게 줄이고, 유지 보수 관리 비용을 획기적으로 줄일 수 있는 LED 조명제어시스템을 개발하였다. 점등 회로, 구동회로 등의 최적화된 설계와 구성으로 광 변환 효율을 높여 소형화, 경량화 되도록 하고, 환경 친화적인 조명 광원으로서 효율적인 성능을 얻을 수 있도록 한다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.53-56
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1269-1276
• /
• 2014

The main objective of this paper is to design DC-DC MPPT circuit using chaotic pulse width modulation to track maximum power from solar PV module for space application. The direct control method of tracking is used to extract maximum power. The nominal duty cycle of the main switch of DC-DC SEPIC converter is adjusted so that the solar panel output impedance is equal to the input resistance of the SEPIC converter which results better spectral performance in the tracked voltages when compared to conventional PWM control. The conversion efficiency of the proposed MPPT system is increased when CPWM is used as a control scheme

• International Journal of Computer Science & Network Security
• /
• 제22권5호
• /
• pp.67-72
• /
• 2022

There has been a significant growth in global population and industrialization, as a consequence demand for electricity is increasing rapidly and the power systems need to increase the electricity generation. Currently, most of generated electricity is generated from fossil fuels. However, there are many financial and environmental concerns associated with the generation of electricity from such resource. Photovoltaic )PV) solar as a renewable resource is promising. The power output of PV systems is mainly affected by the solar irradiation and ambient temperature. This paper attempts at reducing the burden and improving the accuracy of the extensive simulations related to integrating PV systems into the electrical grid.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.136-137
• /
• 2017

Maximum power point tracking (MPPT) under partial shading condition (PSC) is a challenging process in the PV array system. The shaded PV panel makes different peak patterns on the P-V curve and misguides the MPPT algorithm. Various kinds of global MPP (GMPP) detecting algorithms are used to overcome this issue. Generally, too frequent execution of GMPP tracking algorithm reduces the achievable power of PV panel due to time spent on the scanning process. Thus, partial shading detection algorithm is essential for efficient utilization of solar energy source. While conventional method only detects fast shading patterns, the proposed algorithm always shows superb performance regardless of the speed of partial shading patterns.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.104-113
• /
• 2015

This paper focuses on a temperature effects on a PV panel which has been installed in Thailand. The main objective is cleaning PV panels and reduce temperature of PV panel by water injects from waterway and experimental results of PV power what it is difference. This project is designed by PLC control system which water injects and control PV temperature, In addition, this project consists of hardware and software such as water pump, water injection and PLC control has been automatically and it can be control system manually. The automatic control system is working when PV temperature rises up over 45 degree Celsius after that the pumping machine would inject water to the surface of PV panels and it must be stop when the PV panel temperature comes down less than 45 degree Celsius. The result of actual experimental found that the control system has been done correctly under specify condition. The experimental has been shown electrical data before and after water injects on PV system found that the electrical power a bit increases and The energy has been taken from PV panel less than energy consumption equipment of control system which taken to operate the water injecting system.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.23-27
• /
• 2011

In this paper, material handing cleanroom stocker system for thin film solar cell line of photovoltaic industry and liquid crystal display line of flat panel display industry was selected for the study. Optimum solution for stocker system's CPS(Contactless Power Supply) is approached by changing the motion pattern, optimizing design & production, and analyzing characteristics of the power system. As a result, acceleration time of X-Axis changed from 3 sec to 4 sec, changed the input characteristic of CPS within approximately 11[kW]. This result shows that extending acceleration time of the X-Axis in Stocker Crane's motion pattern can reduce the capacity of the CPS, thus saving the manufacturing cost.

• 한국태양에너지학회 논문집
• /
• 제27권1호
• /
• pp.91-98
• /
• 2007

Perimeter zone is one of the weakest area in buildings and it makes an increase of heating and cooling loads, in addition to condensation or discomfort with cold-draft to residents in winter. Because of this, it needs to be reinforced by active systems. However, they use fossil fuel, and ultimately greenhouse effect is urged. Thus, we proposed BIPV system functioned as solar collector which can substitute active system. As an fundamental stage, heat balance equation in steady-state by Fortran was used not only, in winter for pre-heating effect and electric power capacity during the day, but also in summer, for the latter during the day and sky radiation effect during the night. Especially, we should have considered shading on PV by IES Suncast, since even a little bit of it makes the efficiency too low for the PV modules to work. As a result, in summer day, the PV panel should be tiled in 70 degrees to gain the most electric power. Moreover, we could verify that this model makes higher temperature and heat flux under 0.02 m/s. On the other hand, the PV had the high efficiency with high velocity because of cooling effect behind the PV. Therefore, we should regard the air current distribution later on.