• 설비공학논문집
• /
• 제14권11호
• /
• pp.907-913
• /
• 2002

An experimental study on energy density distributions produced by dish solar concentrating system was performed to optimally design and rightly position a cavity receiver. This deemed also very useful to find and correct various errors associated with a concentrator. It is observed that the actual focal length is 2.17 m with a maximum energy density of 1.89 MW/$m^2$. By evaluating the position of flux centroid, it was found that there are errors within 2 cm from the target center. As a result of the percent power within radius, approximately 90% of the incident radiation is intercepted by about 0.06 m radius. The area concentration ratio normalized to 800 W/$m^2$ insolation and 90% mirror reflectivity was 347 suns. The total integrated power of 2467 W was measured under focal flux distributions, which corresponds to the intercept rate of 85.8%.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.130-133
• /
• 2012

The Korea Institute of Energy Research(KIER) has began collecting solar radiation components data since January, 1988, and solar radiation classified wavelength data since November, 2008. KIER's solar radiation components and classified wavelength data will be extensively used by concentrating solar energy system users or designers as well as by research institutes.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.571-575
• /
• 2006

To improve economic of solar power generation, stirling engine is required continuous operation and the receiver has to be provided with an additional combustion system. The hybrid receiver with a specially adapted combustion system is possible to 24 hr/day operation by solar and gas-fired. The inner cavity and external wall serve as absorber surfaces using collected irradiation and heat transfer surfaces for the gas heat flow, respectively. The hybrid receiver was designed and fabricated for the dish/stirling system. The analytical method for pridicting natural convective heat loss from receiver is used. The Koenig and Marvin model is used to estimate convection heat loss and heat transfer coefficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.129.2-129.2
• /
• 2011

Knowledge of the detailed solar radiation components are essential for modeling many solar systems. This is particularly the case for applications that concentrate the incident energy to attain high photo-dynamic efficiency achievable only at the higher intensities. In order to estimate the performance of concentrating solar systems, it is necessary to know the intensity of the beam radiation, as only this component can be concentrated. The Korea Institute of Energy Research(KIER) has began collecting detailed solar radiation component data since August, 1988. KIER's component data will be extensively used by solar system users or designers as well as by research institutes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.218-219
• /
• 2007

Silicon feed stock shortage have acted as major restraints for growth of photovoltaic industry. Concentrating photovoltaic (CPV) system will reduce the use of silicon PV materials. This paper presents the application possibility of mono-crystalline silicon solar cell, which has increased in market share, for PV concentrator. We measured the power of solar cell using sun simulator and I-V curve tracer and compared the results. The comparison of results showed that the concentrated solar cell generated the power more approximately 7 times than without concentration in spite of non-heat sink. If CPV technology included heat sink combines already developed PV tracking system, it will have a merit economically.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.12-18
• /
• 2009

The Knowledge of the solar radiation components are essential for modeling many solar energy systems. This is particularly the case for applications that concentrate the incident energy to attain high thermodynamic efficiency achievable only at the higher temperatures. In order to estimate the performance of concentrating thermal systems, it is necessary to know the intensity of the beam radiation, as only this component can be concentrated. The Korea Institute of Energy Research(KIER) has began collecting solar radiation component data since January, 2002. KIER's component data will be extensively used by concentrating system users or designers as well as by research institutes. The theoretical analysis of solar radiation as a component has compared with the experimental data obtained by the KIER station. The Result of simulation analysis shows that the annual-average daily diffuse radiation on the horizontal surface is $1,457cal/m^2$ and daily direct radiation on the horizontal surface is $1,632cal/m^2$ for all over the 16 areas in Korea.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.53-62
• /
• 2006

Since the direct normal radiation and clear day are a main factor for designing any solar thermal and photovoltaic concentrating system, it is necessary to evaluate its characteristics all over the country. The work presented here are the investigation of direct normal radiation and clear day in Korea. The data utilized in the investigation consist of direct normal radiation collected for 14 years('90. 12${\sim}$2004. 12) and clear-day collected for 23 years($1982{\sim}2004$) at measuring stations across the country. The analysis shows that the annual-average daily direct normal radiation is 5.4 kWh/m2 and the annual-average total clear-day is 92.7 days in Korea. We also constructed the contour map of direct normal radiation and clear-day in Korea by interpolating actually measured data across the country.

• 한국항공우주학회지
• /
• 제43권4호
• /
• pp.318-325
• /
• 2015

극초소형 위성은 극히 제한적인 크기로 인하여 태양전지판 장착을 위한 표면적이 제한적이다. 또한 자세제어 방식에 따라서는 태양전지판에 대한 태양 입사각이 계속적으로 변화하며 이는 전력생성에 있어 주요 변수이다. 본 논문에서는 태양전지판에 대한 태양입사각이 전력생성에 불리한 조건에도 프레넬렌즈를 이용해 전력생성효율 향상이 가능한 극초소형 위성용 집광형 태양전력시스템을 제안하였다. 제안된 집광형 태양전력시스템의 전력생성효율 극대화 가능성 입증을 위하여 태양광 모사기와 상용 프레넬렌즈를 이용한 전력측정시험을 수행하였으며, 시험결과를 기반으로 상용 S/W인 STK를 활용해 영구자석 안정화 자세제어 방식이 적용된 극초소형 위성의 궤도 전력생성효율 분석을 수행하였다.

• 한국태양에너지학회 논문집
• /
• 제30권6호
• /
• pp.28-33
• /
• 2010

Solar collectors to be applied are mainly flat-plate or vacuum tube collector which is used for hot water supply of house because of low heat value and low temperature. There are a necessity to expand applicable scope of solar collector into the industrial process heat source and air conditioner for coping with renewable energy policy of government and industrial trend. This study is to analysis the performance of PTC solar collector of concentrating type and flat-plate of non-concentrating. For this, temperature difference and heating value as insolation of air outside is measured from these two collectors mounted on 2-axial solar tracking system. It is investigated that temperature profile obtained from PTC solar collector is uniform and collecting heat per unit area is 6.8kcal/$m^2$ min which is about 3 times with compare to flat-plate collector of 2kcal/$m^2$min. Also the amount of heat to be produced from PTC solar collector is 3 Mcal/$m^2$ which is about 2 times with compare to flat-plate collector of 1.5Mcal/$m^2$ as a result of operating these two collectors during one month. Therefore, it is obtained that heat collecting performance of PTC solar collector is superior to flat-plate.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.141-153
• /
• 2005

PV 태양광 발전은 PV 재료가 고가이므로 일반 전력비용에 비해 상대적으로 비용이 높아진다. 저가형 광학 집광기술과 PV를 통합하게 되면, 비용뿐만 아니라 설치면적 등에서 유리하게 되나, 집광기의 단점이 함께 추가되게 된다. 집광기는 작은 수광각과 송신광선을 갖고 있어 PV 모듈에 필요한 태양광, 광학손실의 손실정도를 최소화하기 위한 신중한 시스템 디자인과 2축형 트레킹 장치가 필요하다. 고정식 비집광 시스템보다 더 많은 에너지를 얻기 위해서는 광학시스템의 손실율을 줄이고, 고효율의 PV 모듈을 이용한 PV셀의 상호연결이 필요하다. 본 논문에서는 우선, 비이미지 프레넬 렌즈 집광기를 사용한 PV 시스템에 대하여 간단하게 설명한 후, 출력전력값을 이론적으로 예측하고 PV 효율과 시스템 성능을 제시하였다. 프레넬 렌즈 선형 집광기 통합 PV 시스템과 비집광 PV 모듈의 출력전력값과 시스템 비용을 비교하면, PV 전력비용을 줄일 수 있는 집광기의 이용이 유용한 것을 알 수 있다. 따라서, 집광형 PV 시스템은 미래의 에너지 이용에 매우 유리한 시스템이라 할 수 있다.