• 제목/요약/키워드: SolE

검색결과 384건 처리시간 0.026초

Study on Optical Characteristics of Nano Hollow Silica with TiO2 Shell Formation

  • Roh, Gi-Yeon;Sung, Hyeong-Seok;Lee, Yeong-Cheol;Lee, Seong-Eui
    • 한국세라믹학회지
    • /
    • 제56권1호
    • /
    • pp.98-103
    • /
    • 2019
  • Optical filters to control light wavelength of displays or cameras are fabricated by multi-layer stacking process of low and high index thin films. The process of multi-layer stacking of thin films has received much attention as an optimal process for effective manufacturing in the optical filter industry. However, multi-layer processing has disadvantages of complicated thin film process, and difficulty of precise control of film morphology and material selection, all of which are critical for transmittance and coloring effect on filters. In this study, the composite $TiO_2$, which can be used to control of UV absorption, coated on nano hollow silica sol, was synthesized as a coating material for optical filters. Furthermore, systematic analysis of the process parameters during the chemical reaction, and of the structural properties of the coating solutions was performed using SEM, TEM, XRD and photo spectrometry. From the structural analysis, we found that the 85 nm nano hollow silica with 2.5 nm $TiO_2$ shell formation was successfully synthesized at proper pH control and titanium butoxide content. Photo luminescence characteristics, excited by UV irradiation, show that stable absorption of 350 nm-light, correlated with a 3.54 eV band gap, existed for the $TiO_2$ shell-nano hollow silica reacted with 8.8 mole titanium butoxide solution. Transmittance observed on substrate of the $TiO_2$ shell-nano hollow silica showed effective absorption of 200-300 nm UV light without deterioration of visible light transparency.

주석산화물 에어로겔의 Graphene Oxide 첨가에 따른 광촉매적 Rhodamine B 분해 (Effect of Graphene Oxide Addition to Tin Oxide Aerogel for Photocatalytic Rhodamine B Degradation)

  • 김태희;최하령;김영훈;이지훈;박형호
    • 마이크로전자및패키징학회지
    • /
    • 제28권1호
    • /
    • pp.61-66
    • /
    • 2021
  • SnO2는 3.6 eV를 갖는 반도체 물질로 광촉매 특성을 보유하고 있는 물질이다. 광촉매 특성을 극대화하기 위해 3차원 에어로겔 화를 통하여 높은 비표면적을 확보하고자 epoxide-initiated sol-gel method를 기반으로 하여 주석 산화물 에어로겔을 합성하였다. 좀더 향상된 비표면적을 구현하고자 합성공정 중 겔화전에 graphene oxide (GO) flake의 첨가를 통해 정렬된 기공구조와 결과적으로 높은 비표면적을 확보할 수 있었다. 0.5 wt%의 GO flake의 첨가로 에어로겔 복합체의 비표면적을 약 1.7배 향상시키는 결과를 도출하였다. 이렇게 향상된 비표면적을 기반으로 Rhodamine B 염료의 분해효과를 흡수광 intensity 변화를 관찰하여 정성적으로 광촉매 효율을 비교 분석하였다. 가장 높은 비표면적을 갖는 0.5 wt%의 복합체는 120분에 67.3%의 분해 효율을 확보하였다. 또한, GO를 첨가하지 않은 SnO2 에어로겔 보다 약 2배 향상된 reaction rate를 보유하였다.

전과정 분석을 통한 자동차엔진 재제조시 온실가스 저감효과 분석 (An Analysis of Greenhouse Gas Reduction effect of Automotive Engine Re-manufacturing throug Whole Process Analysis)

  • 박지형;이한솔;황용우;김영춘;이충근
    • 자원리싸이클링
    • /
    • 제32권2호
    • /
    • pp.43-51
    • /
    • 2023
  • 본 연구에서는 자동차엔진의 신품제조시와 재제조시 발생하는 환경영향을 전과정 관점에서 산정하고 이를 기반으로 온실가스 저감효과를 산정하였다. 자동차엔진 원부자재 원료취득 및 제조공정에서 배출되는 온실가스량은 신품제조시 약 3,473 kg, 재제조시 약 872 kg으로 재제조를 통해 저감되는 온실가스량은 약 2,601kg으로 나타나 폐기 단계를 제외한 전과정 측면에서 저감효과가 있는 것으로 분석되었다. LCA 가중화 분석 결과 신품 제조시 환경영향은 1.07E+03 Eco-point, 재제조시 2.67E+02 Eco-point로 나타났으며, 주요 6대 영향 범주 중 지구온난화 점유비율이 99.72%, 99.68%로 높게 나타났다.

Protective effect of Lycium barbarum leaf extracts on atopic dermatitis: in vitro and in vivo studies

  • Han Sol Lee;Eun Young Bae;Sun Yung Ly
    • Nutrition Research and Practice
    • /
    • 제17권5호
    • /
    • pp.855-869
    • /
    • 2023
  • BACKGROUND/OBJECTIVES: Atopic dermatitis (AD) is a chronic disease with an increasing incidence globally; therefore, there is a growing demand for natural compounds effective in treating dermatitis. In this study, the protective effects of Lycium barbarum leaves with and without chlorophyll (LLE and LLE[Ch-]) on AD were investigated in animal models of AD and HaCaT cells. Further, we investigated whether LLE and LLE(Ch-) show any differences in physiological activity. MATERIALS/METHODS: AD was induced by 2,4-dinitrochlorobenzene (DNCB) for three weeks, while NC/Nga mice were fed LLE or LLE(Ch-) extracts for 7 weeks. Serum immunoglobulin E (IgE) and cytokine (tumor necrosis factor [TNF]-α, interleukin [IL]-6, and IL-4) concentrations and the degree of DNA fragmentation in lymphocytes were examined. A histopathological examination (haematoxylin & eosin staining and blue spots of toluidine) of the dorsal skin of mice was performed. To elucidate the mechanism of action, the expression of the thymus and activation-regulated chemokine (TARC) and macrophage-derived chemokine (MDC) were measured in HaCaT cells. RESULTS: Serum IgE and cytokines (TNF-α and IL-6) levels as well as DNA fragmentation of lymphocytes were significantly decreased in AD-induced mice treated with LLE or LLE(Ch-) compared to those of the control group. The epidermal thickness of the dorsal skin and mast cell infiltration in the LLE group significantly reduced compared to that in the control group. The LLE extracts showed no cytotoxicity up to 1,000 ㎍/mL in HaCaT cells. LLE or LLE(Ch-)-treated group showed a reduction of TARC and MDC in TNF-α-and IFN-γ-stimulated HaCaT cells. CONCLUSIONS: These results suggest that LLE potentially improves inflammation by reducing the expression of chemokines that inhibit T helper 2 cell migration. LLE(Ch-) showed similar effects to LLE on blood levels of IgE, TNF-α and IL-6 and protein expression in HaCat cells, but the ultimate effect of skin improvement was not statistically significant. Therefore, both LLE and LLE(Ch-) can be used as functional materials to alleviate AD, but LLE(Ch-) appears to require more research to improve inflammation.

Process Study on Alumina-zirconia Nanocomposite via Ammonolysis Route

  • Naoya Enomoto;Tang, Jun-Mu;Masato Uehara;Hideaki Maeda;Junichi Hojo;Nakagawa, Zenbe-e
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
    • /
    • pp.143-150
    • /
    • 2000
  • Wet-chemical process using ammonia to precipitate aluminum ion dissolved in a zirconia sol solution is examined. Formation of crystalline bayerite is unfavorable for fine dispersion of zirconia nanoparticles in alumina matrix after heat treatment. To avoid the bayerite formation, it was preferred to make a precipitation with a diluted ammonia or with an ammonia gas flow at high temperature. By optimizing the precipitation process and the calcination temperature, we successfully prepared the uniform microstructure in which tetragonal zirconia particles of ∼30nm is finely dispersed within the alumina grains.

  • PDF

SoIP(Surveillance over IP)와 표준화 (Surveillance over IP and its standardization)

  • 김춘규
    • 한국통신학회논문지
    • /
    • 제30권7B호
    • /
    • pp.464-468
    • /
    • 2005
  • DVR 산업은 전 세계적으로 특별한 표준화의 노력 없이 독자적인 시스템을 가지고 성장하여 왔다. 기기의 설치가 소규모이고 보안 시스템이라는 측면 때문에 표준화의 필요성이 크지 않았다. 보안이라는 측면에서는 비 표준화가 합당할 수도 있으나 IP 를 이용한 surveillance 시장으로 진입하는 과정에서 다양한 IP 기기 (영상 전화기, IP-PBX 등)와의 상호 접속에 따른 표준화의 필요성이 절실해졌다. 본 고에서는 이러한 필요성에 따라 SIP (Session Initiation Protocol) 기반의 세션 제어 기능을 탑재한 IP surveillance 시스템을 구축하고 보안 이외의 응용 가능성을 살펴보았다.

ITO 기판 위의 PLZT 박막의 전기 및 광학 특성에 관한 연구 (A Study on Electrical and Optical Characteristics of PLZT Thin Films Deposited on ITO-glass)

  • 강종윤;최형욱;백동수;박용욱;박창엽
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 춘계학술대회 논문집
    • /
    • pp.39-42
    • /
    • 1995
  • In this study, PLZT thin films prepared by Sol-Gel method were deposited on ITO glass by spin coating and cryatallized at 750$^{\circ}C$ for 5 min by RTA in oreder to investigate their electrical and optical properties. Although thin film experieneced narrowing their hysteresis loops with increasing La content, E$\sub$c/ and P.sub r/ were higher for thin film than for bulk materials. $\varepsilon$$\sub$r/ and optical transmittance increased with increasing La content.

  • PDF

1,4-Diketo-3,6-Diphenyl-Pyrrolo-[3,4c]-Pyrrole(DPP)계 유기안료의 합성 및 흡수스펙트라 (Synthesis and Absorption Spectra of 1,4-Diketo-3,6-Diphenyl-Pyrrolo-[3,4c]-Pyrrole)

  • 김성훈
    • 한국인쇄학회지
    • /
    • 제14권1호
    • /
    • pp.1-15
    • /
    • 1996
  • In this paper, the preparation of lead zirconium titanate(PZT) thin film by sol-gel processing was descried. Thin film coated with thickness of 4${\mu}{\textrm}{m}$ on the stainless steel substrates using the multiple spin-coating process. The crystalline phases of PZT powder and film were investigated by X-ray diffraction pattern and PZT thin film has perovskite structure over 600 C annealing temperature. Corona charging characteristics of the ferroelectric PZT thin film at 600 C were investigated by electrophotographic measurement. A difference in the charging characteristics between positive and negative corona charging was found. The charge acceptance depended in the polarity of corona and the poling of film. According to the D-E hysteresis measurment, PZT thin film can be poled by corona charging without use of top electrode. The remnant polarization in the PZT thin film is generally in the order of 48$\mu$C/$\textrm{cm}^2$. From this results, the ferroelectric PZT thin film will be possible to apply for the add-on type imaging formation.

  • PDF

졸-겔법에 의한 CdS 분산$SiO_2$ Glass 박막의 비선형광학특성

  • 문종수;강종봉;김경문
    • 한국세라믹학회지
    • /
    • 제33권12호
    • /
    • pp.1353-1364
    • /
    • 1996
  • Recently semiconductor doped glasses have attracted attention as nonlinear optical materials because of their large third order nonlinear optical properties. The transparent and homogeneous CdS-doped SiO2 glass thin films were obtained by the dip=coating process of the sol-gel method. Thin films were consisted of glasses containing CdS microcrystallites which were formed by dissolved Cd2+ and S2- ions in a SiO2 matrix solutions. A subsequent thermal treatment of this samples led the formation of colloidal agglomerates and finally of microcrystallites. The size of CdS microcrystallites was about 4 to 15 nm after thermal treatments at various heating conditions. From the optical absorption spectra of the CdS-doped SiO2 glass films it was found that the absorption edge was blue-shifted compared with that of the bulk CdS crystal(~2, 4 eV) and that the amount of energy shift was inversely proportional to the crystal size. And the band gap energy increased with the decrease in crystallite size indicating that the quantum size effects occured.

  • PDF

초임계 건조에 의한 실리카 에어로겔의 저압 합성 (Low Pressure Synthesis of Silica Aerogels by Supercritical Drying)

  • 김동준;현상훈
    • 한국세라믹학회지
    • /
    • 제33권5호
    • /
    • pp.485-494
    • /
    • 1996
  • Silica Aerogels with the density and porosity of 0.1g/cm3 and 96% were synthesized by two different supercri-tical drying processes (i.e additional solvent and intial pressure methods) Isoptopanol was chosen as sol-gel and supercritical drying solvents in order to synthesize aerogels at the lower temperature and pressure because the critical values of isopropanol are lower than those of methanol and ethanol commonly used. The P-V-T relationship of isopropanol was experimentally described for optimizing supercritical drying conditions such as the amount of extra solvent and supercritical drying temperature and pressure. In the addional solvent method monolithic and transparent aerogels were obtained by supercritical drying at 25$0^{\circ}C$ and 900 psing after 40% of the reactor volume was filled with isopropanol. Crack-free aerogels were synthesized at 25$0^{\circ}C$ and 1100~1200 psig by the initial pressure method with an intial nitrogen gas pressure of 400 psig and the isopropanol amount of 5% of the reactor volume.

  • PDF