• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1140-1147
• /
• 2010

To find the soil plug of steel piles shaped by jet grouting, 4 blocks of cement milk with cube of 1.2m were made. 4 open-ended steel piles on the blocks were rested. The inner end part of 2 the piles was not reinforced. Cement milk 65%(SIG-1) and 100%(RJP-1) were filled into the block and height of 4.2 times of inner the pile diameter respectively. And the other the piles were welded 2 steel ring. The filling of the cement milk was an equal method as before(SIG-2 and RJP-2). Also the strain gauges were installed and the static pile load tests were done at the piles all. As a result, list in great order for effect of soil plug was (1)SIG-1, (2)SIG-2, (3)RJP-1, (4)RJP-2. This is because of strength and filling height of cement milk. And the higher the strength is, the greater the confining coefficient is.

• 한국지반공학회논문집
• /
• 제19권3호
• /
• pp.45-51
• /
• 2003

복합기초의 한 형식인 소일시멘트 말뚝의 거동 특성을 컴퓨터 해석을 통하여 연구하였다. 연직하중을 받는 소일시멘트말뚝의 거동 특성을 ABAQUS라는 상용 프로그램을 사용하여 조사하였으며 해석조건은 지반물성치, 말뚝의 길이, 치환율, 강성비, 하중 조건 등을 달리하여 실시하였다. 해석 결과는 하중의 전이 및 침하특성 뿐만 아니라 효과적인 말뚝길이와 말뚝 및 지반의 하중 분배에 관하여서도 유용하게 쓰일 수 있음이 판명되었다. 또한 복합기초를 설계할 때 강성비, 치환율이 설계에 가장 큰 영향을 미치는 인자로 나타났다.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.155-164
• /
• 2020

In recent years, the stability, safety and comfort of trains has received increased attention. The mechanical characteristics and differential settlement of the foundation are the main problems studied in high-speed railway research. The mechanical characteristics and differential settlement of the foundation are greatly affected by the ground treatment. Additionally, the effects of train load and earthquakes have a great impact. The dynamic action of the train will increase the vibration acceleration of the foundation and increase the cumulative deformation, and the earthquake action will affect the stability of the substructure. Earthquakes have an important practical significance for the dynamic analysis of the railway operation stage; therefore, considering the impact of earthquakes on the railway substructure stability has engineering significance. In this paper, finite element model of the CFG (Cement Fly-ash Gravel) pile + cement-soil compacted pile about composite foundation is established, and manual numerical incentive method is selected as the simulation principle. The mechanical characteristics and differential settlement of CFG pile + cement-soil compacted pile about composite foundation under train load are studied. The results show: under the train load, the neutral point of the side friction about CFG pile is located at nearly 7/8 of the pile length; the vertical dynamic stress-time history curves of the cement-soil compacted pile, CFG pile and soil between piles are all regular serrated shape, the vertical dynamic stress of CFG pile changes greatly, but the vertical dynamic stress of cement-soil compacted pile and soil between piles does not change much; the vertical displacement of CFG pile, cement-soil compacted pile and soil between piles change very little.

• Geomechanics and Engineering
• /
• 제23권6호
• /
• pp.513-521
• /
• 2020

In this paper, due to the need for cutting cement-soil group pile composite foundation under the 7-story masonry structure of Zhenghe District and the shield tunnel of Zhengzhou Metro Line 5, a field test was conducted to directly cut cement-soil single pile composite foundation with diameter Ф=500 mm. Research results showed that the load transfer mechanism of composite foundation was not changed before and after shield tunnel cut the pile, and pile body and the soil between piles was still responsible for overburden load. The construction disturbance of shield cutting pile is a complicated mechanical process. The load carried by the original pile body was affected by the disturbance effect of pile cutting construction. Also, the fraction of the load carried by the original pile body was transferred to the soil between the piles and therefore, the bearing capacity of composite foundation was not decreased. Only the fractions of the load carried by pile and the soil between piles were distributed. On-site monitoring results showed that the settlement of pressure-bearing plates produced during shield cutting stage accounted for about 7% of total settlement. After the completion of pile cutting, the settlements of bearing plates generated by shield machine during residual pile composite foundation stage and shield machine tail were far away from residual pile composite foundation stage which accounted for about 15% and 74% of total settlement, respectively. In order to reduce the impact of shield cutting pile construction on the settlement of upper composite foundation, it was recommended to take measures such as optimization of shield construction parameters, radial grouting reinforcement and "clay shock" grouting within the disturbance range of shield cutting pile construction. Before pile cutting, the pile-soil stress ratio n of composite foundation was 2.437. After the shield cut pile is completed, the soil around the lining structure is gradually consolidated and reshaped, and residual pile composite foundation reaches a new state of force balance. This was because the condensation of grouting layer could increase the resistance of remaining pile end and friction resistance of the side of the pile.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.883-887
• /
• 2009

In this study, a new soil retaining system was proposed by soil cement mixing method. The new soil retaining system is based on deep cement mixing method by large diameter reinforcing blocks (piles). Large diameter reinforcing blocks (usually $\varnothing$300-500 mm) have the advantage to make reinforcements over a relatively short depth and thus reduce the amount of reinforcement necessary. A field case has been reviewed for actual application of the soil retaining system at a downtown site. Research was conducted to evaluate the behavior of the installed soil retaining wall, with reinforcing blocks (400 mm in diameter and 4 m in length) placed into a 10 m excavation wall at a $20^{\circ}$ angle. As a result, the potential for applying this method to the downtown excavation site was confirmed.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.109-120
• /
• 1994

해안지역에서 토류구조물을 축조하는 동안에 직면하게 되는 문제점중의 하나는 연약점토지반의 안정화 대책이다. 본 연구는 성토제체 축조시 연약점토지반의 안정화를 위하여 시멘트 개량 말뚝으로 보강된 연약지반의 거동효과를 구명하고자 원심모형실험을 수행한 것으로 서로 다른 조건에 대해서 단계 하중하에서 시간에 따른 보강지반과 비보강지반의 침하와 융기거동을 고찰하였다. 실헙결과 지반의 수직침하감수 제방에 인접한 지표면의 융기감소는 개량말뚝의 강도, 점토의 함수비 그리고 특히 개량면적비에 크게 영향을 받는 것으로나타났다.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.97-107
• /
• 2024

The accurate prediction of grouting upward diffusion height is crucial for estimating the bearing capacity of tip-grouted piles. Borehole construction during the installation of bored piles induces soil unloading, resulting in both radial stress loss in the surrounding soil and an impact on grouting fluid diffusion. In this study, a modified model is developed for predicting grout diffusion height. This model incorporates the classical rheological equation of power-law cement grout and the cavity reverse expansion model to account for different degrees of unloading. A series of single-pile tip grouting and static load tests are conducted with varying initial grouting pressures. The test results demonstrate a significant effect of vertical grout diffusion on improving pile lateral friction resistance and bearing capacity. Increasing the grouting pressure leads to an increase in the vertical height of the grout. A comparison between the predicted values using the proposed model and the actual measured results reveals a model error ranging from -12.3% to 8.0%. Parametric analysis shows that grout diffusion height increases with an increase in the degree of unloading, with a more pronounced effect observed at higher grouting pressures. Two case studies are presented to verify the applicability of the proposed model. Field measurements of grout diffusion height correspond to unloading ratios of 0.68 and 0.71, respectively, as predicted by the model. Neglecting the unloading effect would result in a conservative estimate.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.510-517
• /
• 2012

This study evaluated the recycling potential of in-site waste soil as pile back filling material (PBFM). We performed experiments to check workability, segregation resistance, bond strength, direct shear stress test, and dynamic load test using in-site waste soil in coastal areas. We found that PBFM showed better performance than general cement paste in terms of workability, segregation resistance, and bond strength. On the other hand, the structural performance of PBFM was slightly lower than that of general cement paste due to the skin friction force of pile by Pile Driving Analyzer and direct shear stress. However, because this type of performance degradation in terms of structure can be improved through the use of piles with larger diameter or by changing the type of pile, considering the economics and environment, we considered that recycling of PBFM has sufficient value.

• 한국지반공학회논문집
• /
• 제33권1호
• /
• pp.5-15
• /
• 2017

주면마찰력은 매입말뚝에서 가장 큰 영향 요소이다. 특히 시멘트풀과 지반 사이의 인터페이스 거동에 있어 가장 큰 영향을 미친다. 본 연구에서는 시멘트 풀 영향을 고려하여 단독말뚝에 대한 현장축소모형말뚝 재하시험을 수행하였다. 시험말뚝은 상사비를 고려하여 길이 1.3m 지름 0.067m로 선정하였으며, 굴착공경은 150, 125, 90, 86, 74mm, 시멘트풀 물/시멘트비는 90, 70, 60%로 급속재하시험을 수행하였다. 분석 결과 굴착공경이 증가할수록 지지력 증가를 확인하였다. 또한, 물/시멘트비가 부배합일수록 지지력이 증가하는 것을 확인하였다. 상사비를 고려한 축소모형시험결과, 굴착 공경은 말뚝지름(0.508mm 기준)보다 대략 0.1~0.4D(50~200mm) 크게 시공하는 것이 적합하다. 그리고 시멘트풀 물/시멘트비는 본 연구 결과와 품질관리 등을 고려하였을 때, 70% 정도가 적절하다.

• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.29-47
• /
• 2013

본 연구에서는 항만구조물 기초지반에 소일-시멘트 파일을 이용한 말뚝식 지반개량을 적용한 90개 단면에 대해 안정검토를 수행하였고, 수치해석을 포함한 모든 항목에서 안정한 단면별 최소치환율을 결정하였으며, 원심모형실험을 통해 수치해석 결과의 신뢰성을 검증하였다. 연구결과, 기초지반이 매우 연약($s_u$ =15kPa이하)한 경우에는 말뚝식 지반개량이 부적합하고, 항만구조물의 말뚝식 지반개량에는 기초지반과 개량체의 강성비(n)가 최대 50~75이하이고 개량체 강도가 2~3MPa인 소일-시멘트 파일공법이 가장 적합하며, 최소치환율 지배인자가 허용수평변위이므로 말뚝식 지반개량을 설계할 때는 반드시 수평변위를 검토해야 하는 것으로 나타났다.