• 제목/요약/키워드: Soil evaporation

검색결과 172건 처리시간 0.024초

점적관개(點滴灌漑)에서 토양수분 이동 현상에 대한 2차원 모델 개발 연구 (2-Dimensional Moisture Migration Modeling in Drip-Irrigated Root Zone)

  • 노희명;김승현
    • 한국토양비료학회지
    • /
    • 제30권4호
    • /
    • pp.314-327
    • /
    • 1997
  • 점적 관개시 근권에서의 토양 수분 이동 현상을 2차원 원통 좌표를 이용하여 모델링 하였다. 엽면 증산, 다양한 형태의 지면 증발, 관개율의 증가로 인한 지면에서의 물 고임 현상등을 고려하였다. 모델은 유한 차분법을 이용한 수치해로 풀었다. 여러가지 비교의 결과로부터 본 연구에서 개발된 모델은 근권에서의 토양 수분 이동 현상을 잘 묘사한다고 볼 수 있었다. 모델의 민감도 분석을 통해서 몇가지 유익한 사실을 발견하였다. 토양 수분이 연직 방향으로 이동하는 속도가 더 큰 것으로 보아 자동 관개용 토양 수분 측정 센서를 설치할 경우, 관개점의 연직하방이 좋은 측점임을 알 수 있었다. 습윤대의 형태가 단지(pot) 모양으로 되는 것은 지면 증발로 인한것임을 알 수 있었다. 또한, 토양의 포화 수리 전도도가 습윤대의 확산에 큰 영향을 주는 것을 알 수 있었고, 관개 중단 후에도 연직 방향의 확산은 계속됨을 알 수 있었다.

  • PDF

50mm 깊이 증발(蒸發) 팬을 이용한 한발 평가 모델 설정 (Drought Estimation Model Using a Evaporation Pan with 50 mm Depth)

  • 오영택;오동식;송관철;엄기철;신제성;임정남
    • 한국토양비료학회지
    • /
    • 제29권2호
    • /
    • pp.92-106
    • /
    • 1996
  • 한발 간이 평가에 가상의 초지가 적합하다는 전제하에, 관여 인자를 작물 계수, 토양의 저수능, 토양 수분 상태로 정의되는 한발 개시점으로 제한하여, 토양 수분 회계장부 법으로 한발 전산 모델을 개발하였다. 최대 유효 강우는 토양 저수능 중에 잔여량과 같다고 전제 하였는데, 이 모델은 일정 깊이 개방통에 강우 최대 수용력이 수면 위 여유 공간 만큼인 것과 유사하며 이 통에 저장된 물이 증발하여 미리 규정한 수위 이하로 되면 한발로 취급함과 같다. 이 모델은 한발 평가를 위하여 전제한 가상 초지의 수분 부족을 추적하는데, 물 요구량, 한발 강도, 한발에 의한 수량 감소 지수를 계산할 수 있다. 선정된 인자의 영향 강도 비율을 이 모델에 의한 년간 필요 개량을 고려하여 계산하면, 작물계수 100, 토양 저수능 21, 한발개시점 16이었다. 이 모델에서 선발된 인자의 최적값은 작물 계수는 대형 증발계 증발량의 0.85배였고, 토양 저수능은 사양토 양토 식양토와 식토에서 실측 결과의 평균은 50mm 였으며, 한발 개시점은 저수능의 65% 였다.

  • PDF

토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I) (A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation)

  • 김철회;고재군
    • 한국농공학회지
    • /
    • 제19권1호
    • /
    • pp.4279-4295
    • /
    • 1977
  • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

  • PDF

초연약 준설토의 증발 및 건조특성 분석 (Evaporation and Desiccation of Soft Dredged Clay)

  • 정하익;오인규;지성현;이승원;이영남;김수삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.217-222
    • /
    • 2000
  • An understanding of the behaviour of soft clay soils is important in a large number of civil engineering applications, including dredging operations, land reclamation and slurry management such as disposal and storage. Although the details of the behaviour depend on parameters such as the soil mineralogy, the pore water chemistry, the organic content and the microbiology, there are general features that are typical in many cases. The purpose of this paper is to present and discuss some of evaporation and desiccation observed in laboratory experiments under controlled conditions. Desiccation of dredged material is basically removal of water by evaporation which is controlled by weather and material type, etc. This study shows that (1) solar radiation, (2) wind velocity, (3) material depth, (4) trench depth are important factors in desiccation of dredged ultra soft clay.

  • PDF

동결기 자유수면 지하수의 모관상승량을 고려한 DAWAST 모형 (DAWAST Model Considering the Phreatic Evaporation in the Frozen Region)

  • 김태철;박철동
    • 한국농공학회지
    • /
    • 제43권2호
    • /
    • pp.78-84
    • /
    • 2001
  • The daily streamflow in the Yaluhe watershed located in the north-eastern part of China was simulated by DAWAST model and the water balance parameters of the model were calibrated by simplex method. Model verification tests were carried out. The range of root mean square error was 0.34∼1.50mm, that of percent error in volume was -16.9∼-62.0% and that of correlation coefficient was 0.727∼0.920. DAWAST model was revised to consider the phreatic evaporation from the ground water in the frozen soil by adjusting soil moisture content in the unsaturated layer at the end of the melting season. The results of estimation of the daily streamflow by the revised model were statistically improved, that is, the range of root mean square error was 0.31∼1.49mm, that of percent error in volume was -11.7∼-12.1%, and that of correlation coefficient was 0.810∼0.932. The accuracy of DAWAST model was improved and the applicability of DAWAST model was expanded to the frozen region.

  • PDF

밭에의 토양수분 소비기구에 관한 연구 (A Study on Mechanism of Consumed Water in tne Farm Land)

  • 류능환;민병섭
    • 한국농공학회지
    • /
    • 제16권4호
    • /
    • pp.3555-3571
    • /
    • 1974
  • This experiment of which aim contribute to plan irrigation system so as to increase forage crop yields, was conducted to estimate evapotranspiration amount of forage crops and to find out system of consumed water in a pasture-ground. The results obtained by this study are as follows: 1. The general weather conditions which, were closely related to the evapotrannpiration of forage crops were nearly same as those of the average year with the exception that temperature of May and June were slightly low. 2. According to the investigation of potential evapotranspirations (P.E) or forage crops and its changes during growing periods, changes of tenday P.E. were high significant according to the harvesting period. P.E of Alfalfa of which yield was the largest was the biggest. Althrough the correlations between P.E. and meteorological factors were irregular oming to three-time harvesting, correlation between ten-day evapotraspiration amount and copper plated pan evaporation or solar radiation was high positive significant. 4. Predicting formulas of P.E. were led by weather factors, and also relatione between P.E. and weather factors were showed as figure. from the these formulas, P.E. may be calculated by weather factors. 5. Predicting formulas of P.E. were led by mean temperature and copper plated pan evaporation, and by mean temperature and solar radiation. As computed values and measured values showed in figure, these formulas were high signiflent. 6. In the total consumed soil water duration of 10 days which, was non-rain period from 12th to 21th of August, Alfalfa was the largest 48.1mm, second, Orchard grass 40.1mm and Fescue 37.6mm, and Ladino clover was the smallest 37.1mm, also, order of each forage crop yield amound. was same to the abov. Order of soil moisture extraction rate of soil layer of all the for forage crops dulation of ten-day was soil layer 1 which was largest, soil layer 2, 3, and 4 Reviewing the the first five-day and the second five day, in the first five-day, order of that of all the forage crops was same to the above, but in the second five-day, that of soil layer 2 or 3 was more than the of soil layer 1.

  • PDF

밭작물소비수량에 관한 기초적 연구(II)-마늘 및 오이- (Basic Studies on the Consumptive Use of Water Required for Dry Field Crops (2) -Garlic and Cucumber-)

  • 김철기;김진한;정하우;최홍규;권영헌
    • 한국농공학회지
    • /
    • 제31권3호
    • /
    • pp.41-56
    • /
    • 1989
  • The purpose of this study is to find out the basic data for irrigation plans of garlic and cucumber during the growing period, such as total amount of evapotranspiration, coefficients of evapotranspiration at each growth stage, the peak stage of evapotranspiration and the maximum evapotranspiraton, optimum irrigation point, total readily available moisture, and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soil texture for split plot, and three levels ; irrigation points with pP 1.7-2.1, pP 2.2-2.5, pP 2.6-2.8, for garlic and those with pP 1.9, pF 2.3, pP 2.7, for cucumber, soil textures of silty clay, sandy loam and sandy soil for both garlic and cucumber, with two replications. The results obtained are summarized as follows 1.There was the highest significant correlation between the avapotranspiration of garlic and cucumber and the pan evaporation, beyond all other meteorological factors considered, as mentioned in the previous paper. Therefore, the pan evaporation is enough to be used as a meteorological index measuring the quantity of evapotranspiration. 2.1/10 probability values of maximum total pan evaporation during growing period for garlic and cucumber were shown as 495.8mm and 406.8mm, respectively, and those of maximum ten day pan evaporation for garlic and cucumber, 63.8mm and 69.7mm, respectively. 3.The time that annual maximum of ten day pan evaporation can be occurred, exists at any stage between the middle of May and the late of June(harvest period) for garlic, and at any stage of growing period for cucumber. 4.The magnitude of evapotranspiration and of its coefficient for garlic and cucumber was occurred in the order of pF 1.7-2.1>pF 2.2-2.5>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF2.7 respectively in aspect of irrigation point and of sandy loam>silty clay>sandy soil in aspect of soil texture for both garlic and cucumber. 5.The magnitude of leaf area index was shown in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 for garlic and of pF 1.9>pF 2.3>pF 2.7 for cucumber in aspect of irrigation point, and of sandy loam>sandy soil>silty clay in aspect of soil texture for both garlic and cucumber. 6.1/10 probability value of evapotranspiration and its coefficient during the growing period for garlic were shown as 391.7mm and 0.79 respectively, while those of cucumber, 423.lmm and 1.04 respectively. 7.The time the maximum evapotranspiration of garlic can be occurred is at the date of thirtieth before harvest period and the time for cucumber is presumed to be at the date of sixtieth to seventieth after transplanting, At that time, 1/10 probability value of ten day evapotranspiration and its coefficient for garlic is presumed to be 65.lmm and 1.02 respectively, while those of cucumber, 94.8mm and 1.36 respectively. 8.In aspect of irrigation point, the weight of raw garlic and cucumber were increased in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF 2.7 respectively. Therefore, optimum irrigation point for garlic and cucumber is presumed to be pF 2.2-2.5 and pF 1.9 respectively, when the significance of yield between the different irrigation treatments is considered. 9.Except the mulching period of garlic that soil moisture extraction patterns were about the same, those of garlic and cucumber have shown that maximum extraction rate exists at 7cm deep layer at the beginning stage after removing mulching for garlic and at the beginning stage of growth for cucumber and that extraction rates of 21cm to 35cm deep layer are increased as getting closer to the late stage of growth. 10.Total readily available moisture of garlic in silty clay, sandy loam, sandy soil become to be 18.71-24.96mm, 19.08-25.43mm, 10.35- 13.80mm respctively on the basis of the optimum irrigation point with pF 2.2-2.5, while that of cucumber, 11.8lmm, 12.03mm, 6.39mm respectively on the basis of the optimum irrigation point with pF 1.9. 11.The intervals of irrigation date of garlic and cucumber at the growth stage of maximum consumptive use become to be about three and a half days and one and a half days respectively, on the basis of each optimum irrgation point.

  • PDF

마이크로파 가열에 의한 토양 유기오염물질 탈착특성 (Desorption Characteristics of Volatile Organics Compounds in Soil by Microwave Heating)

  • 문경환;김덕찬
    • 환경위생공학
    • /
    • 제11권2호
    • /
    • pp.65-73
    • /
    • 1996
  • The objective of this study is to investigate the removal efficiency of volitile organic compounds in soil, and the mechanism of desorption by bench scale microwave heating, Silt soil used for experiment and was impregnated with toluene, tetrachloroethylene, o-xylene and p-dichlorobenzene and the microwave treatment was conducted in a modified domestic microwave oven : 2450MHz, 700W. According to the results of the research the removal efficiency was improved with increasing water contents and the soil temperature appeared to plateau period extending to 2-3minutes corresponds to the temperature a which steam distillation was expected. The value of removal rate constant (k) were calculated on dry and moisty silt soil, respectively, which showed linear with increasing microwave heating time. Therefore, addition of a certain amount of water to the contaminated soil can efficiently enhance the ability of the soil to absorb microwave energy and promote the evaporation of the volitile contaminants.

  • PDF

마이크로파에 의한 휘발성 유기토양오염물질 제거에 관한 연구 (Microwave Remediation of Soils Contaminated by Volatile Organic Chemicals)

  • 문경환;김우현;이병철;김덕찬
    • 한국환경보건학회지
    • /
    • 제22권3호
    • /
    • pp.116-122
    • /
    • 1996
  • This study has been focused on the applicability of microwave treatment of soil contaminated by volitile organic chemicals. Substrates studied were sand and sandy soil. These substrates were impregnated with toluene, tetrachloroethylene, o-xylene and p-dichlorobenzene. The microwave treatment was conducted in a modified domestic microwave oven: 2450 MHz, 700 W. The sandy soil temperature added water went up rapidly to about 130$\circ$C for 4 minutes. And then, the temperature appeared to plateau out. A series of tests were performed to depict the effectiveness of microwave treatment technique to organic contaminants from soils. Removal efficiencies in sandy soil and sand were increased with increasing water content and exposure time. Microwave radiation penetrates the soil and heats water throughout the matrix. Therefore, addition of a certain amount of water to the contaminated soil can efficiently enhance the ability of the soil to absorb microwave energy and promote the evaporation of the volitile contaminants. And the vapour pressure of impregnated organic contaminants becomes lower. the removal efficiency becomes poor.

  • PDF