• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.72-88
• /
• 2006

The optimal environmental ranges of the establishment phase for the distribution of Zizania latifolia and Typha angustifolia was determined to develop a set of basic data and criteria of planting substrate for the restoration, conservation and management of wetlands. The study was carried at 17 wetlands in the Kyunggi-do and Gyeongsangnam-do region where inland wetlands place intensively in June, 2005. Total 127 quadrats were sets in growing areas of Zizania latifolia and Typha angustifolia. $NO_3-N$, K, Ca, Mg and Na in the water variables and soil texture, LOI (loss on ignition), soil pH and soil conductivity in the soil variables were analyzed. The optimal range of water depth for the distribution of Zizania latifolia was -5~39cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.1~5.9ppm, Ca content of water 0.5~44.9ppm, Mg content of water was 1.2~11.9ppm, Na content of water 3.4~29.9ppm, water conductivity was 48~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Zizania latifolia was 1.7~11.9%, soil conductivity was 25.5~149.9${\mu}S$/cm, respectively. The optimal range of water depth for the distribution of Typha angustifolia was -20~24cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.2~2.9ppm, Ca content of water 0.6~19.9ppm, Mg content of water was 0.2~5.9ppm, Na content of water 3.5~19.9ppm, water conductivity was 96~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Typha angustifolia was 2.4~15.9%, soil conductivity was 17.6~149.9${\mu}S$/cm, respectively. The optimal soil texture were loam, silt loam and sandy loam in both species. The lower water depth (-20~40cm) is appropriate to increase biodiversity in both species dominated community and it is better to maintain water depth of 40~100cm for water purification. Both species appear frequently in the soil with high silt content.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.39-48
• /
• 2004

The purpose of this paper was to confirm the application of the equation of the soil-water characteristic curve on an unsaturated soil. To this ends, a series of suction test was conducted on the selected 4 kinds of soil which is located in Korea, using the modified pressure extractor apparatus. And it was carried out to analyze the experimental parameters which can describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that the matric suction was varied according to the grain size distribution, amount of fine grain particle and void ratio. Also it was found that the residual volumetric water content was decreased with the void ratio, but the index related air entry value, the soil parameter related water content and the parameter with residual water content were increased with the void ratio. And the application of equation of the soil-water characteristic curve was confirmed for the various conditions and the various state by the comparison between the volumetric water content measured by the experiment and the predicted values.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.743-750
• /
• 2002

Unsaturated soil has a possibility to induce a negative pore water pressure. Until now, saturated soil is mainly focused on the research of soil mechanics. Recently, soil mechanics is researched on two major parts such as saturated and unsaturated soil mechanics. Negative pore water pressure has a non-linear relationship with the water content changes. Soil-water characteristic curves of soil in Korea are not determined. There is no proper characteristic value such as air-entry value and residual water content. In this study, the characteristic curves of reclaimed soil, sand, and weathered granite soil were determined by laboratory tests. Air-entry value and residual water content were determined by fitting methods. Soil-water characteristic curves were estimated based on the particle-size distribution and compared with the laboratory test results. The results of soil-water characteristic curves estimation indicated that Fredlund and Wilson's model is excellent for sand and weathered granite soil. Arya and Paris's model is excellent for reclaimed soil.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2021

Air-water interfacial area is of great importance for the analysis of contaminant mass transfer processes occurring in the soil systems. Capillary bundle model has been proposed to estimate the specific air-water interfacial areas in unsaturated soils. In this study, the measured air-water interfacial areas of a soil (loam) using the gaseous interfacial tracer technique were compared to those from capillary bundle model. The measured values converged to the specific solid surface area (7.6×104 ㎠/㎤) of the soil. However, the simulated air-water interfacial areas based on the capillary bundle model deviated significantly from those measured. The simulated values were substantially over-estimated at low end of the water content range, whereas the model under-estimated the air-water interfacial area for the most of the water content range. This under-estimation is considered to be caused by the nature of the capillary bundle model that replaces the soil pores with a bundle of glass capillaries and thus no surface roughness at the inner surface of the capillaries is taken into account for the estimation of the air-water interfacial area with the capillary bundle model. Subsequently, appropriate correction is necessary for the capillary bundle model to estimate the air-water interfacial area in soils. Since the soil-moisture release curve data is the basis of the capillary bundle model, the model can be of use due to its simplicity, while the gaseous tracer technique requires complicated experimental equipment followed by moment analysis of the breakthrough curves. The size distribution profile of the pores filled with gas estimated by the water retention curve was found to be similar to that of particle size at different size range. The shifted distribution of gas-filled pores toward smaller size side compared to the particle size distribution was also found.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.119-128
• /
• 1988

The purpose of this research is to quantify the effects of water content(0.3~1.255%) and temperature ($4{\sim}40^{\circ}C$) on the equilibrium distribution of toxic organic pollutant in unsaturated soil. The priority pollutants, Dichloromethane and 1, 1, 1-Trichloroethane were selected as toxic organic pollutants and the Korean decomposed granite soil as the experimental soil media. Two models were developed on the basis of shapes of soil water distribution in unsaturated soil and compared; complete surface coating(model I) vs. spot clustering (model II). From the experiment, a large decrease in the values of effective partition coefficient ($K_{eff}$) was observed as the water content increased. As the temperature increased, the $K_{eff}$ values decreased, and this effect was magnified at lower water contents. The values of $K_{eff}$ were correlated better with the estimated values using model II. Thus it was experimentally proved that the soil water tends to enclose the soil grain partly at lower water contents.

• Clean Technology
• /
• v.8 no.2
• /
• pp.67-76
• /
• 2002

Dewatered sludge of 400,000t/y from water treatment plants in Korea is being disposed through landfill and ocean dumping. However, the disposal is posing more and more serious environmental problems at the same time not only because of landfill site shortage in municipal suburbs, but because of the concern it will contaminate the oceans. In this study, the research on utilizing the sludge dried by flash dryer as covering soil in the landfill sites was carried out to solve these problems on environmental affinity. Both dewatered and dried sludge were exposed to the natural condition and observed according to the atmospheric changes. An experiment of soil engineering characteristics of the dried sludge and tests on mixed sludge(silty sandy soil : dried sludge = 10:90 ~ 30:70) such as particle size distribution, liquid and plastic limit, moisture content, specific gravity and compaction test were carried out. According to the compaction test, the compaction was confirmed as the optimum water content ratio was observed in the condition of SM-silty sand of particle size distribution, NP of liquid and plastic limit, 101.4% of moisture content, 2.04~2.12 of specific gravity. The results showed that dried sludges mixed with at least 30% of natural soil could be used as daily covering soil in the landfill sites.

• Geomechanics and Engineering
• /
• v.31 no.5
• /
• pp.519-527
• /
• 2022

Shear failure in soil is the primary cause of most geotechnical structure failures or instability. Soil water content is a significant factor affecting soil shear strength. In this study, the shear strength of samples with different water contents was tested. The shear strength, cohesion, and internal friction angle decreased with increasing water content. Based on the variation of cohesion and internal friction angle, the water content zone was divided into a high-water content zone and low-water content zone with a threshold water content of 15.05%. Cohesion and internal friction angle have a good linear relationship with water content in both zones. Environmental Scanning Electron Microscopy (ESEM) test presented that the aggregates size of the compacted loess gradually increases with increasing water content. Meanwhile, the clay in the compacted loess forms a matric that envelops around the surface of the aggregates and fills the inter-aggregates pores. A quantitative analysis of bound water and free water under different water contents using a nuclear magnetic resonance (NMR) test was carried out. The threshold water content between bound water and free water was slightly below the plastic limit, which is consistent with the results of shear strength parameters. Combined with the T2 distributions obtained by NMR, one can define a T2 relaxation time of 1.58 ms as the boundary point for bound water distribution without free water. Finally, the effects of bound water and free water on shear strength parameters were analyzed using linear regression analysis.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.1
• /
• pp.63-73
• /
• 2003

The settling of the dredged soil may vary with mineral composition, grain size distribution, initial water content and salt concentration of suspension of the site. A series of settling column test was performed to investigate the behaviour of solid suspension material from dredging and reclamation. Settling mode was divided into four types from the observation of interface and settling curves of clay minerals and marine clay samples, and the relationship charts of salt concentration and the initial water content were established to use in the dredging operation with any salt concentration. The critical initial water content which was defined as a threshold of zone settling and the consolidation settling was varied with salt concentration of water and was proportional to the plasticity of soil in sea water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.1-4
• /
• 1974

The application of the Distribution Law to soil-pesticide systems yielded the following empirical implications : 1) The amount of the pesticide adsorbed by a soil is negatively proportional to the soil water content. 2) At a given soil water content the amount adsorbed is proportional to the Kd of the soil. 3) The effect of soil water content on the amount of the pesticide adsorbed diminishes with increasing magnitude of the Kd.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.336-344
• /
• 2017

The soil water characteristics curve (SWCC) represents the relation between soil water potential and soil water content. The shape and range of SWCC according to the relation could vary depending on soil characteristics. The objective of the study was to estimate SWCC depending on soil types and layers and to analyze the trend among them. To accomplish this goal, the unsaturated three soils were considered: silty clay loam, loam, and sandy loam soils. Weighable lysimeters were used for exactly measuring soil water content and soil water potential. Two fitting models, van Genuchten and Campbell, were applied. Two models entirely fitted well the measured SWCC, indicating low RMSE and high $R^2$ values. However, the large difference between the measured and the estimated was found at the 30 cm layer of the silty clay loam soil, and the gap was wider as soil water potential increased. In addition, the non-linear decrease of soil water content according to the increase of soil water potential tended to be more distinct in the sandy loam soil and at the 10 cm layer than in the silty clay loam soil and at the lower layers. These might be seen due to the various factors such as not only pore size distribution, but also cracks by high clay content and plow pan layers by compaction. This study clearly showed difficulty in the estimation of SWCC by such kind of factors.