• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.45-56
• /
• 2017

Coal power plants produce electricity for the nation's power grid, but they also produce more hazardous air emissions than any other industrial pollution sources. The quantity is staggering, over 386,000 tons of 84 separate hazardous air pollutants spew from over 400 plants in 46 states. In South Korea also, annual coal ash generation from coal-fired power plants were about 6 million tons in 2015. Pollutants containing particulate matter 10, 2.5 (PM10, PM2.5), heavy metals and dioxins from coal-fired power plant. The emissions threaten the health of people who live near these power plants, as well as those who live hundreds of miles away. These pollutants that have long-term impacts on the environment because they accumulate in soil, water and animals. The present study is to investigate the physical and chemical characteristics of coal-fired power plant fly ash and bottom ash contains particulate matter, whose particulate sizes are lower than $PM_{10}$ and $PM_{2.5}$ and heavy metals. There are wide commercial technologies were available for monitoring the PM 2.5 and ultra-fine particles, among those carbonation technology is a good tool for stabilizing the alkaline waste materials. We collected the coal ash samples from different coal power plants and the chemical composition of coal fly ash was characterized by XRF. In the present laboratory research approach reveals that potential application of carbonation technology for particulate matter $PM_{10}$, $PM_{2.5}$ and stabilization of heavy metals. The significance of this emerging carbonation technology was improving the chemical and physical properties of fly ash and bottom ash samples can facilitate wide re use in construction applications.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.21-27
• /
• 2012

Estimating the thermal conductivity of clayey soils is important for enhancing the performance of geoengineering structures in cold regions and clay barriers for nuclear waste repositories, but specimen disturbance, saturation, and heat boundary conditions of the test apparatus hinder reliable measurements of the thermal conductivity of saturated clayey soils. This paper presents the results of an experimental study carried out using modified consolidation tests with the needle probe method to measure thermal conductivity. Experimental consolidation tests with saturated kaolinite were performed to investigate the effect of effective stress and dry density on thermal conductivity for saturated kaolinite. In addition, thermal conductivity of soil particles were thoroughly investigated and experimental results were used to evaluate the accuracy of the models to predict thermal conductivity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.97-105
• /
• 1994

To investigate the characteristic and the cause of the yellow water zones in the estuary of keum River, physico-chemical measurement and analyses were made on seawater samples collected from 18 stations in May, July, august, October in 1992, and February in 1993 respectively. The yellow water zones were recorded as grade 9 on the forel water color meter and appeared consistently at the stations 1, 2, 3, 4, 5, 7, 8, 9, 13, 14, 15 and 17 through out the year. The organically polluted matter gradually increased in the study area. The nutrient concentrations of inner waters of water zones were higher than that of the surrounding waters and were over red tide criteria levels. But abnormal aggregation of phytoplanktons could not occur because of lack of light and high current velocity. In Conclusion, this yellowish colored water zone was caused not by abnormal aggregation of phytoplanktons but by inorganic matters such as sand or soil particles, $85\%$ of which consisted of suspended solids.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.29-62
• /
• 2001

Based on the results from investigation of behaviour of pulverized fly ashes (PFA) at laboratory and field, the way how to reduce the environmental impacts to geotechnical practices Is considered and described. In order to reduce discharged industrial by-products, it should primarily be emphasized that an effort are made as much as possible not to put into homing. Secondarily, an effort must be made to increase amount of utilization to geotechnical engineering practices. In addition, from an environmental point of view, we should challenge to create innovative materials which are eligible for controlling other wastes and remedying contamination m soils by using industrial byproducts which belong to wastes This Is a new concept in which the polluting materials can be eliminated by making use of wastes. Based on the above-stated concept, the previous and possible utilization of PFA is classified into: (1 ) reclamation, embankment or backfill material, (2) light weight geo-material, (8) soil stabilization/improvement, and (4) environmental material. The reason why PFA, in particular, slurry PFA has been used and will possibly be used more widely is due to the fact that PFA has the advantages : (i) low specific gravity leading to a light weight geomaterial, (ii) high pozzolanic activity enhancing strength, especially due to cement addition, and (iii) spherical shape of particles producing isotropy and then pumpability. As well as the concept of reducing geo-environmental impacts, the present text mainly describes the successful results at laboratory and field which have been obtained by the authors. The most important issue hi application of byproducts including PFA for geotechnical practices is to prevent leakage of polluted substances from sedimentary deposits, ground and earth structures. As one of possible techniques far achieving this purpose, a method of washing off the polluted substances by hot water is described.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.261-269
• /
• 2002

The objectives of this paper are to study the use of geotextile tribes for dewatering high water content sludges and sediments and to evaluate their feasibility and affecting fsctors. To accomplish these objectives, pressure filtration tests were conducted on woven geotextile (Geotex$\circledR$ 46T and 1212T) fir high water content materials with a modified experimental apparatus. Test results indicate that 1) the filter cake formed on the inside of the geotextile tube is the major contributor to the retention of fine particles, but also causes a decrease in permeability, 2) controlling the formation of the filter cake and thus achieving a balance between soil retention and permeability is vital to a successful project, and 3) geotextiles, sludge properties, and filtration pressures have some effects on the dewatering efficiency and dewatering rate.

• Journal of Environmental Health Sciences
• /
• v.31 no.4 s.85
• /
• pp.301-308
• /
• 2005

The purpose of this study was to characterize mass concentration of $PM_{10}\;to,\;PM_{2.5}$ and metallic composition using Minivol Portable Sampler from May 2003 to May 2004 in metropolitan city, Seoul. Annual average concentration of $PM_{10}$ were $57.67({\pm}28.20)\;{\mu}g/m^3\;and\;PM_{2.5},\;were\;42.06({\pm}20.23)\;{\mu}g/m^3$. The concentration was the highest in winter because persistent thermal inversion and in spring, particulate matter concentration was high because of yellow-sand events. The average $PM_{2.5}/PM_{10}$ ratio was 0.73. This indicated $PM_{2.5}$ fraction played a significant role in air pollution. The atmospheric metallic elements in the $PM_{10},PM_{2.5}$ came different emission sources such as soil, traffic, industry and resuspended particles. The results showed that average $PM_{10}$ composition order as Fe>Zn>Pb>Cu>Mn. The metallic elements Zn and Fe were the largest composition in the $PM_{2.5}$

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.28-38
• /
• 2006

Since the radioactivity of U was discovered by Becquerel in 1896, a number of radiometric dating techniques based on radioactive decay have been developed with the help of precise and accurate instruments. Among them, radiocarbon dating was introduced as the most effective method in archeology in Korea. However, though the radiocarbon methods have contributed greatly to the development of archeology in Korea, it is limited to organics in a matrix of soil and sediment, including organic carbon, charcoal, bone and so on. If there are no organics in some paleolitic sites, other methods are required for dating. Therefore, we introduced OSL (Optically Stimulated Luminescence) dating method in this paper. The method is mainly based on quartz grains or other particles. The aim of this paper is to discuss about sampling method and the limitation of its application in archeology.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.81-91
• /
• 2012

In this study, it is grasped the status of nutrients through an investigation of release characteristics and physicochemical properties of sediments on reservoir. And then the effect of sediments is evaluated on the water quality in reservoir. In the results of physicochemical analysis, the pollution level of midstream is the highest, which shows the traits that the water is more deeper and takes place a deposition consistently. Then, the pollution level of upstream is higher than downstream's because inflow has influence on the upstream directly. The downstream is located near tidal gate so that the soil particles can be moved easily and are difficult to be deposited due to the distribution of seawater by control of tidal gate. Therefore, the downstream is showed the lowest pollution level than the others. Also, the concentration of SOD(Sediment Oxygen Demand) in the upstream which is influenced on the effect of inflow is highest than the others. When it analyzes under anaerobic and aerobic condition to understand the release characteristic of sediment, it shows that the release rate is low or negative under the aerobic condition. Whereas the release rate is usually positive under the unaerobic condition relatively. According to these results, it is necessary to maintain the proper environmental factors of water body for decreasing the release rate of sediment. Because the release rate is changeable under the different condition of water body. Therefore, proper strategies are required for increasing the self-purification of water as well as keeping the aerobic condition of sediment and managing a sediment layer directly to control the inner-pollution by the sediment of reservoir.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.33-41
• /
• 2018

Soil internal erosion is a phenomenon in which fines attached to the solid skeleton are detached by fluid flow, and this continuous fine migration weakens the hydro-mechanical characteristics of the ground structure. This paper proposed governing equations for fine migration in pore spaces and its related scheme for the numerical analysis. Phase diagram for fine particles includes three different states: detached fines in the liquid phase ($c_e$), attached fines in the solid phase (${\sigma}_a$), and pore-clogged fines in the solid phase (${\sigma}_s$). Numerical formulations for finite element method are developed based on the hydraulic governing equations of pore fluid and fine migration. This study proposed a method of estimating model parameters for fine detachment, attachment, and clogging from 1D erosion experiments. And it proposed an analytical formula for hydraulic permeability function considering fine clogging. Numerical analysis of the previous erosion test developed the numerical scheme and verified the adequacy of fine migration models.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.27-45
• /
• 2017

At the upper part of terrace deposits at Jeongdongjin area, there is a structure in which reddish brown and grayish white layers laying horizontally. Previous studies have reported the existence of these structures within the deposits and suggested the theoretical background related to the formation process. However, the analysis of physical properties and chemical composition such as particle size, classification, etc. of the materials constituting the reddish brown and grayish white layers is scarcely done. In this study, the physico - chemical properties of gray - white and reddish brown beds are investigated. The mean grain size of the particles was less than $4{\varphi}$ in both layers and the reddish brown layer was more coarse. The results shows that the sorting of the grayish white layer is better. The chemical composition of both layers shows that the average concentration of $SiO_2$, $Al_2O_3$ and $K_2O$ of the grayish white layer was higher than those of the reddish brown layer. The concentration of $Fe_2O_3$ of reddish brown lyaer was 3 times higher than those of the grayish white layer. The degree of chemical weathering (CIA) is 90 or so in both the reddish brown and grayish white layers, indicating a significant level of chemical weathering. In conclusion, reddish brown layers had been formed by the processes related to the migration of iron and the migration of water that induced aggregation after the formation of sediments (psudo-gleization). In this study area, a vertical layer of grayish white which cuts off horizontal reddish brown and grayish white color was found. The vertical layer or wedge similar to a ice-wedge or columnar structure that in a cold environment, and there is a difference in shape and size. The vertical layer appears to have occurred three or more cycles. The vertical layers begin to form at a certain height within the outcrop and descend downwards, which of course is difficult to see as directing certain times.