• 한국지반공학회지:지반
• /
• 제2권1호
• /
• pp.7-14
• /
• 1986

The structure of the collapsible soils, such as decomposed granite soil and loess, were examined by the odeometer test, SEM & XES analysis and static & cyclic triaxial test, and hove this structure have influences upon the collapsible behaviour under static and cyclic load was investigated. The study results obtained are as follows; 1. The macropores space of decomposed granite soil (rd=1.50g/cm3) and loess (rd=1.43g/cm3) used in this test were well developed, and showed the behaviour of collapsible soil. 2. Collapsible soil has high resistance on the strain under natural moisture content, however, the resistance on the strain was sharply decreased by the absorption and increasing load since its special structure was destructed. 3. Under the static load, the strain of collapsible soil was high by the viscous flow of the cyclic bonds with time lapse, but Infer the cyclic load, the strain of collapsible soil was low since the tinge needed to destruct the bonding force of clay was not enough. 4. The understanding about the cyclic behaviour of collapsible soil may be helpful to predict the elastic & residual strain of the foundations by the earthquake together with the damage by the additional failure.

• Structural Engineering and Mechanics
• /
• 제20권5호
• /
• pp.575-587
• /
• 2005

Using the nonlinear load transfer function for pile side soil and the linear load transfer function for pile end soil, a combined approach of the incremental load transfer matrix method and the approximate differential equation solution method is presented for the nonlinear analysis of interaction between flexible pile group and soil. The proposed method provides an effective approach for the solution of the nonlinear interaction between flexible pile group under rigid platform and surrounding soil. To verify the accuracy of the proposed method, a static load test for a nine-pile group under a rigid platform is carried out. The finite element analysis is also conducted for comparison purposes. It is found that the results from the proposed method match very well with those from the experimental test and are better in comparison with the finite element method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.182-190
• /
• 1994

Mattress foundations using geogrids are often used on soil foundations to increase the supporting capability of a mattress-soil foundation system, in which the mattress foundation trasmits a point load applied above to a wider area of the soil foundation underneath. To examine this load dispersion capability of the mattress foundation, model experiments were carried out on lab-floor. Expecially, the effect of the thickness of the mattress and the subgrade modulus of the soil foundation on load dispersion are considered. The load distribution and the tensile force generated on geogrid of the upper part of the mattress are examined in the paper.

• 기술발표회
• /
• 통권2006호
• /
• pp.135-145
• /
• 2006

Soil nailing systems are generally many used in underground excavations and reinforcements of slopes since the first construction as a temporary retaining wall in 1993, Korea. In recently, they are many attempts to expand the permanent reinforcements of slopes However, experimental studies related to soil nailing systems are insufficient Specially, there are no researches related in the large scaled load tests of soil nailed walls in Korea In this study, a case study on the large scaled load tests of soil nailed walls is introduced and the behavior characteristic of them is investigated Also, they are proposed allowable deformation corresponding to the serviceability limit of soil nail walls and ultimate deformation corresponding to the collapse state of the walls. These results can be applied to the maintenance management of soil nailed walls And analysis on the required minimum factor of safety of soil nailed walls using the relation curve of load ratio and deformation ratio are carried out

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.129-141
• /
• 1999

This paper presents the results of plate load test and dynamic load test performed to evaluate the performance of geocell where it is used to reinforce soft subgrade for high-speed railroad. Efficacy of geocell was observed in increase in bearing capacity of subgrade and reduction of thickness of reinforced sub-ballast. Plate load tests were carried out at four different places with varying foundation soil strength as a function of number of geocell layer, type of filler material, thickness of cover soil, and the presence of non-woven geotextile. Dynamic load tests were performed in a laboratory. The test soil chamber consists of, from the bottom, 50 cm thick clayey soil, one layer of geocell filled with crushed stone, 10 cm thick crushed stone cover, reinforced sub-ballast of varying thickness, 35 cm thick ballast. This configuration was determined based on the results of numerical analysis and plate load tests. For each set of the dynamic load tests, loads were applied more than 80,000 times. One layer of geocell underlying a 10 cm thick cover soil led to an increase in bearing capacity three to four times compared to a crushed stone layer of the same thickness substituted for the geocell and cover soil layer. Given the test conditions, the thickness of reinforced sub-ballast can be reduced by approximately 35 cm with the presence of geocell.

• 풍력에너지저널
• /
• 제14권1호
• /
• pp.14-20
• /
• 2023

In this study, using the commercial software Bladed developed by DNV for integrated load calculation of wind turbines, the generation of seismic waves according to soil type based on Korea's domestic regulations, and load calculation considering earthquake conditions were performed according to the IEC standard, and load in the main coordinate system of the fixed offshore wind turbine was calculated. By comparing the calculated load with the design load of the fixed offshore wind turbine, the effect of earthquake loads according to soil type on the main components of fixed offshore wind turbines was evaluated. As a result of the evaluation, when an earthquake load on a wind turbine is considered, the effect of the earthquake load is related to the natural frequency of the major components and the magnitude of the adjacent acceleration in the earthquake response spectrum, and the earthquake load differs according to soil type and may exceed the design load.

• 한국지반환경공학회 논문집
• /
• 제11권9호
• /
• pp.27-38
• /
• 2010

모형실험과 유한요소법에 의한 수치해석을 통하여 측방변형지반 속에 설치된 매설관에 작용하는 측방토압을 관찰하였다. 모형실험에서는 모형지반 속에 매설관을 설치한 후 모형지반에 측방변형이 발생될 수 있게 모형실험기를 제작하여 실제 지반에서의 상황을 시뮬레이션하였다. 이 모형실험기는 지반의 변형속도를 여러 가지로 조절할 수 있게 제작하였다. 여러 가지 직경과 형상의 매설관에 대하여 실험을 실시함으로써 이들 요인이 측방토압에 미치는 영향을 조사하였다. 모형실험결과 연약지반의 측방유동으로 인하여 매설관에 작용하는 측방하중은 연약지반의 측방변형속도가 빠를수록 크게 작용하였다. 순간재하 조건에 의한 수치해석 결과는 지반변형속도가 중간 정도 빠르기인 0.3mm/min에서 1.0mm/min 사이의 지반변형속도의 조건에서 실시한 모형실험 결과와 유사하였다. 대부분의 모형실험결과 지반변형량이 작은 시점에서 측방하중의 제1항복이 발생하며 이때까지 탄성변형거동을 보이다가 제2항복에 이르기까지 하중이 한 동안 수렴되는 소성거동을 보였다. 지반변형이 계속하여 증가하면 측방하중도 다시 증가하여 압축거동을 보였다. 그러나 빠른 지반변형속도에서의 실험 결과에서는 항복하중에 도달한 후 수렴과정이 없이 계속하여 하중이 증가하였음을 볼 수 있다. 매설관의 직경이 클수록 측방유동 연약지반 속에 설치된 매설관에 작용하는 측방하중의 크기와 하중증가 속도가 컸으며 초기지반변형에서는 측방하중이 매설관의 직경 및 형상의 영향을 적게 받지만 지반변형량이 증가함에 따라 그 영향이 크게 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.151-158
• /
• 2000

The lateral deformation of one row pile groups was investigated based on analytical study and a numerical analysis. The emphasis was on quantifing the load transfer of pile groups subjected to lateral soil movement. An analytical method to consider pile-soil interaction in weathered soil was developed using load-transfer curve methods. Through the comparative study, it is found that the prediction by present approach is in good agreement with the general trend observed by in-situ measurements.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.315-328
• /
• 2019

This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.37-47
• /
• 2004

본 연구에서는 암반에 근입된 현장타설말뚝의 지지력을 높이기 위해 말뚝 주면에 soil nail을 정착한 타설말뚝의 축하중 해석을 수행하여 그 거동을 파악하였으며, soil nail의 유ㆍ무에 따른 보강효과를 분석하였다. 이를 위해 Beam-Column모델을 이용하여 현장타설말뚝과 지반을 모델링하고 하중전이곡선을 사용하여 말뚝지반의 상호작용을 고려하였다. 무보강 말뚝의 경우, 서해대교 현장재하시험결과 및 범용 프로그램인 Shaft 4.0의 해석결과와 비교ㆍ분석을 수행하였다. 보강형 말뚝의 경우에는 말뚝이 타설되는 지반을 [사질토+풍화암], [사질토+연암], [사질토+경암]으로 나누어 지반조건에 따른 soil nail의 보강효과를 파악하였다. 본 해석결과와 현장 실측치, SHAFT 4.0의 해석결과를 분석한 결과 제안된 주면하중전이함수 중 사질토에서는 Vijayvergiya의 함수, 암반에서는 O'Neill-Hassan의 함수가 암반에 근입된 현장타설말뚝의 거동을 비교적 적절히 예측함을 알 수 있었다. 이를 토대로 예측한 보강형 현장타설말뚝의 보강효과는 soil nail까지 하중전이가 나타나는 풍화암층에서 가장 크고, 암질이 양호한 연암과 경암층에서는 그 효과가 그다지 크지 않음을 알 수 있었다.