• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.419-429
• /
• 2020

To investigate the effect of spatial variability on hydraulic properties of unsaturated soils, a numerical model is set up which can simulate seepage process in an unsaturated heterogeneous soil. The unsaturated heterogeneous soil is composed of matrix sand embedded with a small proportion of clay for simulating the heterogeneity. Soil-water characteristic curve and unsaturated hydraulic conductivity curve of the unsaturated soil are expressed by Van Genuchten model. Hydraulic parameters of the matrix sand are considered as random fields. Different autocorrelation lengths (ACLs) of hydraulic parameter of the matrix sand and different proportions of clay are assumed to investigate the influence of spatial variability on the equivalent hydraulic properties of the heterogeneous soil. Four model sizes are used in the numerical experiments to investigate the influence of scale effects and to determine the sizes of representative volume element (RVE) in the numerical simulations. Through a number of Monte Carlo simulations of unsaturated seepage analysis, the means and the coefficients of variations (COVs) of the equivalent hydraulic parameters of the heterogeneous soil are calculated. Simulations show that the ACL and model size has little influence on the means of the equivalent hydraulic parameters, but they have a large influence on the COVs of the equivalent hydraulic parameters. The size of an RVE is mainly affected by the ACL and the proportion of heterogeneity. The influence of spatial variability on the hydraulic parameters of the heterogeneous unsaturated soil can be used as a guidance for geotechnical reliability analysis and design related to unsaturated soils.

• 한국토양비료학회지
• /
• 제42권Spc호
• /
• pp.8-13
• /
• 2009

심층토 내에서의 흐름과 이동과정을 포함하는 연구와 관리 측면에서 수학모델에 대한 관심도가 점점 증가하고 있다. 로제타는 토성이나 용적밀도 자료와 같은 대체 토양자료로부터 불포화수리특성에 대한 자료를 추정하는 프로그램이다. 이와 같은 형태의 모델은 애초 기본 토양자료를 수리특성자료로 전환하기 시작한 이래 대체 측정수단으로서 PTF라 불리워졌다. 이러한 기능은 유사-실험모델을 사용하여 예측한 자료를 근간으로 하여 직간접적으로 토양수분을 추정할 수 있다.

• Geomechanics and Engineering
• /
• 제36권4호
• /
• pp.343-353
• /
• 2024

The hydraulic anisotropic behavior of unsaturated soil has not been fully explored in relation to the grain-size distribution. The present study conducted laboratory assessments to examine the hydraulic anisotropy condition of statically compacted specimens in various initial states. The investigation incorporated the concept of hydraulic anisotropy by employing two discrete forms of soil stratification: horizontal-layering (HL) and vertical-layering (VL). The examined soils comprised sandy silt and silty sand, exhibiting either unimodal or bimodal soil-water characteristic curve (SWCC). This study aimed to investigate the potential correlation between the hydraulic anisotropy ratio and soil properties. The present study established a correlation between the hydraulic anisotropy ratio and several soil parameters, including fine content, dry density, plastic limit, and liquid limit. The study results indicate a non-linear relationship between the percentage of fine and dry density in soils with unimodal and bimodal soil-water characteristic curve (SWCC) and hydraulic anisotropy ratio.

• 한국농공학회논문집
• /
• 제62권6호
• /
• pp.11-20
• /
• 2020

We estimated the spatio-temporally distributed soil moisture using Sentinel-1A/B SAR (Synthetic Aperture Radar) sensor images and soil moisture data assimilation technique in South Korea. Soil moisture data assimilation technique can extract the hydraulic parameters of soils using observed soil moisture and GA (Genetic Algorithm). The SWAP (Soil Water Atmosphere Plant) model associated with a soil moisture assimilation technique simulates the soil moisture using the soil hydraulic parameters and meteorological data as input data. The soil moisture based on Sentinel-1A/B was validated and evaluated using the pearson correlation and RMSE (Root Mean Square Error) analysis between estimated soil moisture and TDR soil moisture. The soil moisture data assimilation technique derived the soil hydraulic parameters using Sentinel-1A/B based soil moisture images, ASOS (Automated Synoptic Observing System) weather data and TRMM (Tropical Rainfall Measuring Mission)/GPM (Global Precipitation Measurement) rainfall data. The derived soil hydrological parameters as the input data to SWAP were used to simulate the daily soil moisture values at the spatial domain from 2001 to 2018 using the TRMM/GPM satellite rainfall data. Overall, the simulated soil moisture estimates matched well with the TDR measurements and Sentinel-1A/B based soil moisture under various land surface conditions (bare soil, crop, forest, and urban).

• Geomechanics and Engineering
• /
• 제9권6호
• /
• pp.815-827
• /
• 2015

The mechanical behavior of soil and soil-rock mixture is investigated via the discrete element method. A non-overlapping combination method of spheres is used to model convex polyhedron rock blocks of soil-rock mixture in the DEM simulations. The meso-mechanical parameters of soil and soil-rock interface in DEM simulations are obtained from the in-situ tests. Based on the Voronoi cell, a method representing volumtric strain of the sample at the particle scale is proposed. The numerical results indicate that the particle rotation, occlusion, dilatation and self-organizing force chains are a remarkable phenomena of the localization band for the soil and soil-rock mixture samples. The localization band in a soil-rock mixture is wider than that in the soil sample. The current research shows that the 3D discrete element method can effectively simulate the mechanical behavior of soil and soil-rock mixture.

• 한국토양비료학회지
• /
• 제39권5호
• /
• pp.259-267
• /
• 2006

수리 전도도는 수리구배에 대한 플럭스의 비율을 나타내며, 포화된 토양에서의 물의 이동이 포화수리전도도이고 불포화된 토양에서의 이동이 불포화수리전도도이다. 일반적인 밭 상태에서의 토양수분 조건은 불포화수리전도도로 표시하는 것이 적절하나 그 상태를 표현하기가 쉽지 않다. 토양의 불포화 상태를 나타내는데 가장 많이 쓰이고 있는 VGM(van Genuchten Mualem) 모형은 토양수분 포텐셜과 수분함량의 함수로 구성된 모형이며 몇 가지 매개변수가 필요하다. VGM 모형의 매개변수를 얻기 위해 본 연구에서는 VGM 모형의 매개변수를 계산해주는 프로그램인 Rosetta를 사용하였다. Rosetta 모형은 신경그물 얼개(neural network)를 이용하여 토양의 물리적 자료들인 토성이나 모래, 미사, 점토 함량 또는 용적밀도나 33 kPa, 1500 kPa에서의 토양수분 함량 자료를 가지고 VGM의 매개변수인 Ko(effedive saturated hydraulic conductivity), ${\theta}r$(residual soil water content), ${\theta}s$(saturated soil water content), L, n, m(=1-1/n)을 예측하는 모형으로 미국 농무성(USDA-ARS)에서 개발한 프로그램이다. Rosetta를 이용하여 10kPa에서의 불포화수리전도도를 예측하였다. 또한 Gardner와 Wooding의 모형을 기반으로 하여 만들어진 장력침투계의 포화수리전도도 값을 Gardner식에 적용하여 1, 3, 5, 7 kPa에서의 불포화수리전도도 값을 17개 토양통을 대상으로 하여 구했다. 토양수분 potential이 3 kPa에서는 물의 이동이 거의 없는 토양들이 있었는데 반해 남계통을 비롯한 학곡통, 회곡통, 백산통, 상주통, 석천통, 예산통 등 7개의 토양은 3 kPa에서도 약간의 물의 이동이 있었다. 또한, 1 kPa에서 물의 이동은 삼각통에서 $40.8{\times}10^{-5}cm{\cdot}sec^{-1}$로 이동 속도가 가장 컸으며 그 뒤로 예산통, 화봉통, 학곡통, 백산통 등이 토양에서 빠른 속도로 이동하였다. 가천통이나 석천통 및 우곡통은 1 kPa에서의 이동 속도가 아주 느린 토양으로 판단되었다. PTF와 VG모형에 의해 얻어진 10 kPa에서의 수분함량 예측 값을 VGM 모형에 적용해 불포화수리전도도를 구했을 때, VG모형에 의한 예측 값은 존재하는 반면 PTF에 의한 값은 결측 값이 존재해 그 적용에 한계가 있었다. 그리고 1 kPa에서 불포화 수리전도도를 VGM 모형으로 예측한 값과 측정된 값을 Gardner 모형으로 해석한 값을 비교했을 때 자갈이 없는 토양에서는 일정한 경향(exponential 함수)이 존재한 반면, 자갈이 있는 토양에서는 경향을 발견할 수가 없었다. 이상의 결과로 불포화 수리전도도 특성평가에 대한 VGM 모형의 적용성을 살펴보았을 때는 우리나라와 같이 경사지가 많고 토심이 깊지 않으면서 자갈함량이 많은 토양에서는 한계가 있을 것으로 판단되었다.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.1-11
• /
• 2013

Unsaturated hydraulic conductivity function is one of key parameters to solve the flow phenomena in problems of landslide. Prediction models for hydraulic conductivity function related to soil-water retention curve equations in many geotechnical applications have been still used instead of direct measurement of the hydraulic conductivity function since prediction models from soil-water retention curve equations are attractive for their fast and easy use and low cost. However, many researchers found that prediction models for the hydraulic conductivity function can not predict the hydraulic conductivity exactly in comparison with experimental outputs. This research introduced an inverse analysis to evaluate the hydraulic conductivity function corresponding to experimental output from the flow pump system. Optimisation process was carried out to obtain the hydraulic conductivity function. This research showed that the inverse analysis with flow pump system was suitable to assess the hydraulic conductivity in unsaturated soil, and the prediction models for the hydraulic conductivity were led to the significant discrepancy from actual experimental outputs.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.46-52
• /
• 2010

Derivative analysis, based on the derivative of the drawdown as a function of time (i.e., rate of drawdown change), was applied to the evaluation of hydraulic parameters of the aquifer as an aid of the aquifer test interpretation based on the Theis solutions. Pumping tests were conducted at a coastal fractured aquifer in Muan county, Korea, of which the drawdown data, measured at the two observation wells, were used for derivative analysis. Wellbore storage and transition period were hard to identify at conventional log-log and semi long plots, but was easily recognized by distinctive curves of positive unit slope, hump and negative unit slope in the derivative plot. For the observation well of OW-2 at which wellbore storage and transition lasted over an hour, conventional aquifer analysis would suffer from the uniqueness problems and in further result in erroneous hydraulic parameters. Derivative analysis was found to be effective for distinguishing the drawdown data directly reflecting the aquifer property from those reflecting non aquifer effects such as wellbore storage and transition, which offers a unified methodology to yield correct hydraulic parameters from aquifer test data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.344-351
• /
• 2005

In this paper, a reliability-groundwater flow program is developed by coupling the 2-D finite element numerical groundwater flow program with first and second order reliability program. From the parametric study of hydraulic conductivity of soil layers, the increase of both mean and variance of hydraulic conductivity results in the increase of probability of exceeding the threshold hydraulic head. The probability of failure was more sensitive to parameters of weathered granitic soil and rock located at the middle and bottom of the excavation than those at the other locations. It can be recommended from this study that the reliability method, which can include the uncertainty of soil parameters, should be performed together with the deterministic analysis to compensate the weakness of the latter analysis for the groundwater flow problem of underground excavations.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.583-598
• /
• 2022

The Compaction effect is important for evaluating the subgrade construction. However, there is little research exploring the compaction quality of deep soil using hydraulic compaction. According to reinforcement effect analysis, dimensional analysis is adopted in this work to analyze subgrade compactness within the effective reinforcement depth, and a prediction model is obtained. A hydraulic compactor is then employed to carry out an in-situ reinforcement test on gravel soil subgrade, and the subgrade parameters before and after reinforcement are analyzed. Results show that a reinforcement difference exists inside the subgrade, and the effective reinforcement depth is defined as increasing compactness to 90% in the depth direction. Layered compactness within the effective reinforcement depth is expressed by parameters including the drop distance of the rammer, peak acceleration, tamping times, subgrade settlement, and properties of rammer and filler. Finally, a field test is conducted to verify the results.