• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.34-50
• /
• 2022

Principal component analysis (PCA) was conducted using hydrochemical data in four testbeds (A to D) built for the development of site characterization technologies to assess the hydrochemical processes controlling the hydrochemistry in each site. The PCA results indicated the nitrogen loading to deep bedrock aquifers through permeable fractures in Testbed A, the chemical weathering enhanced with the biodegradation of petroleum hydrocarbons in Testbed B, the reductive dechlorination in Testbed C, and the different hydrochemistry depending on the depth to bedrock in Testbed D, consistent with the characteristics of each site. In Testbeds B and D, outliers seemed to affect the PCA result probably due to the small number of samples, whereas the PCA result was still consistent with site characteristics. This study result indicates that the PCA is widely applicable to hydrochemical data for the assessment of major hydrochemical processes in contamination sites, which is useful for site characterization when combined with other site characterization technologies, e.g., geological survey, geophysical investigation, borehole logging. It is suggested that PCA is applied in contaminated sites to interpret hydrochemical data not only for the distribution of contamination levels but also for the assessment of major hydrochemical processes and contamination sources.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1325-1335
• /
• 2007

The utility of soil-gas surveys is directly proportional to their accuracy in reflecting and representing changes in the subsurface concentrations of source compounds. Passive soil-gas vapor-phase is merely a fractional trace of the source, so, as a matter of convenience, the units used in reporting detection values from EMFLUX surveys are smaller than those employed for source-compound concentrations. According to the Leaking Underground Storage Tank(LUST) Program Annual Report, approximately 16 U.S. million dollars were spent for environmental site investigations at over 1,600 Underground Storage Tank(UST) sites and approximately over 1,000 acres of land was characterized and remediated in the State of Illinois in the year of 2003 alone. The main purpose of this study is to propose an idea to significantly reduce the site investigation cost by utilizing a passive soil-gas survey and conventional intrusive drilling method and to fully define the three dimensional characteristics of subsurface contamination from two industrial drycleaning facilities.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.24-27
• /
• 2005

This study has focused on investigation on As and heavy metal contamination derived from metalliferous mining activities in the Choongbuk Province in Korea. Soil, mine effluent, surface water and ground water samples were taken in and around 27 abandoned metal mines, and analyzed for As, Cd, Cu, Ni, Pb and Zn using AAS and anions in water samples using IC. In general, the heavy metal concentrations in soils decreased with Increasing distance from the each mine audit. Tailings and mine waste soils from several mines contained over the guideline of Soil Conservation Act in Korea. Soil samples from the Seobo, Honga, Daehwa, Jeungjadong, Youngbo and Munbaek mines contained over the action levels of the metals due to intensive mining activities. Therefore, a proper remediation work needs to control the metal dispersion around the mines.

• Analytical Science and Technology
• /
• v.25 no.1
• /
• pp.14-18
• /
• 2012

Rn-222 was used as a natural radioactive isotope tracer to evaluate non-aqueous phase liquid(NAPL) contaminated soil and aquifer. In the case of soil sample, Rn-222 concentration was inversely decreased with diesel concentration in the granite soil sample and it was decreased about 30% at the 13% diesel contaminated soil. For evaluating trichloroethylene (TCE) contaminated aquifer, the natural radioisotope Rn-222 was used as naturally occurring partitioning tracer for the approximate localization and semiquantitative assessment of the TCE source zone. Rn-222 was analyzed for the estimation of TCE contamination ranges of the acquifer in the contaminated site at Wonju in Korea.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.1-15
• /
• 2020

Monitoring and assessing terminal electron accepting processes (TEAPs) are one of the most important steps to remediate contaminated sites via various in-situ techniques. TEAPs are a part of the microbial respiration reactions. Microorganisms gain energy from these reactions and reduces pollutants. Monitoring TEAPs enables us to predict degradability of contaminants and degradation rates. In many countries, TEAPs have been used for characterization of field sites and management of groundwater wells. For instance, US Environmental Protection Agency (EPA) provided strategies for groundwater quality and well management by applying TEAPs monitoring. Denmark has also constructed TEAPs map of local unit area to develop effective groundwater managing system, particularly to predict and assess nitrogen contamination. In case of Korea, although detailed soil survey and groundwater contamination assessment have been employed, site investigation guidelines using TEAPs have not been established yet. To better define TEAPs in subsurface environments, multiple indicators including ion concentrations, isotope compositions and contaminant degradation byproducts must be assessed. Furthermore, dissolved hydrogen concentrations are regarded as significant evidence of TEAPs occurring in subsurface environment. This review study introduces optimal sampling techniques of groundwater and dissolved hydrogen, and further discuss how to assess TEAPs in contaminated subsurface environments according to several contamination scenarios.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.57-66
• /
• 2010

This study is described in heavy metal pollution by the stony mountain development using field case. The heavy metal pollution is investigated for nearby area (soil and stream) of the developed stony mountain, and then the countermeasure using contamination analysis is suggested. The investigation result indicated that contamination of Sammak stream caused by the stone dust and leachate at the stony mountain development. Therefore, the heavy metal pollution is evaluated by using Pollution Index(PI). The evaluation results confirmed that the contaminated groundwater was the leading cause of the contamination in Sammak stream and nearby soil. Therefore, the Permeable Reaction Barrier(PRB), which has a environmentally-friendly reactant, should be applied to control a heavy metal of groundwater, and it will be a reasonable countermeasure.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.414-419
• /
• 2016

The aims of this study were to investigate microbial contamination levels and to survey sanitation management between Good Agricultural Practices (GAP) and non-GAP farms of lettuce and cucumber. The samples (lettuce, cucumber, soil, agricultural water, gloves, and packing plastic bag) were tested to analyze sanitary indicator bacteria (total aerobic bacteria, coliforms and Escherichia coli) and major pathogenic bacteria (Staphylococcus aureus, Bacillus cereus). In the lettuce farms, the contamination levels of total aerobic bacteria and coliforms in GAP farms were little lower than non-GAP farms or similar. Staphylococcus aureus and Bacillus cereus in soil and agricultural water of GAP farms were detected at higher levels than non-GAP farms in soil and agricultural water. In the case of cucumber farms, levels of total bacteria and Bacillus cereus in soil and total bacteria and coliform in gloves of GAP farms were higher than those of non-GAP farms, and other bacteria contamination levels in collected samples were similar. These results indicate that agricultural products produced from GAP farm still exhibited potential microbial risks. According to the field survey, a sanitation management in GAP farms was insufficient. These results could be useful as basic data to suggestion of plan for preventing microbial contamination and to improvement of GAP certification.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.119-128
• /
• 2008

Laboratory analytical results of 22 sets of hydrophobic adsorbent coils containing surface soil-vapor and two soil samples collected by conventional intrusive method from each boring location at two active dry cleaning facilities in the State of Illinois, U.S.A, were presented to evaluate the performance of soil-vapor survey. The most critical factor to determine the effectiveness of soil-vapor survey is the distance from the soil-vapor sampling device to the actual contamination, which is a function of soil porosity, permeability, primary lithology, and other geological and hydrogeological site-specific parameters. Also this factor can be affected by the history of contaminant-generating operations. The laboratory analytical results in this study showed longer dry cleaning operation history (i.e., 50 years) and presence of fine sand at the beneath Site B allow the contaminants to migrate farther and deeper over a fixed time compared to Site A(i.e., 35 years and silty clay) so that the soil-vapor survey is not likely the most effective environmental site investigation method alone for Site B. However, for Site A, the soil-vapor survey successfully screened the site to identify the location reporting the highest soil concentration of chlorinated solvents.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.64-74
• /
• 2022

The conceptual site model (CSM) is used as a key tool to support decision making in risk based management of contaminated sites. In this work, CSM was applied in Jeonju Industrial Complex where site investigation for groundwater contamination was conducted. Site background information including facility types, physical conditions, contaminants spill history, receptor exposure, and ecological information were collected and cross-checked with tabulated checklist necessary for CSM application. The CSM for contaminants migration utilized DNAPL transport model and narrative CSMs were constructed for source to receptor pathway, ecological exposure route, and contaminants fate and transport in the form of a diagram or flowchart. The component and uncertainty of preliminary CSM were reviewed using the data gap analysis while taking into account the purpose of the survey and the site management stage at the time of the survey. Through this approach, the potential utility of CSM was demonstrated in the site management process, such as assessing site conditions and planning follow-up survey work.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.45-53
• /
• 1999

The soil samples were measured at 90 sites of Soil's Network In 1997~1998 which was established for the investigation of soil contamination in Seoul. This study was more focused to measure and analyze for BTEX(Benzene, Toluene, Ethylbenzene and Xylene) concentration in the Soil Network. Also, the samples were analyzed by Purge & Trap method. As a result, the BTEX were detected at all sampling sites in Seoul. The Min. Max and Mean BTEX concentration were respectively 0.047mg/kg, 2.618mg/kg and 0.437mg/kg in 1998. The concentration of the BTEX detected at all sampling sites was lower than that of the intervention standards(at industrial areas) of Soil Preservation Act.