• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.23-32
• /
• 2017

For exposed slopes, the weathering degree over time has a major effect on the engineering properties of rocks and the slope stability. Rocks are gradually changed by weathering into soil over time, and the resulting physical, chemical and mechanical changes of rocks affect the engineering stability of the slope. However, there are not many ways to objectively evaluate the weathering degree of a slope. In this study, therefore, to investigate the weathering characteristics of rocks, granite, gneiss and shale distributed in the Chungbuk region were sampled by weathering stage and changes in their component minerals and tissues were investigated. Furthermore, artificial weathering was induced using the freezing and thawing test and quantitatively investigated through porosity and absorption rate. In addition, the changes of microcracks due to artificial weathering were evaluated through box fractal dimension ($D_B$). Through mineralogical study the phase change of constituting minerals, the growth of secondary minerals, the development of micro-cracks and the fabric changes due to weathering were observed. The mineralogical, chemical and engineering evaluations of the weathering degree through the experimental results in this study are expected to be useful for analyzing the weathering characteristics and causes by rock type and for proposing a methodology to evaluate the degradation of physical properties comparatively and quantitatively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.71-88
• /
• 2003

The DRASTIC system is widely used for assessing regional groundwater pollution susceptibility by using hydrogeological factors such as depth to water, net recharge, aquifer media, soil media, topography, vadose zone media, hydraulic conductivity. This study is providing Modified Drastic Model to which lineament density, land use, influence of groundwater drawdown caused by tunnel excavation are added as additional factors using geographic information system, and then to evaluate groundwater contamination potential of ${\bigcirc}{\bigcirc}$ area. For statistical analysis, vector coverage per each factor is converted to grid layer and after each correlation coefficient between factors, covariance, variance, eigenvalue and eigenvector by principal component analysis of 3 direction, are calculated, correlation between factors is analyzed. Also after correlation coefficients between general DRASTIC layer and rated lineament density layer, between general DRASTIC layer and rated land use layer, between general DRASTIC layer and rated tunnel excavation influence layer are calculated, final modified DRASTIC model is constructed by using them with each weighting. When modified DRASTIC model was compared with general DRASTIC model, contamination potential in modified DRASTIC model is fairly detailed and consequently, vulnerable area which has high contamination potential could be presented concretly.

• The Korean Journal of Mycology
• /
• v.24 no.4 s.79
• /
• pp.310-321
• /
• 1996

Five strains AF027, AF069, AF2001, AF2011 and SD02 of Pseudomonas cepacia were isolated from soil, and the antifungal cyclic lipopeptides(CLP) i.e, CLP027A, CLP069A, Cepacidine A, CLP2011A and CLP02A were produced from each strains, respectively. Nitrogen and carbon sources in media were proved to be important factors for the production of CLP and among them, polypeptone-S, glucose and fructose were the most effective. It appeared that compounds CLP027A and CLP069A were identical with Cepacidine A and Xylocandine A, respectively. contain aspartic acid as amino acid component, are differentiated from Xylocandine A containing asparagine. Although molecular weight, amino acid composition and UV spectrum of CLP2011A and CLP02A are same with those of Cepacidine A, it is postulated that these compounds are not identical with Cepacidine A when the antifungal spectra and antifungal activity were compared to those of Cepacidine A.

• Korean Journal of Microbiology
• /
• v.45 no.1
• /
• pp.63-68
• /
• 2009

The exo-polysaccharide producing microorganism, Aureobasidium pullulans IMS-822, was isolated and identified from soil. The viscosity-average molecular weight of exo-polysaccharide was calculated as $8.9{\times}10^5$ by Mark-Houwink equation. The sugar component of exo-polysaccharide was determined as glucose by HPLC analysis. The IR spectra indicated that the exo-polysaccharide has an absorption peak at 890 $cm^{-1}$ for the ${\beta}-configuration$ of D-glucan. The $^{13}C$ NMR signal at ${\delta}$ 86.62 ppm arose from the substituted C-3 of glucose. The signal at ${\delta}$ 72.11 ppm was assigned to C-6 of branched ${\beta}-(1{\to}3)-D-glucosyl$ residues. Viscosity and Congo red reaction indicated that {\beta}-(1{\to}3)(1{\to}6)-glucan$ produced by A. pullulans IMS-822 has a highly ordered hydrogen-bond dependent conformation in aqueous solution, which collapses in strong alkaline solution.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.187-196
• /
• 2013

This study is on the corrosion of iron objects caused by sulfides in undersea environment. The corrosion state of objects in seawater and their damage state after underwater and left in highly humid air were studied. The samples of this study were four iron objects which had been taken out from undersea mud layer located in Taean Mado, Chungcheongnamdo. SEM-EDS and XRD analyse on the objects to check whether they have sulfides or not. The result of analysis suggested that the major component of corrosion product generated in undersea deposit soil is sulfur(S) and iron sulfide(FeS) is formed as sulfide. However, there was no clear corrosion on the surface of objects which was exposed to sea water because of the impact of concretion which covered the surface. In order to check the damage status of iron objects after they had been taken out of sea water, exposure tests in high humidity environment and dehumidified environment were done on the corrosion products. The result of the test suggested that the oxidization of iron sulfide corrosion product makes iron sulfate ($FeSO_4$) and sulfuric acid ($H_2SO_4$) and they can cause secondary corrosion of iron objects. Therefore, it is believed that the iron sulfide corrosion product of iron objects taken out from underwater environment should be removed by all means and the keeping environment of the iron objects should also maintain dehumidified state.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.5
• /
• pp.434-448
• /
• 2014

The aerosol characteristics between haze episode and Asian dust event were identified in January and March, 2013 in Gwang-ju of Korea to investigate the metal elements, ionic concentrations and carbonaceous particles of $PM_{2.5}$ and $PM_{10}$. In the haze episode, the concentrations were increased 1~3.2 times of ionic species and 1.6~2.7 of metal elements. Especially, the concentration of $NO{_3}{^-}$, $SO{_4}{^2-}$ and $NH{_4}{^+}$ consists of 50 percent in ionic species during haze episode that was higher than Asian dust event. This suggests that secondary aerosols from anthropogenic air pollution were mainly contributed by haze episode. During the Asian dust event, increase of metal concentrations was higher than haze episode because of remarkable increase of Ti, K and Fe originated from soil. The concentrations of carbonaceous particles were increased 2.5 times during haze episode, and 2.4 times of OC and 2.1 times of EC during Asian dust event in $PM_{2.5}$. However, these aerosol mass concentration does not affect the OC/EC ratio. The average equivalence ratios of cations/anions in $PM_{2.5}$ were 0.99 in haze episodes and 0.94 during non-event day. The neutralization factor of $NH_3$ was higher than that of $CaCO_3$. Futhermore, $NH{_4}{^+}$ aerosol was aged due to atmospheric stagnation that might be affected by the haze episode.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.1-16
• /
• 2020

The APEX model has been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. Recently, a key component of APEX application, named APEX-Paddy, has been modified for simulating water quality by considering paddy rice management practices. In this study, the performance of the APEX-Paddy model was evaluated using field data at Iksan experimental paddy sites in Korea. The discharge and pollutant load data during 2013 and 2014 were used to both manually and automatically calibrate the model. The APEX auto-calibration tool (APEX-CUTE 4.1) was used for model calibration and sensitivity analysis. Results indicate that APEX-Paddy reasonably performs in predicting runoff discharge rate and nitrogen yield. However, sediment and phosphorus yield is not correctly predicted due to the limitation of model schemes. With APEX-Paddy, the performance in reproducing the discharge and nitrogen yield is found to be a satisfactory level after manual calibration. The manually calibrated model performed better than the automatically calibrated model in nearly all comparisons. For runoff, manual calibration reduced PBIAS while R² and NSE values of the automatically calibrated model were the same as the manual calibration. For T-N, NSE and PBIAS were reduced when using manual calibration, whereas R² value was the same as manual calibration. The limitation of the APEX-Paddy model for predicting sediment, as well as the phosphorous yield, was discussed in this study.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.53-68
• /
• 2015

Longitudinal strain is an important component of seismic design for buried pipelines. A design procedure which determines the wavelength from site natural period and shear wave velocity of the soil layer and closed-form solutions of pipelines under a harmonic motion is typically used in design. However, the applicability of the procedure has not yet been thoroughly investigated. In this paper, displacement-time histories extracted from 1D site response analyses are used in 3D shell-spring model to accurately predict the response of pipelines. The results are closely compared to those from the design procedure. The area of interest is East Siberia. Performing a site response analysis to determine site specific displacement time history is highlighted. The site natural period may be used to predict the predominant period of the acceleration time history, but cannot be used to estimate the predominant period of the displacement time history. If an accurate estimate of the predominant period of the displacement time history is provided, it is demonstrated that the design equation can be successfully used to predict the response of pipelines.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.152-158
• /
• 2000

This study was conducted to investigate the influence of feeding illite(yellow soil component) on meat quality of pork. 40 pigs were fed with commercial formulated feed (control group) and 1% illite added feed(treatment group). Pigs grown up to 100~110kg of weight were slaughtered in commercial abattoir. After chilling for 24hours, samples were collected from M. longissimus dorsi muscle, and stored at $4\pm$$1^{\circ}C$ for analyses. The physico-chemical properties was determined during storage days as follows. Ultimate pH was not significantly different between control and treatment(pH 5.58 and 5.60, respectively). Water-holding capacity measured using filter paper press method of the treatment group was slightly higher than that of the control group. Cooking loss of treatment group were significantly lower than that of the control group at 1 and 7 days(p〈0.05). Shear force between control and treatment group was not different. L*- and a*-value were not significantly different between the two groups(p〉0.05), but b*-value of treatment group was lower than that of the control group(p〈0.05). The drip loss of all samples was increased with storage days, and that of the treatment group was significantly lower than that of the control at 1 and 3 day storage. Meat color measured using NPPC pork quality standards was not significantly different between the two groups(p〉0.05), but marbling content of the treatment group was significantly higher than that of the control group(p〈0.05). Sensory characteristics of, flavor taste and tenderness did not show significant differences(p〉0.05), but juiciness of the treatment group showed higher value than that of the control group(p〈0.05)