• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.5
• /
• pp.189-194
• /
• 2018

Unmanned technology is a representative technology that integrates various technologies like electric, electronic, mechanical, artificial intelligence, ICT technology, ect. In special emphasize, ground technology has been developing exponentially in the military field and expanding its utilization area. The patent information analysis method presented in this study, proposes a new patent analysis methodology for patent information analysis and patent information on unmanned ground technology. The patent information analysis processor has 6 levels to extract core patents and technologies. The process consists of: selection of technology to be analyzed, classification of detailed technology / key keyword selection, patent information collection / noise reduction, selection of patent information analysis method, patent information analysis, finally, core patents and key technologies that are extracted. Patent information on unmanned ground technology is also analyzed in this study. First, the technical classification of ground unmanned technology is carried out in detail. The core technology and core patents of ground unmanned technology were extracted through CPP and IPC code connectivity analysis. The results of patent information analysis using proposed patent information analysis method that can be applied to various fields of technology and analysis. These can be used as a material to forecast the direction of future research and development on the technology to be analyzed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.68-75
• /
• 2014

Soluble nitrogen produced from anaerobic digestor is able to have a strong influence on the effluent water quality of municipal wastewater treatment plants during a winter season in particular. The modeling results using the GPS-X simulation software shows that the soluble nitrogen concentration generated from the anaerobic digestor is 214.1 mg/L in the return flow and 6.2 mg/L in the inflow of the primary settler higher than those in nonexistence of the anaerobic digestor, respectively. In the case of using a separation process (flotation thickener) in order to treat the return flow from the sludge treatment system, the soluble nitrogen concentration in the effluent from the separation process and in the inflow of the primary setter could be 6.0 mg/L higher and 0.7 mg/L lower than those of nonexistence of the process, respectively. The modeling results propose the need of the equipments to be able to remove the soluble nitrogen ($NH_3-N$) produced from the digestor in the improvement projects of anaerobic digestor in municipal wastewater treatment plants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.1-9
• /
• 2013

In recent years, numerous mega-size and complex civil infrastructures have been constructed worldwide. For the more precise construction and maintenance process management of these civil infrastructures, the application of a variety of smart sensor-based structural health monitoring (SHM) systems is required. The efficient management of both sensors and collected databases is also very important. Recently, several kinds of database access technologies using Quick Response (QR) code and Augmented Reality (AR) applications have been developed. These technologies provide software tools incorporated with mobile devices, such as smart phone, tablet PC and smart pad systems, so that databases can be accessed very quickly and easily. In this paper, an AR-based structural health monitoring technique is suggested for sensor management and the efficient access of databases collected from sensor networks that are distributed at target structures. The global positioning system (GPS) in mobile devices simultaneously recognizes the user location and sensor location, and calculates the distance between the two locations. In addition, the processed health monitoring results are sent from a main server to the user's mobile device, via the RSS (really simple syndication) feed format. It can be confirmed that the AR-based structural health monitoring technique is very useful for the real-time construction process management of numerous mega-size and complex civil infrastructures.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.46-55
• /
• 2006

(주)지노믹트리는 DNA 마이크로어레이 기술을 기반으로 하는 분자진단회사로서, 다음의 세가지 사업에 전력하고 있다. 첫째는 독창적이며 특화된 바이오마커 발굴기술 (MAGIC system)을 바탕으로 각종 암진단을 위한 바이오마커 개발연구 두 번째는 당사의 원천 기술인 다중동시검출 시스템을 이용한 질병 진단 시스템 및 증폭시스템 세 번째는 마이크로어레이 기술을 이용한 유전자 발현 분석, Array CGH, DNA 메틸레이션 분석 그리고 miRNA 검출 등의 지노믹스시대의 연구를 위한 토탈솔루션을 제공하고 있다. 지난 5년간의 마이크로어레이 기반기술을 이용한 자체연구 활동을 수행하면서 축적된 마이크로어레이 관련기술 노-하우들을 국내 마이크로어레이 연구자들에게 공급하기 위하여 노력하고 있다. 특히 당사의 지노믹서비스 부문은 유전자 발현 분석 솔루션 제공을 위해서 자체적으로 제작하여 공급하고 있는 human cDNA(17K/25K) 및 rat cDNA (5.0K) 마이크로어레이, Human (22K) 및 mouse (10K) 올리고뉴클레오타이드 마이크로 어레이 그리고 미생물 연구를 위한 대장균 (6K) 및 폐렴균 (2.2K) 올리고뉴클레오타이드 마이크로어레이 제공 및 이를 이용한 유전자 발현 분석 서비스를 제공하고 있다. 체적으로 제작되는 마이크로어레이 서비스는 2001년 도입한 ISO9001 품질인증시스템의 기반하에서 제작부터 생산까지의 엄격한 품질관리 과정을 거쳐서 고품질의 마이크로어레이를 이용한 분석서비스를 제공 하고 있다. 또한 고객요구형 서비스를 위하여 국외 유수의 마이크로어레이 회사 (Agilent, Microarray Inc, TIGR, Eurogentec 등)의 whole genome 기반의 마이크로어레이 제품을 이용한 분석서비스를 제공하고 있으며 마이크로어레이 실험을 위해서 필수적으로 이용되고 있는 시약 (labeling kit), 마이크로어레이 hybridization을 위한 hardware (hybridization chamber, hnay centrifuge)등을 자체적으로 개발하여 공급하고 있다. DNA copy number 측정을 위한 Array CGH 분석을 위해서는 자체적으로 제작공구하고 있는 human cDNA 마이크로어레이 (17K/25K) 그기고 rat (5.0K) 마이크로어레이를 이용한 분석서비스 및 whole genome 기반의 Agilent 올리고뉴클레오타이드 CGH 어레이 (44K, 35Kb resolution)를 이용한 분석서비스를 제공하고 있다. Epigenetic study를 하는 연구자들을 위한 메틸레이션 마이크로어레이 분석 서비스를 제공하고 있다. 기존분석법인 Bisulfite 처리기반의 분석이 아닌 enzyme digestion후 PCR 증폭방법을 이용한 분석방법을 이용함으로써, bisulfite 처리에 의한 DNA 손실문제를 최소화 하였다. 현재 50개의 문헌을 통해 잘 보고된 메틸레이션 유전자들에 대한 분석서비스를 제공하고 있으며, 지속적으로 표적컨텐츠의 숫자를 증가시킬 예정이다. 최근 많은 연구자들의 관심을 끌고 있는 micro RNA 검출을 위한 DNA 마이크로어레이 서비스를 제공할 예정이다 (2006년 3월 출시). 현재 까지 알려진 약 320개의 모든 miRNA를 탑재하고 있는 소형 DNA 마이크로어레이를 이용한 분석서비스로서 1장의 마이크로어레이 실험을 통하여 알려진 모든 miRNA의 비교분석이 가능하다. 마이크로어레이 실험 뿐만 아니라 data 분석을 위한 software도 상당히 중요한 비중을 차지하고 있다 이를 위하여 (주)지노믹트리는 Agilent에서 개발한 GeneSpring GX (유전자 발현 분석), Signet (마이크로어레이 database) 및 GeneSpring GT (SNP 분석)를 공급하고 있다. 통계적인 기반 지식의 없은 일반 user들을 위한 간편하면서도 종합적인 기능을 포함하고 있는 우수한 프로그램으로 이미 국제적으로 많은 인정을 받고 있다. (주)지노믹트리는 국내외 많은 연구자들의 경제적, 시간적 연구여건을 고려한 마이크로어레이 토탈솔루션을 제공하고 있으며, 실험 분석에서 data 마이닝 그리고 마이크로어레이 실험 디자인에 이르는 토탈솔루션을 제공하고 있다.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.389-399
• /
• 1999

This study was conducted to develop an application software, SIDAS3D(Stand Inventory Data Analysis System for 3 Dimensional Representation), of which the purpose of development is to make it easier to analyze and display the 3D spatial structure of a forest stand, based on the data such as tree position, species, DBH, height, clear length of individual trees, and crown width. This program has a statistical analysis function for stand attributes per hectare and displays simple graphs of stand statistics such as the distribution of diameters, heights, and volumes. It also has two additional functions, of which one is to display the 3D image of stand structure and the other is to display the image of crown projection. In addition, this program provides an imaginary treatment simulation function, which can visually confirm the suitability of silvicultural treatments on computers. To test the precision and reliability of SIDAS3D, data obtained by the precision forest inventory method were used. Statistical analysis ability of SIDAS3D was compared with that of SAS. And its representational ability was compared with that of TreeDraw. According to the verification, SIDAS3D was superior to SAS and TreeDraw in both the data processing time and the interpretative ability of results. It was concluded that SIDAS3D could be used to help users efficiently make decisions for appropriate silvicultural treatments and rational management plans because it has analysis functions providing various valuable information.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.7-16
• /
• 2020

The mobile electronic notification service delivers notifications through mobile phone text or app-based message push to solve various problems of the paper-based mail service. And it is a service that an electronic document relay company proves to prove delivery. In order for public and administrative agencies to provide mobile electronic notification service, the user's identification information of the mobile phone number or the subscribed app is required. To overcome these limitations, ICT-regulated sandbox system was used to allow collective conversion of users' resident registration numbers into connecting information (CI). Therefore, in this paper, we propose a technical method for safe management of user CI in mobile electronic notice service, identity verification of electronic notice readers, and prevention of forgery and forgery of electronic notices. Through the proposed method, it is confirmed that the service can be activated by minimizing the adverse function of the mobile electronic notification service by securing the user's convenience and technical safety for the CI.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.163-173
• /
• 2020

In this study, on-site corporate instructors participated as student-cum-workers in a degree-linked high skills Meister course to improve job competency and practical ability as proposed in the Work-Study Career Vision. Evaluation questions were then developed and their validity was verified by assessing satisfaction related to expected goals in enhancing advanced training guidance and competency as an evaluator. Satisfaction assessment was conducted based on training preparation, training implementation, training effectiveness and training administration. The Delphi Method was adopted and a total of 48 items were developed in 6 categories under 4 main areas. There were 7 evaluation items on the satisfaction of training course development under training preparation, 21 evaluation items related to the satisfaction of Off-JT and OJT courses under training implementation, 16 evaluation items related to the satisfaction of increased competency as an on-site corporate instructor and the satisfaction of enhanced practical skills and skills application at work under training effectiveness, as well as 6 evaluation items to assess satisfaction with administrative support under training administration. The final conformity assessment was conducted based on the stability, content validity ratio, consensus and convergence indicators of the developed items. Results of this study do not only apply to quality management of the high skills Meister course which is being promoted as a pilot project for work-study programs, but also serves as a rationale that may be considered as a basic research tool in the collection of various opinions to derive overall system improvement factors for the work-study high skills Meister course.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.42-47
• /
• 2007

To reduce the chattering errors of reed switch sensors in the automatic remote measurement of water meter a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact switch by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used mostly in measurement application to detect the rotational or translational displacement. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just mounted simply on the conventional mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor two steel leaf springs make mechanical contact and apart repeatedly as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But the digital data is occurred difference or won by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing vehicle near to the switch sensor installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using filter algorithm and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.269-274
• /
• 2013

To proportionally control the electronic valve position of the actuator, we designed and fabricated PCU, CPT, and rotary absolute optical encoder for the detection of absolute angular position in the actuator. We also designed and constructed the test system by using DAQ hardware and Labview. We designed PCU to convert 1-5 V, 0-5 V, 0-10 V, 2-10 V voltage signals and 4-20 mA current signals to the voltage signals in the common 0.5-2.5 V range. We designed CPT to output 4-20 mA current signals corresponding to the valve positions based on the PWM signal input from the MCU. We also designed 20 bit optical encoder by using infrared LED and infrared transistor and made the serial communication with the main board possible. When we tested PCU and CPT with DAQ hardware and Labview software, they operated correctly with the small errors within ${\pm}0.003$ V and ${\pm}0.01$ mA, respectively, showing that our actuator has the excellent performance to employ as the industrial proportional-valve-actuator. The resolution of the encoder was $11.25^{\circ}$ and the maximum revolution to detect was 32,768.

• Composites Research
• /
• v.27 no.5
• /
• pp.190-195
• /
• 2014

This paper predicts the complex permittivity of MWNT added epoxy depending on agglomeration by numerical analysis. 1wt% MWNT added epoxy specimen is prepared using 3-roll-mill method and its complex permittivity is measured in X-band (8.2~12.4 GHz) using freespace measurement system. The analytic model is comprised of cube epoxy and perfect sphere agglomeration. The complex permittivity of the agglomeration model is predicted by complex permittivity mixing rule using the measured complex permittivity of epoxy and 1 wt% MWNT added epoxy. Commercial electromagnetic analysis software, CST, is used to obtain S-parameter of the analytic model and MATLAB code is used to calculate complex permittivity from the S-parameter. It is confirmed that the complex permittivity increases when the agglomeration size decreases.