• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.589-600
• /
• 2018

For foundations in permafrost regions, the displacement characteristics are uncertain because of the randomness of temperature characteristics and mechanical parameters, which make the structural system have an unexpected deviation and unpredictability. It will affect the safety of design and construction. In this paper, we consider the randomness of temperature characteristics and mechanical parameters. A stochastic analysis model for the uncertain displacement characteristic of foundations is presented, and the stochastic coupling program is compiled by Matrix Laboratory (MATLAB) software. The stochastic displacement fields of an embankment in a permafrost region are obtained and analyzed by Neumann stochastic finite element method (NSFEM). The results provide a new way to predict the deformation characteristics of foundations in permafrost regions, and it shows that the stochastic temperature has a different influence on the stochastic lateral displacement and vertical displacement. Construction disturbance and climate warming lead to three different stages for the mean settlement of characteristic points. For the stochastic settlement characteristic, the standard deviation increases with time, which imply that the results of conventional deterministic analysis may be far from the true value. These results can improve our understanding of the stochastic deformation fields of embankments and provide a theoretical basis for engineering reliability analysis and design in permafrost regions.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.950-958
• /
• 2017

Viaduct increases the height of subway catenary, namely magnifies lightning attraction scope that lead to higher possibility of suffering lightning stroke. Therefore, it is necessary to analyze performance of lightning striking to catenary of subway in viaduct section and propose an improving lightning protection scheme. In this paper, using ATP-EMTP simulation software to establish an associated model to evaluate lightning withstand level of catenary with existing lightning protection schemes including arrester and grounding point, an improving lightning protection scheme is proposed - every pillar ground earth and arresters are installed with some installing spacing between 200m to 400m based on lightning damage degree and reliability requirements - according to analyzing results: while lightning withstand level is lowest for lightning striking to the neutral pillar, lightning withstand level is greatest for lightning striking to the both-ends pillar that arrester and grounding point are both installed; grounding point could obviously improve lightning withstand level for lightning striking to ground wire while arrester could obviously improve the lightning withstand level for lightning striking to catenary; every pillar ground earth could enhance the lowest lightning withstanding level up to 2.5 times than of that pillar ground earth across every 200m.

• 농촌계획
• /
• 제18권4호
• /
• pp.117-127
• /
• 2012

The demand of rural tourism industry has increased among the urbanites in South Korea, in due to the increase of leisure activity and the emergence of ageing society. Rural amenity resources are gaining various interests, in the value creation and promotion of tourism. In this study, the propensities of city dwellers were separated by life-style classification, and each affinity to the rural amenity resources was examined in accordance with the separation. A questionnaire survey of urbanites in the southern area of Gyeonggi-do, the most populous province in South Korea, was conducted to analyze the preference of city dwellers about rural amenity resource and life-style of themselves. For statistical verification, $IBM^{(R)}$ $SPSS^{(R)}$ Statistics 20 software was used for frequency, reliability, factor and multiple regression analysis of this research. The results of the statistical analyses found a noticeable characteristic in life-style classification. The affinities of urbanites can be classified into four congregations of life-style factors in this statistical model. Each congregation of the factors was named as 'Self-development-oriented', 'Leisure-oriented', 'Achievement-oriented', and 'Culture-oriented' life-style, to represent the characteristics for convenience' sake. Among these styles, only 'Self-development-oriented' and 'Achievement-oriented' showed the positive correlation with rural amenity resources in the multiple regression analysis. In addition, the rural amenity resources were also analyzed in accordance with the life-styles classification of urbanites. City dwellers showed the highest interest to the 'natural resource management facility resource' in natural resources, the 'traditional heritage resource' in cultural resources, and the 'community resource' in social resources. Meanwhile, they showed less interest to 'agricultural and scenery resources' in natural resources, 'specialty production resource' in cultural resources, and 'cooperative farming' in social resources. These characteristics can be constructed as meaning that the urbanites who concern self-development and achievement of their lives have high interest in rural amenity resources, and the main interest of them is not 'return-to-the-farm'(歸農) but 'return-to-the-home'(歸村).

• 전기학회논문지
• /
• 제66권5호
• /
• pp.757-764
• /
• 2017

As the reduction of greenhouse gases(GHGs) emission has become a global issue, the microgrid markets are growing rapidly. With the sudden changes in the market, Korean government suggested a new business model called 'Self-Sufficient Energy Islands'. Its main concern is a stand-alone microgrid composed of Distributed Energy Resources(DERs) such as Renewable Energy Sources(RESs), Energy Storage System(ESS) and Fuel Cell, in order to minimize the emission of GHGs. According to these trend, this paper is written to propose an optimal sizing method of DERs in a stand-alone microgrid by using Genetic Algorithm(GA), one of the representative stochastic methods. It is to minimize the net present cost with the variables, size of RESs and ESS. In the process for optimization, the sunless days are considered as additional constraints. Through the case study analysis, the size of DERs installed in a microgrid system has been computed using the proposed method in MATLAB. And the result of MATLAB is compared with that of HOMER(Hybrid Optimization of Multiple Energy Resources), a well-known energy modeling software.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.19-24
• /
• 2018

IMS는 모바일 사용자에게 IP 멀티미디어 서비스를 제공하기 위한 프레임워크이다. 분산 제어기를 통하여 플로우 처리를 수행하기 할 수 있는 IMS 기반 시그널링 플랫폼의 구성은 새로운 진화적 접근 방식으로 다양한 멀티미디어 서비스들의 신뢰성 및 QoS를 보장하기 위하여 필요하다. SDN은 분산 및 동적 그리고 고비용적인 아키텍처이며, 오늘날의 응용 프로그램을 위한 고대역폭 및 동적인 특성에 적합하도록 노력하고 있다. SDN은 제어 평면이 데이터 평면과 통신할 수 있는 방법을 요구한다. 이러한 방법들 중 하나는 OpenFlow이며, 이는 원격 SDN 제어기를 사용하여 네트워크 자원을 관리하는 대표적인 표준 프로토콜 및 인터페이스이다. 본 논문에서는 SDN 기술을 IMS 아키텍처와 통합하기 위한 직관한 방법을 제안한다. 따라서 기존 텔레콤 통화 서비스를 관리하는 IMS 기반 신호 플랫폼을 통하여, OpenFlow를 사용하여 플로우 처리를 수행하는 결합된 아키텍처 모텔을 제안하고 구축한다. 또한, 제안 구조로부터 얻은 적절한 실험 결과들을 설명한다.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.23-29
• /
• 2015

Purpose: This study aimed to assess the reliability of measurements performed on three-dimensional (3D) virtual models of maxillary defects obtained using cone-beam computed tomography (CBCT) and 3D optical scanning. Materials and Methods: Mechanical cavities simulating maxillary defects were prepared on the hard palate of nine cadavers. Images were obtained using a CBCT unit at three different fields-of-views (FOVs) and voxel sizes: 1) $60{\times}60mm$ FOV, $0.125mm^3$ ($FOV_{60}$); 2) $80{\times}80mm$ FOV, $0.160mm^3$ ($FOV_{80}$); and 3) $100{\times}100mm$ FOV, $0.250mm^3$ ($FOV_{100}$). Superimposition of the images was performed using software called VRMesh Design. Automated volume measurements were conducted, and differences between surfaces were demonstrated. Silicon impressions obtained from the defects were also scanned with a 3D optical scanner. Virtual models obtained using VRMesh Design were compared with impressions obtained by scanning silicon models. Gold standard volumes of the impression models were then compared with CBCT and 3D scanner measurements. Further, the general linear model was used, and the significance was set to p=0.05. Results: A comparison of the results obtained by the observers and methods revealed the p values to be smaller than 0.05, suggesting that the measurement variations were caused by both methods and observers along with the different cadaver specimens used. Further, the 3D scanner measurements were closer to the gold standard measurements when compared to the CBCT measurements. Conclusion: In the assessment of artificially created maxillary defects, the 3D scanner measurements were more accurate than the CBCT measurements.

• The Journal of Advanced Prosthodontics
• /
• 제6권5호
• /
• pp.346-350
• /
• 2014

PURPOSE. Impact forces in implant supported FDP (fixed dental prosthesis) are higher than that of tooth supported FDPs and the compositions used in frameworks also has a paramount role for biomechanical reasons. The aim of this study was to evaluate the flexural strength of two different zirconia frameworks. MATERIALS AND METHODS. Two implant abutments with 3.8 mm and 4.5 mm platform were used as premolar and molar. They were mounted vertically in an acrylic resin block. A model with steel retainers and removable abutments was fabricated by milling machine; and 10 FDP frameworks were fabricated for each Biodenta and Cercon systems. All samples were thermo-cycled for 2000 times in $5-55^{\circ}C$ temperature and embedded in $37^{\circ}C$ artificial saliva for one week. The flexural test was done by a rod with 2 mm ending diameter which was applied to the multi-electromechanical machine. The force was inserted until observing fracture. The collected data were analyzed with SPSS software ver.15, using Weibull modulus and independent t-test with the level of significance at ${\alpha}=.05$. RESULTS. The mean load bearing capacity values were higher in Biodenta but with no significant differences (P>.05). The Biodenta frameworks showed higher load bearing capacity ($F_0=1700$) than Cercon frameworks ($F_0=1520$) but the reliability (m) was higher in Cercon (m=7.5). CONCLUSION. There was no significant difference between flexural strengths of both zirconia based framework systems; and both Biodenta and Cercon systems are capable to withstand biting force (even parafunctions) in posterior implant-supported bridges with no significant differences.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.512-519
• /
• 2004

This paper described the free vibration characteristics of Optimized H Type (OHT) spacer grids (SG) supporting the PWR fuel rod. The vibration test and the finite element (FE) analysis are performed under the free boundary condition and the clamped at two points (or three points) in the bottom which is the same one as the experimental condition for the dummy rod continuously supported by spacer grids. A modal test is conducted by the impulse excitation method using an impulse hammer and an accelerometer, and the TDAS module of the I-DEAS software is used to acquire and analyze the sensor signals. The softwares related to the FE analysis are the I-DEAS for the geometrical shape modeling and meshing, and the ABAQUS for solving. The fundamental frequency of the OHT SG by experiment under a clamped condition at two points is 175.18 Hz, and shows a bending mode. We think there is no resonance between the fuel rod and the SG because the SG's frequency is higher than that of the fuel rod existing in the range from 30 to 120 Hz. The fundamental frequency of the SG under the free boundary condition is 349.2 Hz showing a bending mode, and the results between the test and the analysis have a good agreement with maximum 7 ％ in error It is also found that the FE analysis model of the OHT SGs to analyze an impact, a buckling and vibration et al. has been generated with reliability.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권6호
• /
• pp.231-236
• /
• 2014

의료 초음파 영상에서 조영제의 전이시간과 조영효과 변화 곡선 특성에 대한 파라미터는 각종 소화기 질환을 진단하는 중요한 인자가 된다. 이러한 진단인자들에 대한 육안판별의 어려움을 극복하기 위하여 파라미터 영상의 자동 생성 기법을 구현할 수 있는데 이 과정에서 마이크로 버블형태의 노이즈와 호흡에 의한 흔들림 현상은 추출된 영상의 신뢰도를 저하 시킨다. 이에 본 연구에서는 MRF(Markov Random Field) 모델을 기반으로 하는 최적화 기법을 적용하여 파라미터 영상을 개선하는 방법을 고찰하며, 호흡에 의한 영상의 흔들림을 보정하기 위한 영상추적 기법을 제시한다. 세부적으로 초음파 동영상 원시 데이터로부터 호흡주기 추출 기법을 구현하였으며, 추출된 주기를 기반으로 모멘텀 요소와 동적 가중치를 반영하는 ROI(Region of Interest) 추적 알고리즘을 적용하였다. 또한 영상 개선 기법에 적용되는 Gibbs 샘플러의 에너지 함수를 정의하고 실제 간질환 진단 데이터를 대상으로 영상 개선 효과를 실험적으로 평가하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권8호
• /
• pp.425-433
• /
• 2020

This paper aims to develop a conceptual framework for evaluating the impact of motivational factors on the work results of lecturers at Vietnam National University, Hanoi (VNU), one of two leading multidisciplinary and multi-sectoral national universities in Vietnam. This study has considered wages and other benefits (WB), training and development (TD), working environment (WE) and working motivation (WM) as motivational factors, and proposed a structural model of the impact of motivational factors on the work results of lecturers at VNU. The empirical analysis used data from the survey data of 321 university lecturers. Comprehensive, valid, and reliable tools (SPSS 26 and SmartPLS 3.0 software) are used to evaluate rigorous statistical tests including convergence validity, discriminatory validity, reliability, and average variance extracted to analyze and verify the gathered data, and the hypotheses developed. The result of path analysis shows that four motivational factors constitute a structured system with different degrees of influence on the work results of lecturers. There is also a positive relationship between the motivational factors and the work results of lecturers. As a result, it can be concluded that all hypotheses developed are supported. Several recommendations are further suggested to improve the performance of lecturers at VNU.