• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.159-159
• /
• 2009

Existence of physical moving parts (ex. check valve) produces several problems (mechanical abrasion, deterioration of reliability, limited temperature performances etc.) in driving pumps. To overcome such problems, we proposed a valveless piezoelectric micro-pump which has new type volume transferring mechanism. The proposed micro-pump has a double faced disk type vibrator that can generate peristaltic motion formed by traveling wave in each surface of a disk. This type of micro-pump is able to apply to a fluid supply system that provides two different kinds of fluid simultaneously. In this paper, we propose a simple and novel design of piezoelectric micro-pump that is peristaltically by piezoelectric actuators and allows the removal of the need for valves of other physically moving parts. The finite elements analysis on the proposed pump model was carried out to verify its operation principle using the commercial analysis software.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1139-1144
• /
• 2019

정밀측정장비의 성능을 진단 및 확인하는 교정 시스템은 교정결과의 신뢰성 확보를 위해 국제규격의 요구조건을 준수함으로 교정결과의 오판정 위험을 최소화하고 있다. 본 논문에서는 교정기관에서 고성능의 장비를 획득 및 운영하기에 불가능한 경우 불확도 요인 분석을 통한 교정 시스템 적합성 평가 방안과 가드밴드 기법을 이용하여 성능기준을 대체하는 최적화된 시험기준 산출모형을 제안한다. 제안된 방법은 교정 시스템의 정량적인 평가기준과 국제규격에서 요구되는 허위수락위험 확률 기준을 충족을 위한 최적화된 시험기준을 제공한다.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1046-1054
• /
• 2014

In this paper, a hardware prototype for the 10kVA 11-level MMC was built and various experimental works were conducted to verify the operation algorithms of MMC. The hardware prototype was designed using computer simulation with PSCAD/EMTDC software. After manufactured in the lab, the hardware prototype was tested to verify the modulation algorithms to form the output voltage, the balancing algorithm to equalize the sub-module capacitor voltage, and the redundancy operation algorithm to improve the system reliability. The developed hardware prototype can be utilized for analyzing the basic operation and performance improvement of MMC according to the modulation and redundancy operation scheme. It also can be utilize to analyze the basic operational characteristics of HVDC system based on MMC.

• 산경연구논집
• /
• 제11권4호
• /
• pp.7-18
• /
• 2020

Purpose: This research investigates the impact of technology adoption on organisation productivity. The framework has three independent variables viz. technological change, information technology (IT) infrastructure, and IT knowledge management and one dependent variable as organisational productivity. Research design, data and methodology: An explanatory research design with a quantitative research method was employed, and data was collected using a self-administered questionnaire using online as well as an offline survey. The sample consisted of 300 IT managers and senior-level executives (production as well as service team) in leading IT companies in Malaysia selected using snowball sampling. Normality and reliability assessment was performed in the first stage utilising SPSS 22, and Confirmatory Factory Analysis (CFA) was performed with maximum likelihood estimation to assess the internal consistency, convergent validity, and discriminant validity. Finally, Structural Equation Model (SEM) and path analysis are conducted using AMOS 22. Results: The research findings demonstrated that technological change and IT infrastructure positively and significantly impact the organisation's productivity while IT knowledge management has significant but negative impact on organizational productivity of IT companies in Malaysia. Conclusion: The research concludes that all three factors plays important role in deciding organizational producvity. Recommendations, implications, limitations and future research avenues are discussed.

• 한국항공운항학회지
• /
• 제16권2호
• /
• pp.1-11
• /
• 2008

Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency Management (ACM) systems. An ACM system is expected to adapt autonomously to fault conditions with the goal of still achieving mission objectives by allowing some degradation in system performance within permissible limits. ACM performance depends on supporting technologies like sensors and anomaly detection, diagnostic/prognostic and reasoning algorithms. This paper presents the development of a generic prototype test bench software framework for developing and validating ACM systems for advanced propulsion systems called the Propulsion ACM (PACM) Test Bench. The architecture has been implemented for a Monopropellant Propulsion System (MPS) to demonstrate the validity of the approach. A Simulink model of the MPS has been developed along with a fault injection module. It has been shown that the ACM system is capable of mitigating the failures by searching for an optimal strategy. Furthermore, the concepts of Validation and Verification (V&V) of such systems are introduced with relevant examples.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.1025-1034
• /
• 2020

This paper aims to develop a conceptual framework for Green Supply Chain Management (GSCM) that takes into account the effect of GSCM drivers on implementing GSCM practices in Vietnam FDI companies. This study has considered organizational commitment, social network, and government support as GSCM driver factors and proposed a structural model of the relationships between GSCM drivers and GSCM practices in Vietnam FDI companies. The empirical analysis used data from 192 questionnaires which used a comprehensive, valid, and reliable tool (SPSS 26 and SmartPLS 3.0 software) to evaluate rigorous statistical tests including convergence validity, discriminatory validity, reliability, and Average Variance Extracted (AVE) to analyze and verify the gathered data and develop the hypothesis. The result of path analysis shows that GSCM driver factors constitute a structured system with different degrees of influence on GSCM drivers and GSCM practices. Organizational commitment and government support has a positive relationship with both GSCM drivers and GSCM practices, while social network only has a positive relationship on GSCM drivers. As a result, the testing of the relationship between GSCM drivers and GSCM practices has been verified and supported. The findings of this study can help managers and decision-makers to push the implementation of GSCM practices in FDI companies.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.87-95
• /
• 2011

The urgent VAI(Vital Area Identification) method development is required since 'The Act of Physical Protection and Radiological Emergency' that is established in 2003 requires an evaluation of physical threats in nuclear facilities and an establishment of physical protection in Korea. The KAERI(Korea Atomic Energy Research Institute) has developed the VAI methodology and VAI software called as VIPEX(Vital area Identification Package EXpert) for identifying the vital areas. This study is to demonstrate the applicability of KAERI's VAI methodology to a hypothetical facility, and to identify the importance of information of cable and piping runs when identifying the vital areas. It is necessarily needed to consider cable and piping runs to determine the accurate and realistic TEPS(Top Event Prevention Set). If the information of cable and piping runs of a nuclear power plant is not considered when determining the TEPSs, it is absolutely impossible to acquire the complete TEPSs, and the results could be distorted by missing it. The VIPEX and FTREX(Fault Tree Reliability Evaluation eXpert) properly calculate MCSs and TEPSs using the fault tree model, and provide the most cost-effective method to save the VAI and physical protection costs.

• 유통과학연구
• /
• 제19권5호
• /
• pp.5-12
• /
• 2021

Purpose: Research on supply chain sustainability is important for exporters When the factor of sustainable development is considered by the businesses as well as governments of all countries. Research on supply chain sustainability is important for exporters. Sustainable supply chain management and supply chain dynamics will help enterprises adapt to changes in the business environment. This study analyzes the impact of sustainable supply chain management, and supply chain dynamic capabilities on the sustainable development of exporting enterprises in Vietnam. Research design, data, and methodology: The research model and survey are designed based on previous studies after surveying export enterprises. With 185 samples collected from export enterprises. The Structural Equation Modeling (SEM) analysis technique is used. Data analysis is performed on SPSS and AMOS software (Reliability test, Confirmatory Factor Analysis, SEM). Results: Sustainable supply chain management and supply chain dynamic capabilities all have positive effects on the sustainable development of businesses (sustainable development is measured by distribution: measuring economic efficiency, social efficiency, and environmental performance). Conclusions: From the results of this study, the authors also made several recommendations to help export enterprises develop sustainability based on sustainable supply chain management and supply chain dynamic capabilities.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• Advances in concrete construction
• /
• 제13권4호
• /
• pp.327-337
• /
• 2022

This paper is concerned with the vibration analysis of middle layer cylindrical shell made of functionally graded material. The outer layers and inner layer are composed of functionally graded and isotropic material respectively. The Rayleigh Ritz method is applied to solve the presented shell dynamics equations. Two configurations are constructed with layers distributions. Fundamental natural frequencies of the three layered cylindrical shell is plotted against the circumferential wave number with different power law exponents. The frequency decreases with the increase of power law exponent. The fundamental natural frequencies first decreases and fall down to its minimum value, after frequencies increases with circumferential wave number. This is due to change in the magnitude of extensional and bending energies of the cylindrical shells. The computer software MATLAB has been employed for the computation of presented frequencies and tested the results obtained in order to assess the accuracy and validity of the cylindrical shell model for predicting the vibration frequencies of cylindrical shell.