• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.39-47
• /
• 2016

In software R&D artifacts including documents and program code are produced. There are two kinds of software R&D artifacts: Research artifacts and development artifacts. Research artifacts include software R&D planning document, annual report, final report, research note and so on. Software development artifacts include software requirements, software design description, testing plan, test report, and program code. It is important to verify the documents and to test code to check the direction of the R&D. Moreover, we should check relationships as such completeness and consistency between research and development artifacts. The verification and testing help project manager and researchers understand what they do during software projects. Therefore, in this study, we present a process to verify documents and program in software R & D. In the process we check documents produced in software R&D and test program code. We describe the process by using Essence elements including alpha, activity, and competency. We present a case study to show the effectiveness of the process.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.457-460
• /
• 2002

The image quality of three-dimensional (3D) images has been widely investigated by the qualitative analysis method. A need remains for an objective and quantitative method to assess the image quality of 3D volume-rendered images. The purpose of this study was to evaluate the quantitative accuracy of distance measurements on 3D volume-rendered images of a dry human skull by using multi-detector computed tomography (MDCT). A radiologist measured five times the twenty-one direct measurement line items composed among twelve reference points on the skull surface with a digital vernier caliper. The water filled skull specimen was scanned with a MDCT according to the section thicknesses of 1.25, 2.50, 3.75, and 5.00 mm for helical (high quality; pitch 3:1) scan mode. MDCT data were reconstructed with its acquisition section thickness and with 1.25 mm section thickness for all scans. An observer also measured seven times the corresponding items on 3D volume-rendered images with measuring tools provided by volumetric analysis software. The quantitative accuracy of distance measurements on the 3D volume-rendered images was statistically evaluated (p-value < 0.05) by comparatively analyzing these measurements with the direct distance measurements. The accuracy of distance measurements on the 3D volume-rendered MDCT images acquired with 1.25, 2.50, 3,75 and 5.00 mm section thickness and reconstructed with its section thickness were 48%, 33%, 23%, and 14%, respectively. Meanwhile, there were insignificant statistical differences in accuracy of distance measurements among 3D volume-rendered images reconstructed with 1.25 mm section thickness for the each acquisition section thickness. MDCT images acquired with thick section thickness and reconstructed with thin section thickness in helical scan mode should be effectively used in medical planning of 3D volume-rendered images. The quantitative analysis of distance measurement may be a useful tool for evaluating the quantitative accuracy and the defining optimal parameters of 3D volume-rendered CT images.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.543-551
• /
• 2014

This study has searched to find a program in order to manage simply and practically use the expelled AtoN database from the AtoN Simulator and to support the idea decision for the AtoN placement. It examines a program that manages AtoN database through the hierarchy structure, history card and endowment with condition same as a scenario. And accomplishes this study's goal owing to realizing AtoN operational software that helps for visual, hearing sense, fixed amount verification upon AtoN placement project. The AtoN operational software contributes not only flexible control like a newly establishment, relocation etc, but also supports idea decision for AtoN placement plan through many functions such as condition search, virtual sailing and fixed amount appraisal result exhibition, etc. Through utilization of this, it is to help upon the presupposition of the impact to ship or sailor about many designs and in addition, upon the judgment of whether or not for the efficiency and appropriation of the design. It is expected to reduce possible failure costs and management costs due to AtoN design and placement plans, because to compare more various designs thru the easier verification method.

• Radiation Oncology Journal
• /
• v.19 no.4
• /
• pp.319-326
• /
• 2001

Purpose : Planning target volume (PTV) for tumors in abdomen or thorax includes enough margin for breathing-related movement of tumor volumes during treatment. Depending on the location of the tumor, the magnitude of PTV margin extends from 10 mm to 30 mm, which increases substantial volume of the irradiated normal tissue hence, resulting in increase of normal tissue complication probability (NTCP). We developed a simple and handy method which can reduce PTV margins in patients with liver tumors, respiratory motion reduction device (RRD). Materials and methods : For 10 liver cancer patients, the data of internal organ motion were obtained by examining the diaphragm motion under fluoroscope. It was tested for both supine and prone position. A RRD was made using MeV-Green and Styrofoam panels and then applied to the patients. By analyzing the diaphragm movement from patients with RRD, the magnitude of PTV margin was determined and dose volume histogram (DVH) was computed using AcQ-Plan, a treatment planning software. Dose to normal tissue between patients with RRD and without RRD was analyzed by comparing the fraction of the normal liver receiving to $50\%$ of the isocenter dose. DVH and NTCP for normal liver and adjacent organs were also evaluated. Results : When patients breathed freely, average movement of diaphragm was $12{\pm}1.9\;mm$ in prone position in contrast to $16{\pm}1.9\;mm$ in supine position. In prone position, difference in diaphragm movement with and without RRD was $3{\pm}0.9\;mm$ and 12 mm, respectively, showing that PTV margins could be reduced to as much as 9 mm. With RRD, volume of the irradiated normal liver reduced up to $22.7\%$ in DVH analysis. Conclusion : Internal organ motion due to breathing can be reduced using RRD, which is simple and easy to use in clinical setting. It can reduce the organ motion-related PTV margin, thereby decrease volume of the irradiated normal tissue.

• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.59-67
• /
• 1993

Since society rapidly change, we need accurate and rapid information. Due to complication and rapid change of national infrastructure system, we meet a limitation of 2-D information management. Currently most digital cartographic data is acquired by manual digitizing with a tablet. Recently high cost scanner is widely used and preprocessing and postprocessing software of scanning are developed, so we expect its availability. In this study, we know that scanning is more convenient than digitizing with a tablet for digital mapping, also, possibility of 3-D modeling of vectorized document is suggested. Because information rapidly provided in the planning and implementation, operation efficiency and advance are archived in water supply project. Improvement of service for need of citizen and possibility combined information system connected with other system is presented.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.1032-1043
• /
• 2015

ETRI's Co-Pilot project is aimed at the development of an automated vehicle that cooperates with a driver and interacts with other vehicles on the road while obeying traffic rules without collisions. This paper presents a core block within the Co-Pilot system; the block is named "Co-Pilot agent" and consists of several main modules, such as road map generation, decision-making, and trajectory generation. The road map generation builds road map data to provide enhanced and detailed map data. The decision-making, designed to serve situation assessment and behavior planning, evaluates a collision risk of traffic situations and determines maneuvers to follow a global path as well as to avoid collisions. The trajectory generation generates a trajectory to achieve the given maneuver by the decision-making module. The system is implemented in an open-source robot operating system to provide a reusable, hardware-independent software platform; it is then tested on a closed road with other vehicles in several scenarios similar to real road environments to verify that it works properly for cooperative driving with a driver and automated driving.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.715-724
• /
• 2023

Solar energy forecasting is essential for (1) power system planning, management, and operation, requiring accurate predictions. It is crucial for (2) ensuring a continuous and sustainable power supply to customers and (3) optimizing the operation and control of renewable energy systems and the electricity market. Recently, research has been focusing on developing solar energy forecasting models that can provide daily plans for power usage and production and be verified in the electricity market. In these prediction models, various data, including solar energy generation and climate data, are chosen to be utilized in the forecasting process. The most commonly used climate data (such as temperature, relative humidity, precipitation, solar radiation, and wind speed) significantly influence the fluctuations in solar energy generation based on weather conditions. Therefore, this paper proposes a hybrid forecasting model by combining the strengths of the Prophet model and the GRU model, which exhibits excellent predictive performance. The forecasting periods for solar energy generation are tested in short-term (2 days, 7 days) and medium-term (15 days, 30 days) scenarios. The experimental results demonstrate that the proposed approach outperforms the conventional Prophet model by more than twice in terms of Root Mean Square Error (RMSE) and surpasses the modified GRU model by more than 1.5 times, showcasing superior performance.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.337-345
• /
• 2007

Nowadays, it is convenient to use 3D modeling tools for general planning before construction. Normally, a 3D model is built with 3D CAD such as 3D Studio Max, Maya, etc. or simply with AutoCAD. All these software packages are effective in building 3D models but difficult to use, because many provided functions and tools require prior knowledge to build both 2D and 3D designs. Moreover, the traditional method of building 3D models is most time-consuming as experienced operators and manual input are required. Therefore, how to minimize the building time of 3D models and provide easy-to-use functions for users who are not familiar with 3D modeling becomes important. In this paper, the VisualLISP programming language is used to create a convenient tool for efficient generation of 3D components for the AutoCAD environment. This tool will be demonstrated with the generation of a 3D sluice, an artificial passage for water fitted with a valve or gate to stop or regulate water flow. With the tool, users only need to enter the parameters of a sluice in the edit box and the 3D model will be automatically generated in a few seconds. By changing parameters in the edit box and pressing the "OK" button, a new 3D sluice model will be generated in a short while.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.44-55
• /
• 2023

The defense M&S system, which has been classified as a weapon system between requirements determination and project implementation, is being developed by applying the weapon system development procedure of the Defense Acquisition Program Administration. The M&S system abstracts and models the real world to suit the intended use and proceeds with the process of developing it as a software-oriented system. Overseas, the conceptual model development stage is staged before entering the design stage after the requirements analysis. In addition, each step includes verification and validation processes. In Korea, while establishing and applying the weapon system development procedure based on the SE process, the M&S system is also applied in the same way as the general weapon system, limiting appropriate development outputs and verification and validation. In this study, the system development procedure of the M&S system is established and presented based on the relevant standards and SE process of developed countries.