• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.901-911
• /
• 2012

The removal of security vulnerabilities during the developmental stage is found to be much more effective and much more efficient than performing the application during the operational phase. The underlying security vulnerabilities in software have become the major cause of cyber security incidents. Thus, secure coding is drawing much attention for one of its abilities includes minimizing security vulnerabilities at the source code level. Removal of security vulnerabilities at the software's developmental stage is not only effective but can also be regarded as a fundamental solution. This thesis is a research about the methods of Mobile-Secure Coding Self Assessment in order to evaluate the security levels in accordance to the application of mobile secure coding of every individual, groups, and organizations.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.283-284
• /
• 2002

투명하고, 과학적으로 소각장을 관리하기 위해서는 소각장에서 배출되는 오염물질이 주변에 미치는 기여 영향도를 정확히 계산할 필요가 있다. 이와 같은 목적으로 현재 국내에서 사용되고 있는 대기환경 영향평가용 software는 미국환경청에서 제작된 software로써 DOS상에서 구동되기 때문에 사용이 불편하고 국내 지형 및 기상조건에 부적합한 문제점을 갖고 있다. 따라서 국내 여건에 적합하고, 사용하기 용이한 Windows GUI(Graphic User Interface)에서 공동되는 평가용 software개발이 필요하다. (중략)

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.570-581
• /
• 2018

Recently, a software program has been used in nuclear power plants (NPPs) to digitalize many instrumentation and control systems. To guarantee NPP safety, the reliability of the software used in safetycritical instrumentation and control systems must be quantified and verified with proper test cases and test environment. In this study, a software testing method using a simulation-based software test bed is proposed. The test bed is developed by emulating the microprocessor architecture of the programmable logic controller used in NPP safety-critical applications and capturing its behavior at each machine instruction. The effectiveness of the proposed method is demonstrated via a case study. To represent the possible states of software input and the internal variables that contribute to generating a dedicated safety signal, the software test cases are developed in consideration of the digital characteristics of the target system and the plant dynamics. The method provides a practical way to conduct exhaustive software testing, which can prove the software to be error free and minimize the uncertainty in software reliability quantification. Compared with existing testing methods, it can effectively reduce the software testing effort by emulating the programmable logic controller behavior at the machine level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1915-1925
• /
• 1998

The switching system software is large scale, real-time multi-task system which requires high reliability. The reliability assessment of large-scale software is very important for the success of software development project. For this raeson, the software quality measurement is much more important. In this paper, we have learned about the software reliability, metho of the analysis of failure data and estimation of software quality. To estimate the software reliability, using the failure data found during of the system test. We apply the two software reliability growth models, named Goel-Okumoto(G-O) and S-shaped model, to estimate the software reliability. Also, we compared with the results and we reviewed fully not only development cycle but validation and verification of the test data, for each software versions. This paper presents a software reliability model that suitale the software development project and the activeity of quality control for the switching system.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.119-128
• /
• 2010

The application field of OSS is being expanded farther and the existing studies are well established theoretically but not actually widely used. Because so many criteria and complexity of selection methods result in low efficiency and not proper for use. In this master's thesis, to solve these problems I propose a selecting technique for OSS with less criteria, which is more effective and easy to use than before. Based on the existing studies, we identify assessment criteria which common used and redefine 14 evaluation attributes as well as 31 assessment criteria through elimination and grouping. And evaluate the criteria in four steps such as Initial assessment, Functional assessment, Characteristical assessment and Supplemental assessment. To evaluate the adequacy of suggested technique, 29 database management tools for MySQL are selected as candidates, and applied to the technique I proposed. As the result, time and effort for evaluation is reduced sharply and we can use this technique more easily.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.33-39
• /
• 2006

Home modification has come to be recognized as an important intervention strategy to manage health care conditions, maintain or improve functioning, ensure safety, and reduce the wheelchair user's dependency on others. However, the availability of skilled professionals with experience in home modifications for accessibility is limited. A system that enables accurate remote assessments would be an important tool to improve our ability to perform home assessments more easily and at decreased cost. A Remote Wheelchair Accessibility Assessment System (RWAAS) using Virtualized Reality(VR) technology was developed that enabled clinicians to assess the wheelchair accessibility of users' built environments from a remote location. Characteristics of the camera and 3D reconstruction program chosen for the system significantly affect its overall reliability. In this study, we performed two reliability analyses on the hardware and software components: 1) Verification that commercial software can construct sufficiently accurate 3D models by analyzing the accuracy of dimensional measurements in a virtualized environment; 2) comparison of dimensional measurements with four camera settings. Based on these two analyses, we were able to specify a consumer level digital camera and the Photomodeler Pro software for this system. And we then tested the feasibility of the selected software and hardware in an actual environment. Lastly, A field evaluation was performed to test whether this new system is comparable to the traditional method of accessibility assessment to evaluate its ability to assess the accessibility of a wheelchair user's typical built environment. The results of field trials showed high congruence between the assessments by two methods. Findings suggested that the RWAAS assessments have the potential to enable specialists to assess potential accessibility problems in built environments regardless of the location of the client, home, or specialist.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.346-351
• /
• 2003

In spite of the size and complexity of software becomes large and complicated, the demand of rapid development, cost reduction, good productivity and good quality software is increasing in these days. Many methods were proposed for efficient software development such as various Case tools. Metrics, Process improvement model (CMM, SPICE, ISO9000) and etc. However, most of them we useful to manage the whole projects rather than an individual programming. In this paper, we introduced a system for quality assessment and complexity metrics for Java programs to assess the individual programmer's quality rather than team's quality. This system shows not only the metrics value for quality assessment but also the source code and the soucture of classes simultaneously.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1053-1065
• /
• 2018

Objective: To evaluate the clinical impact of using registration software for ablative margin assessment on pre-radiofrequency ablation (RFA) magnetic resonance imaging (MRI) and post-RFA computed tomography (CT) compared with the conventional side-by-side MR-CT visual comparison. Materials and Methods: In this Institutional Review Board-approved prospective study, 68 patients with 88 hepatocellulcar carcinomas (HCCs) who had undergone pre-RFA MRI were enrolled. Informed consent was obtained from all patients. Pre-RFA MRI and post-RFA CT images were analyzed to evaluate the presence of a sufficient safety margin (${\geq}3mm$) in two separate sessions using either side-by-side visual comparison or non-rigid registration software. Patients with an insufficient ablative margin on either one or both methods underwent additional treatment depending on the technical feasibility and patient's condition. Then, ablative margins were re-assessed using both methods. Local tumor progression (LTP) rates were compared between the sufficient and insufficient margin groups in each method. Results: The two methods showed 14.8% (13/88) discordance in estimating sufficient ablative margins. On registration software-assisted inspection, patients with insufficient ablative margins showed a significantly higher 5-year LTP rate than those with sufficient ablative margins (66.7% vs. 27.0%, p = 0.004). However, classification by visual inspection alone did not reveal a significant difference in 5-year LTP between the two groups (28.6% vs. 30.5%, p = 0.79). Conclusion: Registration software provided better ablative margin assessment than did visual inspection in patients with HCCs who had undergone pre-RFA MRI and post-RFA CT for prediction of LTP after RFA and may provide more precise risk stratification of those who are treated with RFA.

• Journal of the Korean School Mathematics Society
• /
• v.20 no.3
• /
• pp.325-344
• /
• 2017

Since PISA2006, the computer based assessment in mathematics(CBAM) was introduced for the first times and at last PISA2015 used all items in CBAM for problem solving. In this study, we focused on which important properties were considered in constructing geometric 'fence items' used in PISA 2015 to find the future direction over our teacher education, especially for constructing 'computer based assessment items.' For the purpose of the study, we analyzed the fence items on three components such as dependency, invariant, and path found in dragging activities, within a computer environment using the dynamic Geometry Software, GSP. Also, for the future, we provided an open-ended problem related to the fence items, which we could use as the merit of computer-based environment.

• The Journal of Korean Association of Computer Education
• /
• v.23 no.4
• /
• pp.61-68
• /
• 2020

The purpose of this study is to develop a debugging task to support process-centered assessment on software(SW) education and to develop a service site. Achievement criteria for programming in elementary and middle school SW curriculum consists of control structures such as repetition and condition, and elements such as variables and input/output. In order to apply the process-centered assessment presented by the Ministry of Education, it is necessary to present tasks that can be used in the actual classroom environment and to consider connection with achievement levels. Therefore, in this study, 12 tasks for elementary school and 15 tasks for middle school were developed as debugging tasks and their validity was verified. As a result of conducting Delphi verification for validity, it was found that the level and content of the debugging task are appropriate. In addition, as a result of verifying the usability of the debugging challenge site by applying a heuristic evaluation method, it was found that it is suitable for use in the real educational field.