• 제목/요약/키워드: Software V&V

검색결과 738건 처리시간 0.03초

병원 입원 환자를 위한 낙상예방중재 효과의 비교우위: 네트워크 메타분석 (Comparative Effect of Interventions for Fall Prevention in Hospitals: Network Meta-analysis)

  • 강현욱;고지운
    • 근관절건강학회지
    • /
    • 제30권3호
    • /
    • pp.218-229
    • /
    • 2023
  • Purpose: This study aimed to assess and compare the effectiveness of various fall prevention interventions in hospitals through a network meta-analysis. Methods: A network meta-analysis was conducted using the "netmeta" package in R software (v4.1), employing a frequency method. Odds ratios of fall rates and injurious fall rates were utilized to confirm the effects of interventions for fall prevention. Comparative rankings of these interventions were determined using cumulative probability (P-score). Results: Comparative rankings via cumulative probability (P-scores) revealed individualized education as the most effective intervention for fall incidence (P-Score 87.8%). Followed by fall-preventing sensors (60.9%), multicomponent interventions (47.4%), usual care (33.2%), and environmental modification (20.7%). For fall-related injuries, individualized education ranked highest (P-Score 97.1%), followed by multicomponent interventions (76.0%), usual care (47.6%), environmental modification (24.2%), and fall-preventing sensors (5.1%). Conclusion: This study provides valuable insights into the relative effectiveness of diverse interventions in preventing fall incidence through network meta-analysis. The findings aim to support nurses in making informed decisions when implementing fall prevention strategies in clinical practice.

450 Gbps Low-cost Intensity Modulation with Direct Detection (IM/DD) Wave Length Division Multiplexing (WDM-PON) for 5G Fronthaul

  • Kawan Faiq Ahmed;Asaad Mubdir Jassim Al-Hindawi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권12호
    • /
    • pp.3310-3329
    • /
    • 2023
  • This work designs an eighteen-channel bidirectional Intensity Modulation with Direct Detection (IM/DD) Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) system. The proposed system meets the requirement of the ITU-T 5G fronthaul link suggested design in G-series Recommendations-Supplement 66. The newly designed system, with a 25Gb/s/λ data rate (450Gbps as a system capacity), has been tested and simulated using OptiSystem V.19 software. The system has been evaluated by the BER with respect to variable the optical span and CW laser power. Based on the ITU-T recommendations, the simulation results demonstrate that this system might be used as an F1 and as an Fx 5G fronthaul link for functional split choices starting from options 1 to 7a. These options are required under 25Gbps/λ for each upstream and downstream link direction. Furthermore, the proposed system utilized a bidirectional single-mode optical fiber within short optical spans of up to 10 km. The proposed system is characterized by a low-cost, simple, DSP-free and amplifier-free system with a reasonable system capacity.

TPMS 단위체의 크기, 밀도 및 배치가 혼합형 TPMS 구조의 접촉 및 유동 면적에 미치는 영향 (Effects of Dimension, Density and Arrangement of the Unit Cell of the TPMS on Contact and Flow Areas of Combined TPMS Structures)

  • 이광규;김현;안동규
    • 소성∙가공
    • /
    • 제33권4호
    • /
    • pp.248-254
    • /
    • 2024
  • The triply periodic minimal surface (TPMS) structure is characterized by a high surface-to-volume (S/V) ratio and the separated internal structure for flow. Combining the different TPMS structures can provide unique flow and strength characteristics. This paper investigates the effects of dimension, density and arrangement of the unit cell of the TPMS on contact and flow areas of combined TPMS structures. Several representative TPMS structures, including primitive, gyroid and diamond structures, are adopted to design gradient and heterogeneous types TPMS structures. The estimation method of contact and flow areas using an image processing technique is proposed. Python software is used to predict contact and flow area. The influence of the combination method of TPMS on contact and flow areas in the contact surface of combined TPMS structures with different shapes is investigated. Based on the results of the investigation, an appropriate combination method of TPMS structures is discussed.

18F-FDG Brain PET/CT 검사를 위한 데이터 비교 방법의 평가 (Evaluation of Database Comparison Methods for 18F-FDG Brain PET/CT)

  • 도용호;이홍재;김진의
    • 핵의학기술
    • /
    • 제19권1호
    • /
    • pp.62-66
    • /
    • 2015
  • Brain PET/CT 검사는 뇌의 정신활동 뿐만 아니라 혈액의 관류상태, 에너지원의 대사상태, 생리적 활성물질의 섭취 정도를 관찰할 수 있으며 이를 통계적으로 분석하기 위한 다양한 데이터 비교 방법들이 적용되고 있다. 본 논문에서는 다양한 데이터 비교 방법들 중 SPM과 scenium의 유용성을 비교 평가 하였다. 2014년 3월부터 7월까지 서울대학교병원에서 18F-FDG PET/CT 검사를 시행 받은 15명(평균연령 $62.02{\pm}15.03$세, abnormal 10명, normal 5명)의 데이터를 분석하였다. 사용된 장비는 Siemens사의 Biograph Truepoint40 with TrueV이며 데이터 분석을 위하여 SPM99, syngo.via version VA30A, scenium version 4.0이 사용되었다. 검사는 $^{18}F-FDG$를 kg당 3.7MBq 주사하여 30분 후 brain emission 영상을 10분 획득하였다. 획득된 영상을 이용하여 영상 판독과 SPM, scenium 결과의 일치성을 5명의 핵의학과 판독의가 평가하였다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화를 평가하기 위하여 환자 data 재구성시 iteration 4, 6, 8, gaussian filter 2mm, 4mm, 8mm, matrix size 168, 256, 336의 변화를 주어 재구성후 증감을 평가하였다. 마지막으로 3명의 방사선사가 두 software를 이용하여 평균 결과 분석 시간을 평가하였다. 영상 판독과 SPM 결과의 일치성은 normal 89.5%, abnormal 73.2%로 normal 환자에서 보다 높은 일치성을 보였으며 total 84.1%의 일치하는 것으로 나타났다. Scenium에서는 normal 92.1%, abnormal 93.0% 그리고 total 92.4%로 나타났다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화 평가에서 iteration 횟수와 matrix size가 감소할수록 SUV와 SD 값은 iteration 변화에서 최대 0.59%, 8.73% 그리고 matrix size 변화에서 최대 0.88%, 8.25% 감소하였다. Gaussian filter변화에서는 FWHM이 증가할수록 SUV와 SD값은 최대 4.69%, 20.38% 감소하였다. 두 software를 이용한 평균 결과 분석 시간은 SPM 282초, scenium 116초로 scenium으로 결과 분석 시 SPM 사용 시 보다 58.% 시간이 감소되었다. 데이터 비교 평가 software들의 장단점을 충분히 이해하고 각 병원의 장비 환경과 실정에 맞는 software를 적용한다면 brain PET/CT 검사 시 보다 많은 정보를 제공할 수 있을 것으로 사료된다.

  • PDF

통신해양기상위성 전력계 예비설계 (COMS Electrical Power Subsystem Preliminary Design)

  • 구자춘;김의찬
    • 한국위성정보통신학회논문지
    • /
    • 제1권2호
    • /
    • pp.95-100
    • /
    • 2006
  • 통신해양기상위성의 전력계는 향상된 Eurostar 3000 버전에 바탕을 두고 있다. Eurostar 3000 전력계는 정상상태 또는 하나의 결함에서도 자율적으로 동작하며 높은 수준의 재구성 능력 및 유연성을 제공한다. 본 논문에서는 통신해양기상위성 전력계 예비설계 결과를 소개한다. 통신해양기상위성 전력계는 하나의 배터리, 태양전지어레이 윙, 전력공급기, 파이로 유닛 및 태양전지어레이 구동기 그리고 릴레이 및 퓨즈 브래킷 들로 구성된다. 통신해양기상위성 전력계는 3 kW의 버스 전력을 제공할 수 있다. 태양전지어레이는 2개의 태양전지판으로 구성된 전개할 수 있는 윙으로 구성된다. 태양전지는 GaAs/Ge 3중 접합 셀로 선정되었다. Li-ion 배터리는 10개의 직렬 연결된 셀 모듈로 구성되며 각 모듈은 셀 5개가 병렬로 연결된다. 전력공급기는 태양전지어레이 및 배터리와 함께 50 V로 완전 정류된 하나의 전력 버스를 생성한다. 전력 버스는 릴레이 및 퓨즈 브래킷 들에 의해 중앙 집중되어 보호되고 분배된다. 파이로 유닛은 점화 작동기 장치로 전력을 공급한다. 태양전지어레이는 자세제어계의 제어로 태양전지어레이 구동기에 의해 회전된다. 전력계의 제어 및 감시는, 특히 배터리, 전력공급기와 탑재 소프트웨어의 결합으로 수행된다.

  • PDF

행성 근접통과를 이용한 행성간 탐사선의 궤도 설계에 관한 연구

  • 송영주;유성문;박은서;박상영;최규홍;윤재철;김방엽;김병교;최준민
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2003년도 한국우주과학회보 제12권2호
    • /
    • pp.50-50
    • /
    • 2003
  • 본 연구에서는 행성 근접통과(Gravity Assist, Swingby, Flyby)를 이용한 행성간 탐사선의 궤도를 설계할 수 있는 알고리즘 개발을 자체적으로 수행하였다. 미 항공우주국(NASA)에서는 이를 이용한 행성간 탐사선의 궤도에 관한 연구를 이미 1950년대부터 시작하여 왔으며, 1973년 Mariner 10호가 한번에 두 행성, 금성과 수성을 탐사하는데 성공하였다. 행성간 임무에 있어서 행성 근접통과를 적절하게 이용한다면 임무 수행시 요구되는 에너지를 최소화 시킬 수 있어 발사비용의 절감효과와 함께 한번의 발사로 여러 행성의 탐사가 가능하여 임무의 효율성을 증대 시킬 수 있다. 행성 근접통과를 이용한 행성 탐사선의 궤도설계를 위해서는 근접 통과하는 행성(Flyby planet)에서의 진입속도벡터( $V_{\infty}$$^{ -}$) 및 출발속도벡터( $V_{\infty}$$^{+}$)의 크기, 근접 통과시의 비행 고도(Flyby altitude), 근접 통과 행성과의 충돌여부 분석(B-plane analysis), 최종적으로 도착하고자 하는 행성(Target planet)의 위치 등 많은 제한조건이 고려되어야 한다. 연구된 알고리즘의 결과를 미 항공우주국 (NASA)의 임무였던 Mariner 10호의 결과와 비교하여 보았으며, 우리나라가 향후 목성으로 탐사선을 보낸다고 가정하였을 경우, 행성 근접통과를 이용한 탐사선의 발사시기(Launch Window), 요구되는 발사 에너지(C3)값, 그리고 각각에 따른 궤적들을 산출하여 보았다. 이미 기술 개발을 완료한 국가들이 관련 기술의 제휴를 기피하고 있는 현 상황에서 이와 관련된 연구는 우주개발의 시대를 열고 있는 우리나라의 우주개발관련 기초 기술 분야를 위해 선행 연구되어야 할 부분이다. 기초 기술 분야를 위해 선행 연구되어야 할 부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$$\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하

  • PDF

소아 환자의 치수 혈류 평가를 위한 광용적맥파 파형 분석 (Analysis of Photoplethysmographic Waveform for Assessment of Pulpal Blood Flow in Children)

  • 김효은;신터전;공현중;김필종;현홍근;김영재;김정욱;장기택;김종철;이상훈
    • 대한소아치과학회지
    • /
    • 제43권2호
    • /
    • pp.158-165
    • /
    • 2016
  • 본 연구는 맥박산소측정기를 이용하여 광용적맥파 파형의 원데이터를 기록하고 분석함으로써 치수 생활력 측정에 이 원데이터 분석의 적용가능성을 살펴보고 정상 치수 생활력을 갖는 소아환자의 상악 중절치에 대한 광용적맥파 파형의 파라미터에 대한 기초 자료를 마련할 목적으로 시행되었다. 상악 중절치에 대해 정상 치수 생활력을 갖고 전신질환이 없는 30명의 환아(남 16명, 여 14명, 평균연령 11.4세)를 연구대상으로 선정하였다. 맞춤형 센서와 맥박산소측정기를 이용하여 측정하였으며 측정결과는 적색 파장과 적외선 파장의 원데이터 형태로 기록되었고 LabChart(v.7.3, ADInstruments, Germany)를 이용하여 분석하였다. 본 연구를 통해 소아에서 정상 치수생활력을 갖는 상악 중절치에 대한 광용적맥파 파형의 파라미터의 기준값을 제시할 수 있었으며 소아의 치수혈류측정에 이러한 광용적맥파 파형 분석이 활용될 수 있음을 확인하였다.

Comparative analysis of the microbial communities in raw milk produced in different regions of Korea

  • Kim, In Seon;Hur, Yoo Kyung;Kim, Eun Ji;Ahn, Young-Tae;Kim, Jong Geun;Choi, Yun-Jaie;Huh, Chul Sung
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권11호
    • /
    • pp.1643-1650
    • /
    • 2017
  • Objective: The control of psychrotrophic bacteria causing milk spoilage and illness due to toxic compounds is an important issue in the dairy industry. In South Korea, Gangwon-do province is one of the coldest terrains in which eighty percent of the area is mountainous regions, and mainly plays an important role in the agriculture and dairy industries. The purposes of this study were to analyze the indigenous microbiota of raw milk in Gangwon-do and accurately investigate a putative microbial group causing deterioration in milk quality. Methods: We collected raw milk from the bulk tank of 18 dairy farms in the Hoengseong and Pyeongchang regions of Gangwon-do. Milk components were analyzed and the number of viable bacteria was confirmed. The V3 and V4 regions of 16S rRNA gene were amplified and sequenced on an Illumina Miseq platform. Sequences were then assigned to operational taxonomic units, followed by the selection of representative sequences using the QIIME software package. Results: The milk samples from Pyeongchang were higher in fat, protein, lactose, total solid, and solid non-fat, and bacterial cell counts were observed only for the Hoengseong samples. The phylum Proteobacteria was detected most frequently in both the Hoengseong and Pyeongchang samples, followed by the phyla Firmicutes and Actinobacteria. Notably, Corynebacterium, Pediococcus, Macrococcus, and Acinetobacter were significantly different from two regions. Conclusion: Although the predominant phylum in raw milk is same, the abundances of major genera in milk samples were different between Hoengseong and Pyeongchang. We assumed that these differences are caused by regional dissimilar farming environments such as soil, forage, and dairy farming equipment so that the quality of milk raw milk from Pyeongchang is higher than that of Hoengseong. These results could provide the crucial information for identifying the microbiota in raw milk of South Korea.

Dosimetric Effects of Intrafractional Organ Motion in Field-in-Field Technique for Whole-Breast Irradiation

  • Hong, Chae-Seon;Ju, Sang Gyu;Choi, Doo Ho;Han, Youngyih;Huh, Seung Jae;Park, Won;Ahn, Yong Chan;Kim, Jin Sung;Lim, Do Hoon
    • 한국의학물리학회지:의학물리
    • /
    • 제30권3호
    • /
    • pp.65-73
    • /
    • 2019
  • Purpose: We evaluated the motion-induced dosimetric effects on the field-in-field (FIF) technique for whole-breast irradiation (WBI) using actual patient organ motion data obtained from cine electronic portal imaging device (cine EPID) images during treatment. Materials and Methods: Ten breast cancer patients who received WBI after breast-conserving surgery were selected. The static FIF (SFIF) plan involved the application of two parallel opposing tangential and boost FIFs. To obtain the amplitude of the internal organ motion during treatment, cine EPID images were acquired five times for each patient. The outside contour of the breast (OCB) and chest wall (CW) contour were tracked using in-house motion analysis software. Intrafractional organ motion was analyzed. The dynamic FIF (DFIF) reflecting intrafractional organ motion incorporated into the SFIF plan was calculated and compared with the SFIF in terms of the dose homogeneity index (DHI90/10) for the target and V20 for the ipsilateral lung. Results: The average motion amplitudes along the X and Y directions were 1.84±1.09 mm and 0.69±0.50 mm for OCB and 1.88±1.07 mm and 1.66±1.49 mm for CW, respectively. The maximum motion amplitudes along the X and Y directions were 5.53 and 2.08 mm for OCB and 5.22 and 6.79 mm for CW, respectively. Significant differences in DHI90/10 values were observed between SFIF and DFIF (0.94 vs 0.95, P<0.05) in statistical analysis. The average V20 for the lung in the DFIF was slightly higher than that of the SFIF in statistical analysis (19.21 vs 19.00, P<0.05). Conclusion: Our findings indicate that the FIF technique can form a safe and effective treatment method for WBI. Regular monitoring using cine EPID images can be effective in reducing motion-induced dosimetric errors.

신호교차로 영향에 따른 도시고속도로 유출연결로 최소이격거리에 관한 연구 (Determination of Minimum Spacing between Off-ramp Terminus and Intersection Considering the Influence of Adjacent Signalized Intersections)

  • 김상구;심대영;허두완
    • 대한교통학회지
    • /
    • 제25권4호
    • /
    • pp.79-87
    • /
    • 2007
  • 도시고속도로의 인터체인지는 대규모의 유출교통량과 인접교차로의 잦은 지정체로 인하여 교통운영상 많은 문제점을 내포하는 지점으로 알려져 있다. 도시부 고속도로의 인터체인지에서 분류된 유출교통류는 가장 가까운 인접 신호교차로의 운영상태 및 교통량상태에 의해서 영향을 받게 된다. 이러한 인접교차로의 영향으로는 인접가로의 대기행렬이 유출연결로의 가로접속부까지 형성되었을 경우, 유출교통량이 인접가로로 진입하지 못하고 유출연결로상에 대기행렬을 형성하여 정체가 심해지면 고속도로 본선에까지 영향을 미치게 된다. 이러한 문제로 인해 유출연결로와 접속되는 인접가로의 위치가 주변 교차로의 교통류 상태에 중요한 변수로 작용하게 되는데 현재 설계기준으로는 이러한 영향까지 고려한 기준을 제시하지 못하고 있는 실정이다. 본 연구는 인접교차로의 운영에 대한 영향을 고려하여 인접교차로에서 유출연결로까지의 간격을 구하는 모형식을 개발하고자 한다. 인접교차로로 인해 유출연결로의 교통류에 영향을 미치는 변수로는 유효녹색비(g/C), v/c비(교통량 대 용량비), 가로차로수와 유출연결로교통량이 선정되었다. 이러한 변수들에 대한 영향을 반영하고자 시뮬레이션 프로그램(VISSIM)을 이용하여 도로망을 구축하고 변수들의 다양한 조건을 반영한 시나리오를 작성하였다. 각 시나리오별로 구성된 교통, 도로, 신호조건을 반영한 인접가로의 대기행렬길이를 시뮬레이션하여 결정하고, 이러한 대기행렬길이가 인접교차로와 유출연결로 접속부와의 간격을 결정하는 중요한 기준치로 사용되었다. 시뮬레이션 분석결과, 시나리오별로 다양한 대기행렬길이가 산정되었고 사용된 변수와 대기행렬길이를 이용하여 회귀모형식을 개발하였다. 개발된 회귀모형식은 인터체인지의 계획 및 설계시 인접교차로와의 관계를 고려하여 유출연결로의 위치를 결정하는 설계기준에 반영할 수 있을 것이고, 이로 인해 향후 인터체인지 주변의 교차로 운영과 고속도로 본선 교통류의 효율적 관리에 기여할 것으로 기대된다.