• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.261-266
• /
• 2002

CAE technology is an integrated tool including all aspects such as powder, binder system, mixing, injection molding, debinding and sintering. Therefore, CAE technology is considered as one of core technologies for PIM industry in the future. Recently many researchers are developing not only CAE software itself but also application procedures of CAE software. In this study, the applications for CAE technology in PIM industry are presented including feedstock mixing effect, several cases of troubleshooting and optimization procedure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권3호
• /
• pp.99-105
• /
• 2014

A graphic processing unit (GPU) can perform the same calculation on multiple data (SIMD: single instruction multiple data) using hundreds of to thousands of special purpose processors for graphic processing. Thus, high efficiency is expected when GPU is used for the generation and correlation of satellite navigation signals, which perform generation and processing by applying the same calculation procedure to tens of millions of discrete signal samples per second. In this study, the structure of a GPU-based GNSS simulator for the generation and processing of satellite navigation signals was designed, developed, and verified. To verify the developed satellite navigation signal generator, generated signals were applied to the OEM-V3 receiver of Novatel Inc., and the measured values were examined. To verify the satellite navigation signal processor, the performance was examined by collecting and processing actual GNSS intermediate frequency signals. The results of the verification indicated that satellite navigation signals could be generated and processed in real time using two GPUs.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.35-40
• /
• 2019

In this paper, we propose a technique to reconstruct the iris image from the iris code by analyzing the process of generating the iris code and calculating it inversely. Iris recognition is an authentication method for authenticating an individual's identity by using iris information of an eye having unique information of an individual. The iris recognition extracts the features of the iris from the iris image, creates the iris code, and determines whether to authenticate using the corresponding code. The iris recognition method using the iris code is a method proposed by Daugman for the first time and is widely used as a representative method of iris recognition technology currently used commercially. In this paper, we restore the iris image with only the iris code, and test whether the reconstructed image and the original image can be recognized, and analyze restoration vulnerability of Daugman's iris code.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 추계학술발표대회
• /
• pp.1004-1007
• /
• 2008

2007년 구글에서 공개된 안드로이드는 개방형 모바일 플랫폼으로 모바일 장치를 목표로 한다. 안드로이드 플랫폼은 다양한 모바일 제품에 적용 할 수 있는 구조로 되어 있어 확장이 용이하며 향후 다양한 모바일 장치에 사용될 것으로 생각된다. 이러한 발전성을 고려하여 선행연구 차원에서 연구 될 가치가 충분하다고 판단이 된다. 본 논문에서는 안드로이드 플랫폼에 대표적 홈네트워크 미들웨어인 UPnP와 DLNA에서 명시하는 UPnP for A/V에 준하는 스택을 구현하여 UPnP를 통한 장치들을 검색 및 제어를 하고 DLNA에 준하여 디지털 콘텐츠를 공유, 전송 한다. 또한 안드로이드 플랫폼과 디지털 액자간의 네트워킹을 통해 홈네트워크 플랫폼으로서의 안드로이드 가능성을 확인한다.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.165-185
• /
• 2015

The suspended zipper bracing system is suggested to reduce the flaws of ordinary zipper braced and concentric inverted V braced frames. In the design procedure of suspended zipper bracing systems, columns and top story truss elements are strengthened. This bracing system show different performances and characteristics compared with inverted V braced and ordinary zipper frames. As a result, a different response modification factor for suspend zipper frames is needed. In this research paper, the response modification factor of suspended zipper frames was obtained using the incremental dynamic analysis. Suspended zipper braced frames with different stories and bay lengths were selected to be representations of the design space. To analyze the frames, a number of models were constructed and calibrated using experimental data. These archetype models were subjected to 44 earthquake records of the FEMA-P695 project data set. The incremental dynamic analysis and elastic dynamic analysis were carried out to determine the yield base shear value and elastic base shear value of archetype models using the OpenSEES software. The seismic response modification factor for each frame was calculated separately and the values of 9.5 and 13.6 were recommended for ultimate limit state and allowable stress design methods, respectively.

• 한국지열·수열에너지학회논문집
• /
• 제16권1호
• /
• pp.17-25
• /
• 2020

Ground-coupled heat pump (GCHP) systems have become an efficient alternative to conventional cooling and heating methods due to their higher energy using efficiency. Although some experimental and simulation works related to performance analysis of GCHP systems for commercial buildings have been done, relatively little has been reported on the performance evaluation of GCHP systems for school buildings. The purpose of this simulation study is to evaluate the performance of a hypothetical GCHP system for a school building in Seoul. We collected various data of building specifications and construction materials for the building and then modeled to calculate hourly building loads with SketchuUp and TRNSYS V17. In addition, we used GLD (Ground Loop Design) V2016, a GCHP system design and simulation software, to design the GCHP system for the building and to simulate temperature of circulating water in ground heat exchanger. The variation of entering source temperature (EST) into the system was calculated with different prediction time and then each result was compared. For 20 years of prediction time, EST for baseline design (Case A) based on the hourly simulation results were outranged from the design criteria.

• 한국통신학회논문지
• /
• 제24권7B호
• /
• pp.1342-1350
• /
• 1999

본 논문에서는 2.45GHz 비접촉식 마이크로파 무선인식시스템을 개발하고 특성을 분석하였다. 응답기와 질문기 사이에 9,600bps 전송속도로 데이터 인식을 통하여 통신절차와 에러검출 보정방식 및 송.수신회로 범용소자를 이용하여 설계.제작하였고, 송.수신안테나와 응답기 전원제어를 위한 제어 프로토콜을 추가하여 시스템의 신뢰성을 향상시켰다. 실험결과, 응답기는 3.6V의 전원 공급시 15$\mu\textrm{A}$의 저전류 소모를 보였으며 최대, 80km/h의 이동속도에 대한 데이터 전송 성공률은 초대 인식거리 10m에서 90%이상의 결과를 얻었다.

• Journal of Astronomy and Space Sciences
• /
• 제8권1호
• /
• pp.99-113
• /
• 1991

수치적인 방법을 이용하여 인공위성의 궤도를 예보할 수 있는 소프트웨어 시스템 (IODS: ISSA Orbit Determination System)을 개발하였다. IODS의 궤도예보 정확도틀 평가하기 위히여 기상위성 NOAA-ll호와 정지위생 INTELSAT-V의 궤도를 예보하였고, 그 결과를 중앙기상대와 금산 위생통신지구국의 위성추적 자료와 비교하였다. 그리고 인공위성애 미치는 여러가지 섭동력을 정량적으로 분석하였다 한편, 동경 100도에 상공에 위치한 정지위성(KORSAT-l)의 궤도을 가정하여 궤도가 시간에 따라 변하는 양상을 IODS툴 이용하여 분석하였으며, KORSAT-l이 지구의 그림자에 들어가는 식현상을 예측하고 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.255-262
• /
• 2011

This paper proposes a grid-tied power conditioning system for fuel cell, which consists of three-phase current-fed DC-DC converter and three-phase PWM inverter. The three-phase current-fed DC-DC converter boosts fuel cell voltage of 26-48 V up to 400 V with zero-voltage switching (ZVS) scheme, while the three-phase PWM(Pulse Width Modulation) inverter controls the active and reactive power supplied to the grid. The operation of the proposed power conditioning system with fuel cell model is verified through simulations with PSCAD/EMTDC software. The feasibility of hardware implementation is verified through experimental works with a laboratory prototype with 1.2 kW proton exchange membrane (PEM) fuel cell stack. The proposed power conditioning system can be commercialized to interconnect the fuel cell with the power grid.