• 정보기술응용연구
• /
• 제3권3호
• /
• pp.91-106
• /
• 2001

본 논문에서는 소프트웨어 테스트 단계중에 발생되는 테스트노력 소요량을 고려한 소프트웨어 신뢰도 성장 모델을 제시하여 시간종속적인 테스트 노력소요량 동태를 일정 테스트 노력일 때와 웨이불 테스트 노력일 때를 비교하여 연구한다. 테스트 단계중에 소요되는 테스트 노력의 양에 대한 결함 검출비를 현재의 결함 내용에 비례하는 것으로 가정하여 모델을 비동차 포아송 과정으로 공식화하며, 이 모델을 이용하여 소프트웨어 신뢰도 척도에 대한 데이터 분석기법을 개발하도록 한다. 테스트 시간의 경과와 신뢰도와의 관계도 심도 있게 연구한다. 목표신뢰도를 만족시키는 최적발행시각을 정한다. 개발 후 테스트를 시작하기 전의 신뢰도가 어떠한 조건에 있는가를 검토하여 각 조건에 따른 최저 발행시각을 결정한다. 일정 테스트 노력 곡선과 웨이불 테스트 노력 곡선 모두에 대해서 그 조건은 목표 신뢰도를 초과하는 경우, 목표신뢰도를 초과하지는 못하지만 어느 조건 이상인 경우, 어느 조건 이하인 경우로 대별되며, 이 중에서 이상적인 경우는 두 번째 조건인 경우이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2005

This paper is concerned with the precision material property measurement of a micro metal thin foil that is used in MEMS technology. Since these MEMS components require great precision and accuracy, evaluation of reliability such as the lift cycle endurance test, impact test, and residual stress test is necessary for these components. However, in practice, real reliability tests are not easy to perform due to consideration of various factors. Rather than actual testing, it would be much easier to evaluate the reliability of components by the analytical approach. Although the analytical method is utilized by software tools, it is obviously necessary to acquire fundamental properties of materials through real test methods. In this paper, the oriented mechanical properties of aluminum thin foil are measured by nano scale material property measurement system.

• 유통과학연구
• /
• 제16권12호
• /
• pp.81-93
• /
• 2018

Purpose - The purpose of this study was to propose a specific and empirical continuous transaction strategy through service quality of improvement to small and medium Korean companies whose main business is B2B distribution and sale of general-purpose SW. Research design, data, and methodology - The research procedure is largely divided into two phases. In the first phase, the service quality, the customer satisfaction, and the continuous transaction research hypothesis and the verification are carried out. Experimental data were collected from 450 companies, CEO companies of SMEs innovation institutes, and 510 companies from medium and large enterprises. From September 15 to October 5, 2015, 215 questionnaires were used. And research hypothesis and test were conducted by SPSS SW Ver. 20. Results - The results of the study confirm that service quality has a positive effect on customer satisfaction and continuous transaction: as the detailed items for improving the service quality, 'responsiveness', 'assurance' and 'empathy' have been adopted. Therefore, there are critical factors of a company's survival through continuous transaction. Conclusions - Through this study, we confirmed that the survival of small businesses require continuous improvement in service quality. Among the factors improving service quality, empathy means service satisfaction of customers; so, it is necessary to continuously improve it by evaluating customer satisfaction. Responsiveness means rapid response to customer needs and reliability; it is necessary to enhance customer responsiveness by continuous job training and service training. Finally, assurance is the same as sales product or after service. This means that it is necessary to not only issue the "supply contract," but also improve the reliability of the sales product by securing the competence of the consulting professional. However, because the service quality measurement factors selected in this study are the measurement factors that are mainly applied to large companies or those in the service industries, it is important to consider the type of sales of software distribution companies.

• 대한족부족관절학회지
• /
• 제17권1호
• /
• pp.40-44
• /
• 2013

Purpose: To study inter- and intra-observer reliabilities of computerized measurements of the angular parameters of hallux valgus deformity, using two different kinds of software tools for angle measurement on the digital radiography. Materials and Methods: On 35 digital radiographies of standing foot anteroposterior view of hallux valgus, two observers (A, B) independently measured hallux valgus angle (HVA) and 1-2 intermetatarsal angle ($IMA_{1-2}$) twice, using two methods. In method I, an angle was determined from duplicated lines to longitudinal axes made for bisecting line on the target bones with software tool. In method II, an angle was calculated automatically and directly from bisecting lines (longitudinal axes) made on the target bones. We compared two methods using paired t-test to determine significance of differences. Inter- and intraobserver reliabilities were evaluated using the intraclass correlation coefficients (ICC). Results: There were no significant differences between measurements of method I and II for each observer (p>0.05) and intraobserver reliability were good. (ICC>0.9) Inter-observer reliability for method I and II was good of the HVA (ICCs, 0.912 and 0.905) and moderate of the $IMA_{1-2}$ (ICCs, 0.505 and 0.537). There were interobserver differences in HVA of method I and II. Conclusion: No significant difference was found statistically between measurements of method I and II. Both methods I and II would be acceptable to measure angular parameters of hallux valgus deformity.

• 한국치위생학회지
• /
• 제22권2호
• /
• pp.133-142
• /
• 2022

Objectives: This study was conducted by clinical dentistry hygienists to develop knowledge measurement tools and evaluate knowledge necessary to cope with emergencies related to systemic diseases occurring in dentistry. Methods: Basic questions were developed on the six most frequently occurring diseases in the dental office: diabetes, syncope, respiratory disease, coronary artery disease, cerebrovascular disease, and epilepsy. Fifty-eight preliminary questions were composed in a survey format through expert validation. The survey was then conducted on 290 dental hygienists to verify the composition validity and reliability. Factor and reliability analyses were performed using the SPSS 23.0 program, and the correct answer rate for each question was calculated. Results: 49 items of a total of 13 factors were adopted as the final items for signs, symptoms, prevention and treatment of five diseases. The question with the highest percentage of correct answers for each question was "Slowly set up the unit chair when raising the patient"(97.9%) during the prevention of unconsciousness and question with the lowest correct answer rate was "soft substances such as cloth should be put in the mouth to prevent trauma while the seizure persists" (16.6%). Conclusions: A total of 49 questions have been developed as tools to measure the knowledge of dental hygienists' first aid related to systemic diseases and it is expected that related curriculum can be operated or evaluated by using them.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1128-1133
• /
• 2006

The most important thing to secure safety and reliability of railway vehicles is to verify performance characteristics of equipments, and related companies or research institutes had many efforts to verify performances and functions of equipments synthetically and efficiently. KHST(Korean High Speed Train) has been developed by KRRI (Korea Railroad Research Institute). An electric railway system is composed of high-tech subsystems, among which main electric equipment such as transformers and converter are critical components determining the performance of rolling stock. We developed a measurement system for on-line test and evaluation of performances of KHST. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. A new method to measure temperature was applied to the ]measurement system. By using the system, fault diagnosis and performance evaluation of electric equipment in Korean High Speed Train was conducted during test running.

• International Journal of Computer Science & Network Security
• /
• 제23권3호
• /
• pp.130-138
• /
• 2023

The Smart grids are considered as multi-disciplinary power systems where the communication networks are highly employed. This paper presents optimal wide area measurement system (WAMS) configuration in Nordic power system. The transition from SCADA to WAMS becomes now trend in all power systems to ensure higher reliability and data visibility. The optimization applied in this research considered the geographical regions of the Nordic power system. The research considered all the devices of WAMS namely phasor measurement units (PMUs), phasor data concentrators (PDCs) and communication links. The study also presents two scenarios for optimal WAMS namely base case and N-1 contingency as different operating conditions. The result of this research presents technical and financial results for WAMS configuration in a real power system. The optimization results are performed using MATLAB 2017a software application.

• International Journal of Computer Science & Network Security
• /
• 제23권12호
• /
• pp.187-193
• /
• 2023

Large software systems are being produced with a noticeably higher level of quality with component-based software engineering (CBSE), which places a strong emphasis on breaking down engineered systems into logical or functional components with clearly defined interfaces for inter-component communication. The component-based software engineering is applicable for the commercial products of open-source software. Software metrics play a major role in application development which improves the quantitative measurement of analyzing, scheduling, and reiterating the software module. This methodology will provide an improved result in the process, of better quality and higher usage of software development. The major concern is about the software complexity which is focused on the development and deployment of software. Software metrics will provide an accurate result of software quality, risk, reliability, functionality, and reusability of the component. The proposed metrics are used to assess many aspects of the process, including efficiency, reusability, product interaction, and process complexity. The details description of the various software quality metrics that may be found in the literature on software engineering. In this study, it is explored the advantages and disadvantages of the various software metrics. The topic of component-based software engineering is discussed in this paper along with metrics for software quality, object-oriented metrics, and improved performance.

• 재활치료과학
• /
• 제12권1호
• /
• pp.79-92
• /
• 2023

목적 : 본 연구는 손목과 손가락 관절가동범위 측정에 대한 3차원 동작분석 프로그램의 신뢰도를 알아보고자 하였다. 연구방법 : 연구 대상자는 정상인으로 손목과 손가락의 움직임에 제한이 없는 자, 본 연구의 목적을 이해하고 참여에 동의한 자 50명을 대상으로 하였다. 측각기와 3차원 동작분석 프로그램을 사용하여 총 11항목의 손목과 손가락 관절가동범위를 각각 1회씩 측정하였다. 3차원 동작분석 프로그램의 신뢰도를 측정하기 위해 측정값의 일치도와 불일치 양상을 비교하였다. 결과 : 측정값의 일치도를 분석한 결과 44개의 항목 중 38개 측정항목에서 매우 높은 일치도를 보였으며, 측정값의 불일치 양상을 분석한 결과 3가지 항목에서 불일치 양상이 나타났다. 결론 : 본 연구 결과를 통해 본 연구에서 사용한 3차원 동작분석 프로그램을 통해 관절가동범위 측정이 가능함을 알 수 있었다. 또한 3차원 동작분석 프로그램의 측정의 편리성, 정확성의 장점을 기반으로 다양한 임상 분야에서 활용되기를 기대한다.