• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1215-1220
• /
• 2003

People's Republic of China is one of the most rapidly developing countries in the world today. There is a great demand on highly actual and accurate spatial information of the whole country, especially of West China which becomes the focus of development of the Chinese government right now and in the next years, but where still not enough topographic maps are available. This raises great challenges to the surveying and mapping community in China. Facing the new challenges the Chinese Academy of Surveying and Mapping (CASM) started its pioneer work early 2002 to explore new techniques and technologies available today toward increasing the map productivity. With import of a CCNS/AEROcontrol system in November 2002 the first DGPS/IMU-based photogrammetric project in China was successfully accomplished jointly by CASM and the Germany-based companies IGI and Techedge. Two photogrammetric blocks of 1:4,000 and 1:20,000 photo scale, respectively, were flown in Anyang, China. Direct georeferencing and integrated sensor orientation were conducted. Results achieved were proven by using ground check points and compared with those of aerial triangulation. Orthophotos generated based on direct georeferencing shows the high efficiency and quality, and thus proved the promise of the new technology. Furthermore several DGPS/IMU-based photogammetric projects was accomplished one by one and a big project of more than 100,000 km2 in the Inner Mongolia will be started in August 2003. The paper presents experiences with DGPS/IMU-based photogrammetry in China. Results achieved in concrete projects are shown and evaluated. Politic and technical specialties in China are discussed. Conclusions outline the potential of DGPS/IMU-based photogrammetric production in China.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.163-170
• /
• 2008

As the degree of dependency and application of component increases, the need to strengthen security of component is also increased as well. The component gives an advantage to improve development productivity through its reusable software. Even with this advantage, vulnerability of component security limits its reuse. When the security level of a component is raised in order to improve this problem, the most problematic issue will be that it may extend its limitation on reusability. Therefore, a component model concerning its reusability and security at the same time should be supplied. We suggest a Separation of Concerns Security Model for Extension of Component Reuse which is integrated with a wrapper model and an aspect model and combined with a reuse model in order to extend its security and reusability by supplying information hiding and easy modification, and an appropriate application system to verify the model's compatibility is even constructed. This application model gives the extension of component function and easy modification through the separation of conceits, and it raise its security as doll as extends its reusability.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.1
• /
• pp.387-394
• /
• 2019

Recently, the importance of big data has been increased, and demand for data analysis for the big data is also increased. R language is developed for data analysis, and users are analyzing data by using algorithms of various statistics, machine learning and data mining packages in R language. However, it is difficult to develop an application using R. Early study proposed a method to call R script through another language such as PHP, Java, and so on. However, it is troublesome to write such a development method in addition to R in combination with other languages. In this study, we introduce how to write API using only R language without using another language by using Plumber package. We also propose a solution for security issues related with R API. If we use propose technology for developing web application, we can expect high productivity, easy of use, and easy of maintenance.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.108-122
• /
• 2021

With the development of 3D graphics software and the speed of computer hardware, it is an era that can be realistically expressed not only in movie visual effects but also in console games. In the production of such realistic 3D models, 3D scans are increasingly used because they can obtain hyper-realistic results with relatively little effort. Among the various 3D scanning methods, photogrammetry can be used only with a camera. Therefore, no additional hardware is required, so its demand is rapidly increasing. Most 3D artists shoot as many images as possible with a video camera, etc., and then calculate using all of those images. Therefore, the photogrammetry method is recognized as a task that requires a lot of memory and long hardware operation. However, research on how to obtain precise results with 3D photogrammetry scans is insufficient, and a large number of photos is being utilized, which leads to increased production time and data capacity and decreased productivity. In this study, point cloud data generated according to changes in the number and resolution of photographic images were produced, and an experiment was conducted to compare them with original data. Then, the precision was measured using the average distance value and standard deviation of each vertex of the point cloud. By comparing and analyzing the difference in the precision of the 3D photogrammetry scans according to the number and resolution of images, this paper presents a direction for obtaining the most precise and effective results to 3D artists.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.219-225
• /
• 2022

The textile industry in Korea, the dyeing sector is an energy-intensive sector and has low per-unit productivity due to its labor-intensive nature. If the defective rate of dyed fabrics is high, additional costs are incurred due to an increase in production cost due to re-dyeing. Therefore, the goal of the dyeing factory was to minimize the defect rate rather than to save energy. It was difficult to check the dyeing state of the fabric in real time due to the risk of accidents due to burns or pressure when dyeing in a high-temperature and high-pressure environment. In this paper, a complex sensor that can measure the exhaustion rate of dye solution in the dyeing machine using turbidity, pH, and conductivity sensors was proposed, and the experimental method and experimental results were analyzed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.60-69
• /
• 2022

To keep pace with Industry 4.0, it is imperative for companies to redesign their working environments by adopting robotic automation systems. Automation lines are facilitating the latest cutting-edge technologies, such as 3D vision and industrial robots, to outdo competitors by reducing costs. Considering the nature of the manufacturing industry, a time-saving workflow and smooth linkwork between processes is vital. At Dellics, without any additional new installation in the automation lines, only a few improvements to the working process could raise productivity. Three requirements are the development of gripping technology by utilizing a 3D vision system for the recognition of the material shape and location, research on lighting projectors to target long distances and high illumination, and testing of algorithms/software to improve measurement accuracy and identify products. With some of the functional requisites mentioned above, improved robotic automation systems should provide an improved working environment to maximize overall production efficiency. In this article, the ways in which such a system can become the groundwork for establishing an unmanned working infrastructure are discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.162-162
• /
• 2022

Stormwater management is an essential component of land-use planning and development. Due to the additional challenges posed by climate change and urbanization, various stormwater management schemes have been developed to limit flood damages and ease water quality concerns. Nature-based solutions (NBS) are increasingly used as cost-effective measures to manage stormwater runoff from various land uses. Specifically, constructed wetlands were already considered as socially acceptable green stormwater infrastructures that are widely used in different countries. There is a large collection of published literature regarding the effectiveness or efficiency of constructed wetlands in treating stormwater runoff; however, metadata analyses using bibliographic information are very limited or seldomly explored. This study was conducted to determine the trends of publication regarding stormwater treatment wetlands using a bibliometric analysis approach. Moreover, the research productivity of various countries, authors, and institutions were also identified in the study. The Web of Science (WoS) database was utilized to retrieve bibliographic information. The keywords ("constructed wetland*" OR "treatment wetland*" OR "engineered wetland*" OR "artificial wetland*") AND ("stormwater*" or "storm water*") were used to retrieve pertinent information on stormwater treatment wetlands-related publication from 1990 up to 2021. The network map of keyword co-occurrence map was generated through the VOSviewer software and the contingency matrices were obtained using the Cortext platform (www.cortext.net). The results obtained from this inquiry revealed the areas of research that have been adequately explored by past studies. Furthermore, the extensive collection of published scientific literature enabled the identification of existing knowledge gaps in the field of stormwater treatment wetlands.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.634-639
• /
• 2013

The aim of the study is to develop the 3D visualization of Building Information Model and integrated 4D model for optimization of resources in the construction project. This study discuss the process of methodology and creation of 4D model of the project and simulate it to monitor the workflow at the site. Different stages of the construction process and activities are generated by using Revit and MS Project. MS project has been used for creation of the schedules and these are linked with the Revit for 3D modeling. The time used as the fourth dimension and 4D model created by using Navisworks Time liner software. Narges shopping center is presented as a case study to realize the actual uses and benefits of Building Information Model (BIM). Narges shopping mall is located in Tehran, Iran. As a part of Hekmat master plan, Narges shopping center is an 11 stores building with a total area of 30000 Sq.m. This shopping and entertainment center is comprised of 150 retails and two multi-use public halls with a capacity of 400 persons each and underground parking with total 400 parking space. The main purpose of architecture was to create an urban public center along with its revolving, spiral like form and an ever changing continuous façade by means of different colors, materials, which is in harmony with the other building of the master plan. The approximate cost of the project is $17 million and duration of the project schedule is 30 months. The developed Building Information Model enabled us to identify the potential collisions or clashes between various structural and architectural systems. 4D model has been used for limiting the interaction between subcontractors installing the different systems so rework could be avoided and productivity maximized. It is also observed that the utility of BIM for construction stimulation and clash detection is the best suitable method. Clash detection before the implementation of work is highly recommended to avoid rework.

• Tunnel and Underground Space
• /
• v.28 no.3
• /
• pp.209-231
• /
• 2018

Severe mine disasters have continued to occur around the world. To ensure worker's health and safety and enhance the productivity, a number of studies have been conducted for the development of wireless sensor network (WSN), environmental monitoring, and communication system in underground mines. An increase in development and application of these systems has just begun with the introduction of information and communication technology into the mining industry in Korea, and yet there have been only a few studies that considered the underground mine ventilation system. This study presented the literature review on the development of WSN and environmental monitoring in underground mines, and especially, on 7 subjects in terms of underground mine ventilation. Moreover, studies that especially conducted real-time environmental monitoring were reviewed and categorized by each commercial software commonly utilized for the ventilation network analysis. For the application in domestic underground mines, further issues were discussed regarding research subjects that may be needed in the future and domestic environmental standards that has been used in the underground mine operation. This paper is expected to be useful for the development of WSN-based environmental monitoring and communication system, as well as for related studies in the future.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.1
• /
• pp.22-29
• /
• 2024

In this study, we summarized the definition of smart vegetable seedling production technology, analysis of smart seedling production system, a hardware and software configuration model for smart seedling production system, research and development trends in smart seedling production system, and proposed future research and development plans for smart seedling production technology. Smart vegetable seedling production is a data-based seedling production, management, and distribution system that utilizes 4th Industrial Revolution technology to improve seedling productivity and quality. The production of vegetable seedlings using smart seedling production technology can be efficiently managed by collecting, analyzing, and managing information on seedlings, environment, and tasks at each stage of production by linking with the smart seedling integrated management system. However, there is still a lack of standardization of seedling standards and quality for each vegetable crop to establish smart seeding production technology, as well as development of smart seedling production element technology, which requires national wide R&D support.