• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1977

This experiment was conducted in order to find out the drawing performance of a two-wheel tractor under different levels of the soil moisture and hardness, so as to obtain some basic data for improving their drawing performance. With fairly homogeneous soil, 5 levels of soil moisture contents (8, 13, 17, 20 and 23%) and 3 levels of soil hardness (0 , 2 and 4kg/$cm^2$) were selected for this experiment.The summerized results are as follows ;1. The draft force, on the hard soil (hardness ; 4kg/$cm^2$), had a distinct tendency to decrease with the increasing soil moisture. On the medium soil (hardness ; 2 kg/$cm^2$), and the soft soil (hardness ; 0kg$cm^2$), the draft force showed the highest when the moisture contents were within the range of 16-19%.But the maximum draft force, on the soft soil, was higher than that on the medium soil by 10 %. 2. The driving axle torque increased with increasing soil by 10 %. 3.The values of horizontal distance between the soil reaction point and axle shaft were within the range of 0~10cm , and it had the tendency to increase with the increasing soil moisture. Also, it s value was the largest on the hard soil and the smallest on the soft soil. 4.The tractive efficiency decreased with the increasing soil moisture. On the hard soil, the average value of tractive efficiency was higher than that on the medium soil by 19.0% and that on the soft soil was lower than that on the medium soil. 5.The traction ratio were within the range of 30 ~45%, and their changing tendency with respect to the soil moisture was similar to that in the case of the draft force. 6. The travel resistance ratio tended to increased with increasing soil moisture, and the highest value was found on the soft soil, and the lowest on the hard soil.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.343-349
• /
• 2008

The wear between piston ring face and cylinder liner is an extremely unpredictable and hard-to-reproduce phenomenon that significantly decreases engine performance. This study will discuss characteristics of wear between hard and soft piston ring coatings with running surface of cylinder liner. Detailed tribological analysis by using Pin-on-Disk(POD) testing machine describes the lubricity mechanism between piston ring coatings and cylinder liner at different temperature with and without oil. The effect of surface roughness of the cylinder liner on the friction coefficient and wear amount of piston ring coatings will also be analyzed. To simulate scuffing mechanism between piston ring and cylinder liner, accelerated lab testing was performed. This study will provide the data from tribological testing of hard and soft piston ring coatings against cylinder liner. Furthermore, the microstructures and morphological features of the surface and the near-surface materials during wear will be investigated. From the scuffing test by using POD testing machine, scuffing mechanisms for the soft and hard coating will be analyzed and experimentally confirmed.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.112-117
• /
• 2018

Purpose: The aim of this study is to compare the short-term effectiveness of hard and soft stabilizing appliances (H-A and S-A) in treating patients with acute temporomandibular joint (TMJ) disc displacement without reduction (DDwoR). Methods: Eighty one patients diagnosed as acute TMJ DDwoR at oral medicine of Chosun University Dental Hospital from November 2016 to September 2017 were included in this study. The subjects were divided into three groups: The control group (34 patients treated without occlusal appliance), the H-A group (31 patients treated with H-A) and the S-A group (16 patients treated with S-A). The pain intensity using Visual Analog Scale and maximum mouth opening (MMO) were evaluated every week for 8 weeks. Results: The improvement of the pain intensity and MMO in the H-A group and the S-A group compared with the control group were noted (p<0.05). Conclusions: This study suggests that hard and S-As may be equally useful in treating patients with TMJ DDwoR. S-A could be recommended to reduce the symptoms of TMJ DDwoR in short period.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.547-554
• /
• 1994

This study was carried out in order to find out the soft tissue profile changes associated with maxillary incisor retraction in Angle's class I malocclusion patients. For this study fifty two female adult patients (Maximum Retraction Group 23, Minimum Retraction Group 29) who received orthodontic treatment were chosen. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. When considering the mean changes of soft tissue and hard tissue, UP, LIP, Ls, Li (p<0.001), Point B, Si (p<0.01), Point A, Ss (p<0.05) were significant posterior movement in Maximum Retraction Group and UIP (p<0.001), LIP, Ls, Li (p<0.01), Point B, Si (p<0.05) were significant posterior movement in Minimum Retraction Group. 2. When considering the correlations between hard tissue and soft tissue changes, greater correlations were found in Minimum Retraction Group between UIP and Ls (p<0.01), Point A and Ss, UIP and Li, Point B and Si (p<0.05) than Minimum Retraction Group. 3. Correlations (p<0.01) were found between upper incisor retraction and posterior movement of the upper and lower lip in Thin Lip-Thickness Group, whereas no significant correlations were found in Thick Lip-Thickness Group. 4. Mean changes of the soft tissue thickness subsequent to incisor retraction were increased (p<0.01) in upper lip (Ls-Ls'), whereas no changes were found in lower lip.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2
• /
• pp.75-79
• /
• 2008

In this paper, we propose a novel speech enhancement technique using global soft decision (GSD) based on the probabilistic outputs of support vector machine (SVM). Generally, speech enhancement algorithms applied soft decision gain modification and noise power estimation have bettor performance than those employing hard decision. Especially, global speech absence probability (GSAP), which is known as an effective measure of the speech absence in each frame, has been adopted to SD-based speech enhancement methods. For this reason, we introduce a new GSAP estimated from the probabilistic output of SVM using sigmoid function. The performance of the proposed algorithm is evaluated by the PESQ and MOS test under various noise environments and yields better results compared with the conventional GSD scheme.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.250-252
• /
• 2010

Vascular leiomyomas are benign tumors of smooth muscle origin arising from the muscularis layer of blood vessel walls. They can occur anywhere in the body where smooth muscle is found and usually occur in the lower extremity as a slow-growing, firm, occasionally painful mass. However they are rare in the head and neck and very rare in hard palate. Here we report a case of a vascular leiomyoma presenting as a soft mass of the hard palate and review the literatures.

• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2005

The static and dynamic rheological behavior of concentrated sodium dodecylsulfate (SDS) stabilized, deformability controllable polydimethylsiloxane (PDMS) emulsions is reported and comparisons made with silica (hard sphere) suspensions. Steady-mode measurements indicate 'hard' (viscoelastic) droplets behave as hard spheres, while 'soft' (viscous) droplets induce structural flexibility of the emulsion against shear. Dynamic-mode measurements reveal that viscoelasticity of droplets provides the great magnitude of elasticity for the 'hard' emulsion, while formation of planar films between droplets is the origin of the elasticity of 'soft' emulsions. Combination of steady and dynamic rheological behavior has enabled depiction of droplet structure evolution in relation to the shear stress applied, especially by taking advantage of the normal force that reflects the transient deformation of droplets.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.19-28
• /
• 1998

This paper is concerned with the implementation of the equalization technique in a DCS 1800 system employing the soft-decision output Viterbi algorithm (SOVA), which makes the hardware complexity comparable to the hard decision MLSE and gives reliable performance. Also, the channel estimation technique with enhances the perfdormance of the soft-decision output equalizer is proposed, and the Viterbi decoder which operates effectively with the soft-decision output of the qualizer is implemented using the Very High Speed ICs Hardware Description Language (VHDL). From the simulation results, it is shown that the implemented Viterbi decoder operates effectively and the SOVA outperforms the hard-decision MLSE in terms of the frame erasure rate (FER) and bit error rate (BER).

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.27-32
• /
• 2003

An efficient soft-decision decoding algorithm for binary block codes it proposed. The proposed soft-decision decoding algorithm is implemented by a series of hard-decision decoding process. By the hard-decision decoding result, the candidate codewords are efficiently searched for A new decoding method, which prevents the missing of the candidate codeword, is proposed. Also, the method fir reducing complexity is developed. This method removes the practical complexity increase caused by the improved algorithm. There facts are confirmed by the simulation results for binary (63, 36) BCH code.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.04a
• /
• pp.45-55
• /
• 2000

Recently, as the prepress mainstream is changed to the digital wolkflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. Generally, CRT monitors are also often used as a soft proofing device for hard-copy image output. However, displayed color image on CRT monitor does not match to the actual color printing sheets. Because, the color space of CRT monitor used RGB color space, and it is differ with printing device color space, CMY. Therefore, proper color compensations are needed to match the colors between hard-copy proofs on the printing device and soft copy proofs on the monitor. For the proper compensation, we used LUT and gamut mapping method for color space transformation between device dependent color space and device independent color space, vis a vis. This paper shows the application method and the usefulness of CRT monitor for the soft-copy proofing using the output characteristics of printing device.