• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.35-44
• /
• 2011

For printed electronic paper making which is high leveled dimensional stability. The furnish which is hard wood pulp and soft wood pulp, mixed with hard and soft wood pulp is added sea algae pulp. If sea algae pulp was added 15% contents, paper which is made with hard wood pulp is increased about 28% dimensional stability and soft wood pulp is increased about 32%, dimensional stability and hard wood 30% and soft wood 70% mixed pulp is increased about 40% dimensional stability.

• Mycobiology
• /
• v.28 no.1
• /
• pp.47-50
• /
• 2000

The capability of higher ascomyceteous fungi to cause typical soft-rot decay for wood under laboratory conditions is reviewed and discussed. Fungi tested were extremely active in the decomposition of timbers. Scanning electron micrographs illustrated typical soft-rot decay pattern of higher wood decay ascomycetes, with the exception of H. trugodes that caused white-rot decay. Most of the fungi tested could be grouped as soft-rot fungi that showed typical soft-rot type II. Hypha confined primarily to the resin canals in softwoods or vessel elements in hardwoods and spread tracheid to tracheid via pits of cell wall to cell wall with mechanical force.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.203-204
• /
• 1997

The authors studied on mulberry cutting of soft wood. It had been known that the rootability of softwood cuttings was formed after 25 days after winter bud sprouting. But, the result showed that the formation of rootability of soft wood was 9 days earlier than the conventional time.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.157-162
• /
• 2004

The objectives of this experiment were to study the growth and development of fruiting body of the two Ganoderma lucidum isolates on log of the soft wood Paraserianthes falcataria and the hard wood Shorea sp., and determination of organic germanium and crude ganoderic acid content of the fruiting body produced. The two Ganoderma lucidum isolates used were one Indonesian native (Indonesia isolate) and another isolate was purchased from Fungi Perfecti, USA (commercial isolate). The development and quality of the primordium and fruiting body of the mushroom, in general, were influenced by the isolates used. The types of wood, however, had no effect on the quality of the primordium and fruiting body produced. The Indonesian isolate produced better fruiting body compared to that of the commercial isolate. The development of fruiting body from primordium, however, was low for the two isolates tested. In general, only about one third of the primordium developed further into mature fruiting bodies, except for the commercial isolate grown on the soft wood medium in which more than 60% of the primordium developed into mature fruiting body. Apart from producing normal fruiting body, the commercial isolate also produced an abnormal one, which had a white mature pileus, whereas the normal one was brownish red. The organic germanium concentration of the fruiting body produced on the hard wood, in general, was higher than that of grown on the soft wood. The fruiting body from commercial isolate had higher organic germanium concentration compared to that of Indonesian isolate in both wood types. The two isolates used, however, had almost the same value of the crude ganoderic acid concentration in both types of wood tested. The Indonesian isolate had higher total yield of both organic germanium and crude ganoderic acid of the fruiting body produced compared to that of the commercial isolate.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.145-157
• /
• 1999

Wood dust is created when machines are used to cut or shape wood materials. Industries of high risk of wood dust exposure are sawmills, dimension mills, furniture industries, and carpenters, etc. Health effects associated with wood dust exposure includes dermatitis, allergic respiratory effects and cancer. Health effects of wood dus t are mainly depend on the concentration, dust size and exposure time. This study were carried out to evaluate the concentration and particle size distribution of wood dust during working processes. The subjects of this study were 53 workers exposed to wood dust in 7 furniture factories and 5 musical instruments, and 5 sawmill factories. The average total wood dust concentrations measured by personal cascade impactor were $1.82{\pm}2.31mg/m^3$ in primary manufacture, $3.59{\pm}1.72mg/m^3$ in s econdary manufacture, $5.09{\pm}1.46mg/m^3$ in sanding operation. Mass median diameters of hardwoods dust were $3.36{\mu}m$ in primary manufacture, $4.25{\mu}m$ in secondary manufacture, $4.21{\mu}m$ in sanding operation. softwoods dust were $3.39{\mu}m$ in primary manufacture, $4.34{\mu}m$ in secondary manufacture. Particle size distributions showed a nearly the same pattern in each working processes. The sample concentration of all hardwood dust exceeded the Threshold Limit Value(TLV) and 20.8% of the softwood dust exceeded the Threshold Limit Value. The range of size distribution were $0.5-10{\mu}m$ in the soft and hardwood dust. The respirable dust of soft and hardwood took up 59% and above. Therefore new threshold limit value for wood dust should be needed in Korea. Also, it should be done for various studies on health effects related to occupational exposure of wood dust.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.62-68
• /
• 2015

In order to get basic data for flood plain restoration, we surveyed the woody vegetation in Korean natural rivers and analyzed the species' characteristics with regards to patterns of richness and diversity. These characteristics were higher in hard wood forests than those in soft wood forests, such as Salix spp. community. Futhermore, they were the highest in the Prunus sargentii-Pinus densiflora community(H' 1.095), and the lowest in the Carpinus laxiflora community(H' 0.118) among the hard wood forests. Species' richness diversity were the highest in the Salix gracilistyla community, but the lowest in the S. koriyangi community or S. koreensis community among the soft wood forests. With regards to the dominant index, just one community is over 0.9, 13 communities are between 0.3-0.7 and 15 communities are less than 0.3. The Salix koreensis community was the highest at 0.931, and Prunus sargentii-Pinus densiflora community was the lowest at 0.13. Species' richness and diversity was significantly correlated with tree layer coverages and degree of slope. These results mean that in order to increase plant species diversity in flood plains planted hard woody trees, such as oaks and fir, are needed to suit environmental conditions with steeper slope and lower canopy coverage.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.68-77
• /
• 2006

The heartwood of cengal (Neobalanocarpus heimii) is known to have a high degree of decay resistance by virtue of its high extractive content. After 30 years in ground contact an utility pole of this tropical hardwood was found to be degraded only in the surface layers by cavity-forming soft rot fungi. The present work was undertaken 1) to characterize the degradation of cengal heartwood from the aspect of ultrastructure and chemistry and 2) to investigate the correlation between soft rot decay and its extractive microdistribution in wood tissues. The chemical analysis of cengal heartwood revealed the presence of a high amount of extractives as well as lignin. The wood contained a relatively high amount of condensed lignin and the guaiacyl units. Microscopic observations revealed that vessels, fibers and parenchyma cells (both ray and axial parenchyma) all contained extractives in their lumina, but in variable amounts. The lumina of fibers and most axial parenchyma were completely or almost completely filled with the extractives. TEM micrographs showed that cell walls were also impregnated with extractives and that pit membranes connecting parenchyma cells were well coated and impregnated with extractives. However, fungal hyphae were present in the extractive masses localized in cell lumina, and indications were that the extractives did not completely inhibit fungal growth. The extent of cell wall degradation varied with tissue types. The fibers appeared to be more susceptible to decay than vessels and parenchyma. Middle lamella was the only cell wall region which remained intact in all cell types which were severely degraded. The microscopic observations suggested a close correlation between extractive microdistribution and the pattern and extent of cell wall degradation. In addition to the toxicity to fungi, the physical constraint of the extractive material present in cengal heartwood cells is likely to have a profound effect on the growth and path of invasion of colonizing fungi, thus conferring protection to wood by restricting fungal entry into cell walls. The presence of relatively high amount of condensed lignin is also likely to be a factor in the resistance of cengal heartwood to soft rot decay.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.45-50
• /
• 2004

Currently, structural design of wood structure has been based on ASD (Allowable Structural Design) in Korea. However, the results from this method was known as greater than real value because variations of materials and various conditions were not considered sufficiently. So the study about the design method with probabilistic approach is being performed to overcome this problem. And the standard design method of RBD (Reliability Based Design) has been established and applied. In this study, to apply this method on the domestic wood, the distribution property of the lumber and Glulam was analyzed from the previous report and the basis of the standardized design method was established as soft conversion method from allowable stress used in ASD into reference resistance used in RBD. And through the additional study about the sample size as a important factor to effect on soft conversion, condition to be required in more accurate conversion was evaluated.