• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1641-1647
• /
• 2000

This paper presents an analysis of coverage and capacity for the multi-layer CDMA cellular system. The multi-layer CDMA system that shares a common frequency band consists of macrocells for outdoor users and picocells for indoor users. Though macrocells and picocells interfere with each other the capacity of the whole system can be increased, We have analyzed the effect of muual interference upon cell coverage soft handover areas and capacities. The parameters involved in the engineering of the system are discussed. The study results sow that we can control the service coverage of indoor picocells with the system parameters set properly. It is also show that the capacity of the whole system that the capacity of the whole system can be enhanced smoothly by deploying the indoor picocells within existing macrocells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.868-873
• /
• 2008

In this paper, we analyze the burst error performance of LDPC codes on perpendicular magnetic recording(PMR) channel. When burst error is generated on PMR channel, we use channel state information(CSI) to set the LLR information of channel detector zero. We consider the rate 0.94 LDPC codes and use SOVA as channel detector with low complexity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1305-1309
• /
• 2003

To utilize FeCoSiB amorphous films for magnetoelastic sensors, the temperature dependency of magnetization (M-T curve) and the magnetization properties of the amorphous films were investigated in this study. As the amount of cobalt In the films increased, the Curie temperature decreased but the crystallization temperature increased. In addition to this, the crystallization temperature was lower than the Curie temperature in the film containing 20 at% cobalt. The optimized annealing condition was set up by analyzing the H-T curve. And then, the amorphous film that has excellent magnetic properties and uni-axal anisotropy could be prepared for construction of the magnetoelastic sensor devices. The coercive force of the film was below 0.5 Oe and the anisotripic field was about 5 Oe.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.819-822
• /
• 2012

This paper describes an on-line magnetic distortion calibration procedure for a magnetometer. The horizontal magnetic field is calculated through the earth magnetic field sensed by 3-axes magnetometer. The ellipse equation is derived from a set of horizontal magnetic field data using least square method and calibration parameters are determined. The calibration process is performed iteratively until parameters are not renewed, and experimental results show the effectiveness of the devised method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.638-645
• /
• 2002

This paper presents a scheme for integrating PID control, gain scheduling and emerging techniques in the field of artificial intelligence, such as fuzzy logic and genetic algorithms for the speed control of a marine diesel engine. At first, local PID controllers are designed based on a local model obtained at each speed mode, whose parameters are optimally tuned using a real-coded genetic algorithm. Then, fuzzy "if-then" rules combine the local controllers as a consequence part to implement fuzzy gain scheduling. To demonstrate the performance of the proposed fuzzy PID controller on overall operating conditions, a set of simulation works on B'||'&'||'W's 4L80MC diesel engine are carried out.t.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.23-30
• /
• 2005

Computer attacks on vulnerable software are ubiquitous. Today's attacks on client PCs can be used to create armies of zombie computers that are capable of wide reach attacks on high profile businesses and governments. The simple act of patching software vulnerabilities will certainly mitigate this problem, but patching has its own set of problems. Further, it is frequently the case that patches which are available to mitigate vulnerabilities are not being made on a timely basis and sometimes are not being made at all. One solution to the patch management dilemma is outsourcing. This paper notes that outsourcing is not a carte blanche decision that can be made based on dollars, but rather that a contingency decision matrix can provide guidance on outsourcing solutions for patch management and other security components as well. The matrix recognizes that IS staff expertise and employee security awareness are two important factors in the outsourcing decision.

• Journal of The Korean Astronomical Society
• /
• v.33 no.2
• /
• pp.123-126
• /
• 2000

We have developed a near real-time flare alerting system which (1) downloads the latest GOES-l0 1-8 ${\AA}$ X-ray flux 1-min data by an automated ftp program and shell scripts, (2) produces a beep sound in a simple IDL widget program when the flux is larger than a critical value, and (3) makes it possible to do a wireless alerting by a set of portable transceivers. Thanks to the system, we have made successful Ha flare observations by the Solar Flare Telescope in Bohyunsan Optical Astronomy Observatory. This system is expected to be helpful for ground-based flare observers.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.409-414
• /
• 2001

This paper reports a technique for measuring a three-dimensional soil deformation and a simplified method to determine the three-dimensional contact area of agricultural tires in a soil bin. A Pirelli 12.4R28 radial-ply tire was used on soft soil. Effects of dynamic load and inflation pressure were determined using the equipment for measuring soil deformation on the soil surface. Soil deformation measurements were made under three conditions of over-load (59kPa-14.2kN), rated-load (108kPa-11.8kN) and under-load (157kPa-9.3kN) in the combinations of the inflation pressures (kPa) and the tire load (kN). The results from three conditions were shown that the contact area of the over-load increased considerably bigger than those of the rated-load and the under-load. Therefore, to regulate soil deformation, the inflation pressure and the tire load should be set according to the soil conditions.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.113-120
• /
• 2021

The Distance Measuring Equipment (DME) is a ground-based aircraft navigation system and is considered as an infrastructure that ensures resilient aircraft navigation capability during the event of a Global Navigation Satellite System (GNSS) outage. The main problem of DME as a GNSS back up is a poor positioning accuracy that often reaches over 100 m. In this paper, a novel approach of applying deep reinforcement learning to a DME pulse design is introduced to improve the DME distance measuring accuracy. This method is designed to develop multipath-resistant DME pulses that comply with current DME specifications. In the research, a Markov Decision Process (MDP) for DME pulse design is set using pulse shape requirements and a timing error. Based on the designed MDP, we created an Environment called PulseEnv, which allows the agent representing a DME pulse shape to explore continuous space using the Soft Actor Critical (SAC) reinforcement learning algorithm.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.502-506
• /
• 2013

The cash flow forecasting is normally done by contractors in construction industry at early stages of the project for contractual decisions. The decision making in such situations involve uncertainty about future cash flows and assessment of working capital requirements gains more importance in projects constrained by cash. The traditional approach to assess the working capital requirements is deterministic in and neglects the uncertainty. This paper presents an alternate approach to assessment of working capital requirements for contractor based on fuzzy set theory by considering the uncertainty and ambiguity involved at payment periods. Statistical methods are used to deal with the uncertainty for working capital curves. Membership functions of the fuzzy sets are developed based on these statistical measures. Advantage of fuzzy peak working capital requirements is demonstrated using peak working capital requirements curves. Fuzzy peak working capital requirements curves are compared with deterministic curves and the results are analyzed. Fuzzy weighted average methodology is proposed for the assessment of peak working capital requirements.