• 한국자기학회지
• /
• 제5권5호
• /
• pp.601-605
• /
• 1995

Magnetic properties of FeTaN and FeTaC films deposited by DC magnetron reactive sputter were investigated, and correlated with their microstructures. The optimum magnetic properties of Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 4000 (5MHz) are observed in the $Fe_{78.8}Ta_{8.5}N_{12.7}$ film, and Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 2700 (5MHz) in the $Fe_{75.6}Ta_{8.1}C_{16.3}$ film. In both FeTaN and FeTaC films with minimum grain size show the best soft magnetic properties. Thermal stability of the soft magnetic properties of FeTaN is found to be higher than FeTaC for similar compositons. TaN and TaC particles form to retard the growth of $\alpha$-Fe grains. TaN particles in FeTaN show higher efficiency in retarding the grain growth during heat treatments resulting the higher thermal stability, compared to TaC particles in FeTaC films.

• Journal of Magnetics
• /
• 제11권2호
• /
• pp.77-82
• /
• 2006

The structure and magnetic properties of Fe-Ni films, deposited by DC magnetron sputtering on Si(111) wafer, have been studied. The spin wave stiffness constant is determined by Brillouin light scattering (BLS) and compared with the value obtained from magnetization measurements. The range of exchange interaction was determined as 0.4 atomic distances in the film deposited in a bias magnetic field, which is 1/2 that in the film grown in no bias magnetic field. The results show that the dimensions of exchange coupling increased by the sputtering in the magnetic field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.778-781
• /
• 2002

MI(Magneto-Impedance) sensor which is made by thin films has significantly high detecting sensitivity in weak magnetic field. It also has a merit to be able to build in the low power system. Its structure is simple, which makes it easier to prepare a miniature. In this study, its magnetic permeability and anisotropy field$(H_k)$ as a function of a thickness of sputtered amorphous CoZrNb films with zero-magnetostriction and excellent soft magnetic property are investigated. In order to make a uniaxial anisotropy, film was subjected to the post annealing in a static magnetic field with 1KOe intensity at 250, 300, and $320^{\circ}C}$ respectively for 2 hours. Anisotropy field$(H_k)$ of film is measured by using a MH loop tracer. Its magnetic permeability of a film is measured over the frequency range from 1 MHz to 750MHz. It has shown that the magnetic permeability of amorphous CoZrNb film is decreased due to the skin effect with increasing a thickness of the CoZrNb film, and hence its driving frequency is lowered. And, it was examined on the permeability and impedance to fabricate the MI sensor which acts at a low frequency by thickening a CoZrNb film relatively.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.53-56
• /
• 2008

This study proposes a simple nano-patterning process for the fabrication of magnetic nanodot arrays on a large area substrate. Ni nanodots were fabricated on a large area (4 inches in diameter) Si substrate using the soft lithographic technique using self-assembled surface micelles of Polystyrene-block-Poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer formed at the air/water interface as a mask. The hexagonal array of micelles was successfully transferred to a Ni thin film on a Si substrate using the Langmuir-Blodgett technique. After ion-mill dry etching, a magnetic Ni nanodot array with a regular hexagon array structure was obtained. The Ni nanodot array showed in-plane easy axis magnetization and typical soft magnetic properties.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• 한국결정학회지
• /
• 제12권3호
• /
• pp.182-187
• /
• 2001

고포화자속밀도 특성을 갖는 Fe-Hf-N 박막의 진공분위기 열처리 시 발생하는 연자기 특성 열화현상을 조사하였다. 열처리 온도는 450℃∼650℃이며, TEM 분석 및 전자회절빔 분석을 통하여 박막의 미세구조와 국부적 미세결정상을분석하였다 450℃에서 600℃까지 열처리한 박막의 연자기 특성은 미세화 되어있는 α-Fe 결정립이 성장함에 따라, 열처리 전에 비해 보자력 이 0.2 Oe 정도 증가하고 유효투자율이 1500 정도 감소하는 것으로 나타났다. 포화자속밀도는 600℃ 이하까지는 0.5 KG 정도 미량 증가하나 650℃에서는 모든 연자기 특성 이 급격하게 떨어졌다. 이러한 열화현상은 650℃ 열처리시 α-Fe격자 내에 존재하던 N이 HfN로 석출됨에 따라, α-Fe 결정립이 급격히 성장하여 박막의 미세구조가 초미세 결정구조를 벗어났기 때문인 것으로 나타났다.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.85-89
• /
• 2014

본 연구에서는 자기 소프트 몰드를 이용하여 피치 143.59 nm의 고 성능 NWGP(Nano Wire Grid Polarizer) 필름의 새로운 제조 방법을 제안하였다. 제작된 편광필름은 $6cm{\times}6cm$의 PET기판위에 알루미늄 격자 구조를 가지고 있으며, 이는 TFT-LCD(Thin Flat Transistor Liquid Crystal Display)에 응용 가능할 것으로 보인다. 자기 소프트 몰드는 너비 70.39 nm의 규격으로 제작되었으며, 이를 이용하여 2단계의 복제과정을 거쳐 제작되어진다. 이를 통해 본 연구에서는 기판위에 75.68 nm 선폭과 64.76 nm의 높이 143.59 nm pitch를 가지는 격자구조의 NWGP 패턴을 제작하였다. 또한, 이는 800 nm 파장 영역 대에서 75%의 최대 투과율과 10%의 최소 투과율을 가지는 것을 확인하였다. 따라서, 본 공정을 통해 독창적인 저 비용의 나노패터닝 기술로 디스플레이 산업에서 적용되어 질 것으로 보여진다.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.135-141
• /
• 1994

스퍼터방식으로 제조한 FeZrCrN 미결정박막의 질소 유입량의 변화와 Cr 첨가량 변화에 따라 연자기특성과 내반응성 및 내식성을 조사하였다. 질소 유립량 증가에 따라 포화자속밀도는 감소하고 적 절한량(질소 유입량 3%)의 질소가 유입 되었을 때 열처리후에도 이방성 분산 감소효과 등에 의하여 우수 한 연자기특성이 출현 하였으며, 이때 보자력은 0.4 Oe, 투자율은 5 MHz에서 2600 정도를 나타내었다. FeZrN 박막에 Cr을 7.5 at.% 정도 첨가하였을때 포화자속밀도는 12.5kg까지 감소하였지만 양호한 연자기 특성이 그대로 유지되었고 Cr 첨가에 의해 현저한 내식성의 향상과 집합 glass와의 내반응성의 개선이 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.200-201
• /
• 2002

Recently, a countermeasure for the electromagnetic noise emission on RF integrated transmission line using the loss generation of ferromagnetic thin films is briefly suggested$\^$1,2/. Without the magnetic film, the noise harmonics of the signal pass through the transmission line with only a little attenuation. The ideal role of magnetic film is not to raise insertion losses in the pass-band and to give as large attenuation as possible to eliminate the noise harmonics at the stop-band, the frequency range higher than the meaningful signal as shown in Fig. 1. and Fig. 2. (omitted)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.132-135
• /
• 2002

MI(Magneto-Impedance) sensor which is made by thin films has significantly high detecting sensitivity in weak magnetic field. It also has a merit to be able to build in the low power system. Its structure is simple, which makes it easier to prepare a miniature. In this study, its magnetic permeability and anisotropy field($H_{k}$) as a function of a thickness of sputtered amorphous CoZrNb films with zero-magnetostriction and soft magnetic property are investigated. In order to make a uniaxial anisotropy, film was subjected to the post annealing in a static magnetic field with 1KOe intensity at 250, 300, and $320^{\circ}C$ respectively for 2 hours. Magnetic properties of film are measured by using a MH loop tracer. Its magnetic permeability of a film is measured over the frequency range 1 MHz to 750MHz. And, it was examined on the permeability and impedance to design the MI sensor which acts at 50MHz by thickening a CoZrNb film relatively, and fabricated the MI sensor which acts at the 50MHz.