• 제목/요약/키워드: Soft ground Stress-strain

검색결과 33건 처리시간 0.018초

연약지반 보강성토에서 섬유보강재 소요인장강도의 결정 (The Determination of Required Tensile Strength of Geosynthetic Reinforcements for Embankment on Soft Ground)

  • 이광열;황재홍;구태곤
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.379-385
    • /
    • 2003
  • 기존의 섬유보강성토제체의 설계에서 보강재의 변형을 고려하지 않고 연직응력을 보강재의 인장강도로 사용함으로써, 흙구조물의 파괴응력에 대응하는 보강재의 한계응력산정과 그에 따른 보강재의 규격결정이 불가능했다. 보강재에 의해 보강된 성토제체의 파괴면에서 보강재와 흙의 거동은 초기응력단계에서는 일체로서 거동하지만 응력의 증가에 따라 변형량의 차이가 증가한다. 이러한 문제는 흙구조물의 보강재설계에서 중요한 요소로서 보강효과에 큰 영향을 미칠 수 있다. 본 연구에서는 연약지반위에 PET Mat로 보강한 성토제체의 보강재 설계 시 파괴면상의 보강재 설치위치에서 흙과 보강재의 변형량을 고려한 설계방법을 제시하였다. 연구결과에 의하면, 허용안전율을 확보하는 범위내에서 예상파괴면상의 보강재 설치위치에서의 보강재의 인장강도는 흙의 응력 이상이어야 하며, 흙의 변형링${\Delta S}$과 보강재의 변형량${\Delta G}$이 일체로 거동하는 보강재의 소요인장강도를 보강재의 설계인장강도로서 결정하는 것이 합리적이고 경제적인 것으로 평가되었다.

점성토의 유한요소해석에서 전단파라미터에 따른 성토 및 굴착 거동 (Embankment and Excavation Behaviour with Shear Parameters of Soft Clayey Soil in FEM)

  • 김병일;최찬용;홍강한;한상재
    • 한국지반공학회논문집
    • /
    • 제34권2호
    • /
    • pp.5-17
    • /
    • 2018
  • 본 연구에서는 연약지반에서의 재하/제하에 대한 안정해석과 응력-변형 해석시 전단 파라미터(UU; Unconsolidated Undrained, CU; Consolidated Undrained(전응력), ${\bar{CU}}$ ; Consolidated Undrained(유효응력))에 따른 초기 지중응력, 강도, 응력-변형 특성을 평가하였다. 시공단계를 고려한 유한요소 해석시 입력하는 전단 파라미터에 따라 초기 지중응력과 이후 해석 결과가 달라질 수 있음을 확인하였다. 특히, Mohr-Coulomb 모델의 입력 파라미터인 내부마찰각(Phi)을 0으로 입력하여 초기 지중응력과 이후 응력-변형 거동을 해석할 경우 잘못된 결과를 도출 할 수 있다는 것을 확인하였다. 전응력 파라미터, CU를 초기 및 전단시 일괄 적용한 해석과 유효응력 파라미터, CU에서 전응력 파라미터, CU로 변경한 해석 결과가 큰 차이를 보이지 않았다. 따라서, 연약지반에 대한 수치해석시 CU 파라미터를 적용하여도 초기 지중응력과 이후 응력-변형 거동에 큰 차이 없이 예측할 수 있음을 알 수 있었다. 또한, 실무에서 적용하기 편한 방법으로 실제 흙의 거동과 동일한 강도를 갖는 Mohr-Coulomb 모델의 전단 파라미터를 산정하는 방법을 제안하였다.

개별진공압이 적용된 연약지반의 응력과 변형 특성 (Characteristic of stress and strain of soft ground applied individual vacuum pressure)

  • 안동욱;한상재;김병일;정승용;김수삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.467-472
    • /
    • 2010
  • Individual vacuum pressure method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or pre-loading method. In this study, given the inner displacement of the ground where the individual vacuum pressure is applied, this dissertation aimed to reproduce the state of stress in the ground that is subject to the constraints created by the depth of improvement area. Modified Cam Clay theory which made it possible to take into account the isotropic displacement of the ground was applied to the NAP-IVP used simulation; the conception of equivalent permeability proposed by Hird was also applied so that the 3-dimensional real construction effect of drain materials could be reflected in the analysis.

  • PDF

표준압밀시험에 의한 점토의 초기탄성계수 산정 (The Estimation of Initial Elastic Modulus of Clay by Standard Consolidation Test)

  • 권병해;임성훈
    • 한국농공학회논문집
    • /
    • 제66권1호
    • /
    • pp.15-24
    • /
    • 2024
  • Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.

Seismic deformation behaviors of the soft clay after freezing-thawing

  • Zhen-Dong Cui;Meng-Hui Huang;Chen-Yu Hou;Li Yuan
    • Geomechanics and Engineering
    • /
    • 제34권3호
    • /
    • pp.303-316
    • /
    • 2023
  • With the development and utilization of urban underground space, the artificial ground freezing technology has been widely used in the construction of underground engineering in soft soil areas. The mechanical properties of soft clay changed greatly after freezing and thawing, which affected the seismic performance of underground structures. In this paper, a series of triaxial tests were carried out to study the dynamic response of the freezing-thawing clay under the seismic load considering different dynamic stress amplitudes and different confining pressures. The reduction factor of dynamic shear stress was determined to correct the amplitude of the seismic load. The deformation development mode, the stress-strain relationship and the energy dissipation behavior of the soft clay under the seismic load were analyzed. An empirical model for predicting accumulative plastic strain was proposed and validated considering the loading times, the confining pressures and the dynamic stress amplitudes. The relevant research results can provide a theoretical reference to the seismic design of underground structures in soft clay areas.

일정변형률(CRS) 시험에서의 압밀특성 (Consolidation Characteristics at the Constant Rate of Strain(CRS) Test)

  • 이달원;김시중
    • 농업과학연구
    • /
    • 제37권3호
    • /
    • pp.491-499
    • /
    • 2010
  • This study was carried out to investigate the consolidation characteristics of the remolded clay by the oedometer and the constant rate of strain(CRS) consolidation tests. As the rate of strain increases, the settlement rapidly decreased. As the ratio of the sand in the specimen increases, its effect on the rate of strain to the settlement was reduced. As the effective stress increased, the void ratio decreased, while the rate of strain increased, it did not show a clear variation. The reduction of the void ratio was shown to be less than the oedometer test. The coefficient of vertical consolidation with effective stress showed very large variation around preconsolidation stress, but the rate of strain did not provide significant effects. The rate of strain with effective stress gradually decreased at all tests and mixed ratio of sand. The rate of strain at the constant rate of strain tests showed smaller than in the oedometer test. The coefficient of consolidation at the constant rate of strain tests showed much more increase than in the oedometer test. The ratio of the vertical coefficient of consolidation by the odometer and the constant rate of strain tests showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to designing the soft ground improvement.

일정변형률 시험을 이용한 재성형 광양 해성점토의 압밀특성 연구 (A Study on the Consolidation Characteristics Using the Constant Strain Rate Test of Remolded Gwangyang Marine Clay)

  • 장정민;김진영;정운기;최진;진영식;강권수;백원진;이강일
    • 한국지반신소재학회논문집
    • /
    • 제13권4호
    • /
    • pp.33-43
    • /
    • 2014
  • 최근 들어 연약지반상에 구조물을 건설하는 경우가 증가하고 있으며, 사회기반 시설의 유지관리 및 건설 비용의 절감을 위해 사전압밀공법 및 연직배수공법과 같은 기존의 방법을 이용하여 지반 개량이 행해지고 있다. 이와 같이 연약점성토 지반상에 다양한 개량공법이 적용 될 때, 점성토의 낮은 투수계수로 인한 장기간에 걸친 압밀침하가 중요하게 된다. 압밀침하와 관련된 기존 연구결과에 따르면, 기존의 표준압밀시험의 재하기간은 압밀정수 산정에 최소한 10일 이상의 시간을 요하게 된다. 따라서 이 연구에서는 서남해안의 대표적인 연약지반으로 구성된 광양만 재성형 해성점토를 이용하여 표준압밀시험과, 일정변형률 압밀시험의 변형률 속도를 변화시킨 실험을 수행하였다. 실내시험결과를 통해 등변형률 속도에 따른 압축특성, 변형률-유효응력관계, 재하속도에 따른 간극수압 변화특성, 압밀정수와 등변형률 속도의 관계를 비교/분석하였다.

연악지반의 쇄석다짐말뚝에 대한 거동 분석 (I) (The Behavior of Rammed Aggregate Piers (RAP) in Soft Ground (I))

  • 배경태;이종규
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.169-183
    • /
    • 2007
  • 쇄석다짐말뚝으로 보강된 연약지반 상 기초지반의 침하특성과 하중분담효과를 구명하기 위하여 말뚝과 지반의 경계면 조건, 치환율, 형상비 및 상재하중 등을 고려하여 말뚝의 입력물성치 산정을 위한 현장재하시험과 수치해석을 수행하였고 본 연구의 해석결과와 비교, 검증하기 위하여 현장원형(prototype)시험을 진행 중에 있다. 아울러 기존의 SCP에 대한 탄성 하중전이 이론을 보정하여 수정식을 제안하였다. 해석결과 연성기초에 설치된 쇄석다짐말뚝의 경우 강성기초와는 다르게 경계면 조건에 따라 크게 영향을 받으며 침하특성은 자유변형률(free strain)로 인하여 말뚝은 감소하고 주변지반은 증가하는 경향을 보였으며 응력집중비는 말뚝 하부로 내려감에 따라 증가하였다. 또한 치환율과 형상비 증가에 따라 최대 응력집중비가 증가하나 어느 한계 이상에서는 수렴되었고 고치환율과 긴 말뚝에서는 상재하중 증가에 따른 영향을 크게 받는 것으로 나타났다.

연약지반의 모래다짐말뚝에 대한 하중전이 연구 (Study on Lond Transfer Characteristics of Sand Compaction Piles in Soft Soil Deposits)

  • 김재권;김수일;정삼성
    • 한국지반공학회논문집
    • /
    • 제20권7호
    • /
    • pp.183-196
    • /
    • 2004
  • 모래다짐말뚝은 압밀침하촉진과 지지력향상을 도모할 수 있는 연약지반 개량공법으로 그 사용성이 증가하고 있다. 본 연구에서는 실내시험과 3-D 유한요소해석을 수행하여 $30-40\%$의 저치환율 모래다짐말뚝의 하중전이특성을 고찰해본다. 또한, 이러한 연구결과는 실험치와의 검증을 통하여 모래다짐말뚝 하중전이특성평가를 위한 간편법을 제시하는데 사용되었다.

Design of geocell reinforcement for supporting embankments on soft ground

  • Latha, G. Madhavi
    • Geomechanics and Engineering
    • /
    • 제3권2호
    • /
    • pp.117-130
    • /
    • 2011
  • The methods of design available for geocell-supported embankments are very few. Two of the earlier methods are considered in this paper and a third method is proposed and compared with them. In the first method called slip line method, plastic bearing failure of the soil was assumed and the additional resistance due to geocell layer is calculated using a non-symmetric slip line field in the soft foundation soil. In the second method based on slope stability analysis, general-purpose slope stability program was used to design the geocell mattress of required strength for embankment. In the third method proposed in this paper, geocell reinforcement is designed based on the plane strain finite element analysis of embankments. The geocell layer is modelled as an equivalent composite layer with modified strength and stiffness values. The strength and dimensions of geocell layer is estimated for the required bearing capacity or permissible deformations. These three design methods are compared through a design example. It is observed that the design method based on finite element simulations is most comprehensive because it addresses the issue of permissible deformations and also gives complete stress, deformation and strain behaviour of the embankment under given loading conditions.