• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1381-1389
• /
• 2003

컴퓨터와 첨단영상매체의 발달로 디자인 분야에서도 컴퓨터를 사용하여 색을 자유롭게 선택할 수 있는 그래픽 소프트웨어가 도입되고 있으나 영상정보의 색채 재현성과 영상입출력 장치의 다양화로 인한 색채 불일치에 대한 문제들이 극복해야할 시급한 과제로 부각되고 있다. 따라서, 색채 영상정보 입출력장치의 색채구현 성능과 인간의 색채인지 원리이론을 바탕으로 색보정 알고리즘이 발전하여 색보정 엔진의 개발이 국제적으로 활발히 진행되고 있는 연구 분야임에도 불구하고 국내에서는 그 연구사례가 상대적으로 극히 미비한 실정이며, 더욱이, CAD 시스템을 이용한 패션/텍스타일 디자인 분야에서는 이에 대한 연구가 거의 이루어지지 않고 있다. 본 연구에서는 염색 직물의 색을 CAD시스템을 이용하여 soft-copy로 재현하고 이것을 다시 hard-copy로 출력하여 물리적 측정치와 주관적 색채 인지도간의 일치도를 비교하고, 물리적, 주관적 색차의 한계치를 제시함으로써, 패션/텍스타일 디자인 CAD시스템 운용에 기초가 되는 자료를 제공하려 하였다. 연구의 절차는 객관적 측정과 주관적 평가 두 단계로 나누어 진행되었다 연구에 사용된 직물은 7가지 색상의 면 염직물로써, CAD시스템을 이용하여 각 직물당 5개의 soft-copy를 재현하고, 이것을 다시 hard-copy로 출력하여 spectrophotometer를 이용해 물리적 측정(ΔE, ΔL, Δc, Δh)을 실시하였다. 또한 주관적 평가에는 20명의 의류학 전공 학생들이 참여하였다. 결과 분석에는 분산분석과 Friedman분석이 사용되었다. 연구 결과 색차 측정에 대한 물리적 측정치와 1차 주관적 평가치 사이의 일치도는 90.5%로 나타났으며, 2차 주관적 평가치와의 rank order는 거의 일치하는 것으로 나타났다. 또한 주관적 평가에서 피험자들은 색차인지에 있어 CIELAB 색채공간의 각각의 색요소 차이보다는 전체 색차에 더 영향을 받는 것으로 나타났다.녹색콩풍뎅이의 유충에 의하여 피해를 받는 것이 확인되었다. 녹색콩풍뎅이 유충의 피해를 받은 금잔디는 황화되거나 시들음 증상이 있었고, 이듬해 봄에는 잔디의 회복이 지연되었다.ic conductivity. The changes of $varepsilon$′ and $varepsilon$" were well estimated with this modified Havriliak-Negami model.05). 상기의 결과를 토대로, 성장과 전어체내 지방산조성에 있어서 뱀장어 치어의 사료내 EPA와 DHA의 첨가효과 미약한 것으로 판단되며, 사료내 LNA (n-3)와 LA(n-6) HUFA을 각각 0.35%, 0.65% 첨가했을 때 WG, SGR, FE, PER이 가장 높았으나, 이전의 실험(Takeuchi, 1980)과 동일한 수준인 n-3와 n-6를 각각 0.5%씩 첨가한 실험구와는 유의적인 차이를 보이지 않았다. 이렇게 볼 때, 뱀장어 치어의 필수지방산은 LNA (n-3), LA (n-6)이고, 그 적정수준은 각각 0.35-0.5%, 0.5-0.65%임을 보여준다.George W, Bush)가 새로운 지도자로 취임하여 얼마 되지 않은 2001년 9월 11일 사상 초유로 본토에서 알 카에다 테러리스트 조직에 의해 공격받게 되었다. 뉴욕의 세계무역센터 빌딩 2개가 완전히 붕괴되고, 펜타곤에 민간 여객기가 충돌하여 많은 사람이 살상 당하고, 전체적으로 세계 80여 개국으로부터의 6천여 명이 살상되었다. 전 세계와 미국은 국제 테러리스트들의 야만적 행위에 대해 경악하고 이제 미국은 그 대외정책의 최우선순위를 국제 테러를 발본색원하는 것에 두게 되었다. 본 논문은 1998년 한국에서 새로이 출범한 김대중 행정부가 북한에 대해 실시한 포용정책이 어떠한 성과를 거두고 어떠한 문제점을 간과하고 있는가에 대해 논의하고, 대북 정책의 새로운 지평을 논의하는 것을 목적으로 하고

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.7
• /
• pp.49-57
• /
• 2008

This paper presents a voltage source type half-bridge series resonant high frequency (HF) inverter for induction heated fixing roller in copy machines. This high-frequency inverter works under zero current soft switching (ZCS) commutation and has wide power regulation range due to employing a pulse density modulation (PDM) scheme. Transient and steady state operating modes of the inverter are presented in this paper together with its PDM-based power regulation system. Experimental operating performances of the developed HF-ZCS inverter as well as power losses and actual efficiency are discussed and compared with computer simulation results.

• Imaging Science in Dentistry
• /
• v.41 no.1
• /
• pp.11-16
• /
• 2011

Purpose : The aim of this study was to evaluate the effect of liquid crystal display (LCD) monitor type and observer experience on the diagnostic performance in soft-copy interpretations of maxillary sinus inflammatory lesions on panoramic radiographs. Materials and Methods : Ninety maxillary sinuses on panoramic images were grouped into negative and positive groups according to the presence of inflammatory lesions, using CT for confirmation. Monochrome and color LCDs were used. Six observers participated and ROC analysis was performed to evaluate the diagnostic performance. The reading time, fatigue score, and inter-/intra-observer agreements were assessed. Results : The interpretation of maxillary sinus inflammatory lesions was affected by the LCD monitor type used and by the experience of the observer. The reading time was not significantly different, however the fatigue score was significantly different between two LCD monitors. Inter-observer agreement was relatively good in experienced observers, while the intra-observer agreement for all observers was good with monochrome LCD but not with color LCD. Conclusion : The less experienced observers showed lowered diagnostic ability with a general color LCD.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.415-420
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated king roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.226-228
• /
• 2006

This paper presents the two lossless auxiliary inducors-assisted voltage source type half bridge(single ended push pull:SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation forwide its output power regulation ranges and load variations under constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operatprinciple is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation charactertics-based on the high frequency PDM strategy. The experimenoperating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimenones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliimplemented here is proved from the practical point of view.

• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1153-1164
• /
• 2007

One of the most challenging technical issues in mobile communication for multimedia is Quality of Service (QoS) management of handover calls. This paper proposes a 2-level handover control system to copy with this problem. A 2-level handover control system consists of resource reservation and call admission control modules. The resource reservation module divides the network resource into Hard and Soft reserved resource. The Hard reserved resource is only for the handover calls while the Soft reserved resource is for both the handovers and the new calls. And also, the resource reservation module classifies handovers into primary and secondary handovers based on often they occur. The call admission control module deals with the primary and secondary handover calls in different ways. The new calls can use Soft reserved resource only if there is sufficient amount available in the Hard reserved resource. Proposed system is evaluated using an M/M/c/c queueing model. It is shown that proposed system allows more efficient utilization of network resource without degrading QoS comparing with the legacy handover control systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1084-1094
• /
• 1991

Upon introducing satellite communication system to korea, one of the important problems to copy with is the effect from the probable intentional interference i. e. jamming. In this paper, we have considered the M any PSK signal and the soft limiter type, which contains hard limiter, nonhnear satellite transponder in environments of uplink tone or noise jamming plus Gaussian noise and downlink Gaussian noise. Using the derived error rate equation, we have evaluated numerically the error performance of BPSK and QPSK system, and shown in figures in terms of upink and downink earner to jamming rater(CJR) and limiting level. From the results we have known that tone jamming effect on the error performance in BPSK and QPSK signals in nonlinear satelhie shnnel become less with increasing the uplink CNR and with decreasing the liniting level. And in a tone jamming, the limiting level affects hardly on the error performance of both BPSK and QPSK signals. When limiting leveri is zero, BPSK and QPSK signals show the best error rate performance.

• Journal of Periodontal and Implant Science
• /
• v.42 no.6
• /
• pp.217-223
• /
• 2012

Purpose: Several parameters have been described for determining the success or failure of dental implants. The surface properties of transgingival implant components have had a great impact on the long-term success of dental implants. The purpose of this study was to compare the tendency of two periodontal pathogens to adhere to and colonize zirconia abutments and titanium alloys both in hard surfaces and soft tissues. Methods: Twelve patients participated in this study. Three months after implant placement, the abutments were connected. Five weeks following the abutment connections, the abutments were removed, probing depth measurements were recorded, and gingival biopsies were performed. The abutments and gingival biopsies taken from the buccal gingiva were analyzed using real-time polymerase chain reaction to compare the DNA copy numbers of Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and total bacteria. The surface free energy of the abutments was calculated using the sessile water drop method before replacement. Data analyses used the Mann Whitney U-test, and P-values below 0.05 find statistical significance. Results: The present study showed no statistically significant differences between the DNA copy numbers of A. actinomycetemcomitans, P. gingivalis, and total bacteria for both the titanium and zirconia abutments and the biopsies taken from their buccal gingiva. The differences between the free surface energy of the abutments had no influence on the microbiological findings. Conclusions: Zirconia surfaces have comparable properties to titanium alloy surfaces and may be suitable and safe materials for the long-term success of dental implants.

• Journal of the Korean Society of Costume
• /
• v.61 no.7
• /
• pp.125-134
• /
• 2011

Sumuk drawings are made with water and muk(墨), which are used to express the light, shade and texture of an object. The expression methods of oriental drawing can be divided into three methods: pictorialization, abstractness and realism. The method of pictorialization expresses traditional pictures or letters. Abstractness show an artist's aesthetic feeling through sprinkling, splashing and spreading diffusion of muk. The method of realism is Takbon which makes a copy painting directly from a monument by rubbing a paper with ink. Modern fashion designer attempts to develop a new Sumuk technique based on both oriental drawing style and western watercolor painting style. Rather than following the designated styles of oriental drawings and Korean drawings, new Sumuk technique colors detailed structures expressed as outlines, dots and lines or creates abstract patterns through spreading or spilling in showing theme of flowers, plants and insects. In this study, in order to develop fashion cultural products with Sumuk technique, rubbed copy of the ancient 'Emile bell Takbon' was used. For this study, with the combination of different colors and the patterns from 'Emile bell Takbon', designs for scarfs, shirts and one-piece dresses were created. These techniques enabled to express soft and strong Takbon image in simple Sumuk technique in harmony with modern trends.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.