• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.277-282
• /
• 2004

This paper concerns about dynamic analysis of an underwater test miner, which operates on cohesive soil. The test miner consists of tracked vehicle and pick-up. device. The motion oj pick-up device relative to the vehicle chassis is controlled by two pairs of hydraulic cylinders. The test miner is modeled by means of a commercial software. A terramechanics model of cohesive soft soil is implemented to the software and applied to dynamic analysis of the test miner model. The dynamic responses of test miner are studied with respect to of four different types of terrain conditions.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.222-228
• /
• 2008

본 논문은 해저 연약지반 위를 주행하는 시험집광기의 동적거동 해석을 다루고 있다. 시험집광기는 단괴채집장치, 무한궤도, 단괴파쇄기, 샤시프레임, 전기 전자 시스템으로 구성되어 있다. 시험집광기의 공기 중 무게는 8,600 kg이며, 수중에서의 시험집광기의 평균접지압은 6.0 kPa이다. 상용해석 프로그램인 RecurDyn-LM과 Visual Fortran 90을 이용하여 시험집광기의 동적거동 해석 모델 및 유체저항력 모델을 구축하였다. 상용해석 프로그램(RecurDyn-LM)에서 제공되는 사용자 정의 서브루틴을 이용하여 연약지반역학 모델 및 유체저항력 모델을 구축하였으며, 이를 통하여 해저 시험집광기의 동적거동 해석을 수행하였다. 궤도속도, 지반조건, 항력계수 및 추가질량 계수의 변화에 따른 시험집광기의 동적응답을 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.411-418
• /
• 2009

So far the Limit Equilibrium Method has been widely used by way of 2-D slope stability analysis for the evaluation of land slides and slope failures. However recently the evaluation of 3-D slope stability analysis has been comparatively possible owing to the developments of obtaining the terrain data and geological data and of 3-D slope stability analysis softwares. In Japan the evaluation of the 3-D slope stability analysis has been necessary for the stability analysis of the tunnel mouth. In this study we inspected the economic effects introducing the 3-D slope stability analysis for larger scale landslides and slope failures. In case of 3-D slope stability analysis of landslides we acquired the results that we reduce the cost of the countermeasure work of pile work by 40% comparing the 2-D slope stability analysis. Moreover in case of the stability analysis of slope failures we figured out the results that we reduce the cost of the countermeasure work of anchor works by 20%. Furthermore we proved that 3-D slope stability analysis is effective for the stability analysis of tunnel mouths around the sides of landslides and large scale embankment which we could have not evaluated by conventional 2-D section stability analysis.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.250-253
• /
• 2003

This paper concerns about an experimental investigation about steering performance of tracked vehicle on extremely soft soil based on DOE(Design Of Experiment) using L8 orthogonal Array. A tracked vehicle model with principal dimensions of $0.9m{\times}0.8m{\times}0.4m$ and weight 167kg was constructed with a pair of driving chain links driven by two AC-servo motors. The tracks are configured with detachable grousers, the span of which can be varied. Deep seabed was simulated by means of bentonite-water mixture in a soil bin of $6.0m{\times}3.7m{\times}0.7m$. Turning radii of vehicle and torques of motors were measured with respect to experimental variables; steering ratio, driving speed, grouser chevron angle, grouser span, grouser height. The effects of experiment variables on steering performance are evaluated.

• 자원환경지질
• /
• 제48권3호
• /
• pp.205-212
• /
• 2015

전 세계적으로 이슈가 되고 있는 소형 무인항공기를 탑재체로 한 항공삼각측량 기술을 국내의 광산개발 현장에 적용하여 활용성을 검증하였다. 대상광산은 경상남도 경주시에 위치한 감포 46호 스멕타이트 광산으로 노천채광 광산이다. 멀티콥터인 DJI S1000에 Cannon Mark III 카메라를 탑재하여 $600m{\times}380m$ 영역을 중첩하며 448장의 사진을 촬영한 후, AgiSoft사의 photoscan 소프트웨어를 이용해 자료처리하여 정사영상과 정밀 수치지형모델을 제작하였다. 6개의 지상 기준점을 이용해 정밀도 10cm 이내의 항공 삼각측량 자료를 생산하였으며, 3D 지질모델링 소프트웨어로 수치지형모델과 정사 영상을 익스포트하여 3D 지질모델링을 위한 Topo surface를 제작하였다. 1시간 이내의 짧은 촬영시간으로 고정밀의 항공측량 자료 확보가 가능해 노천광산의 주기적인 촬영을 통한 채광량과 사면붕괴 모니터링이 적은 비용과 시간으로 가능함을 확인하였고, 항공삼각측량결과와 3D 지질모델링의 직접적인 연계 기술에 의해 노천광산 채광에 의한 지표면 변화를 즉각적으로 반영할 수 있어 생산관리의 효율성을 증대할 수 있으리라 여겨진다.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.11-17
• /
• 2013

'Multi-scale mass-deployable cooperative robots' is a next generation robotics paradigm where a large number of robots that vary in size cooperate in a hierarchical fashion to collect information in various environments. While this paradigm can exhibit the effective solution for exploration of the wide area consisting of various types of terrain, its technical maturity is still in its infant state and many technical hurdles should be resolved to realize this paradigm. In this paper, we propose to develop new design and manufacturing methodologies for the multi-scale mass-deployable cooperative robots. In doing so, we present various fundamental technologies in four different research fields. (1) Adaptable design methods consist of compliant mechanisms and hierarchical structures which provide robots with a unified way to overcome various and irregular terrains. (2) Soft composite materials realize the compliancy in these structures. (3) Multi-scale integrative manufacturing techniques are convergence of traditional methods for producing various sized robots assembled by such materials. Finally, (4) the control and communication techniques for the massive swarm robot systems enable multiple functionally simple robots to accomplish the complex job by effective job distribution.