• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.51-63
• /
• 2017

The touch panel was developed decades ago and has become a popular input device in daily life. Because human-computer interaction is becoming more important, the next generation of touch panels require stretchability and bio-compatibility to allow integration with the human body. However, because most touch panels were developed based on stiff, brittle electrodes, electronic touch panels face difficulties to achieve such requirements. In this paper, for the first time, we demonstrate an ionic touch panel based on polyacrylamide hydrogel containing LiCl ions. The panel is soft and stretchable and thus, can sustain a large deformation. The panel can freely transmit light information through it because the hydrogel is transparent, with 99 % transmittance for visible light. A 1-dimensional touch strip was investigated to reveal the basic mechanism of sensing, and a 2-dimensional touch panel was developed to demonstrate its functionalities. The ionic touch panel was operated under high deformation with more than 1000% areal strain without sacrificing its functionalities. Furthermore, an epidermal touch panel on the skin was developed to demonstrate the mechanical and optical invisibility of the ionic touch panel through writing words, playing the piano and playing games.

• 한국패션뷰티학회지
• /
• 제5권2호
• /
• pp.5-11
• /
• 2007

The results of study for colorless hair manicure, which is well known for its useful point and supplement damaged hair glossy, luster, elastic and soft one are as follows. Hair protection effect by the management time of colorless hair manicure products, as below. When it comes to dyed hair group's hair surface condition. both level 3 and level 6 hairs cuticle changed to be irregular. And lose of cuticle has been observed with a fact that the space between cuticles are not clear. In case of manicuring, manicuring 2 weeks after dyeing is better complemented surface damage than manicuring right after dyeing. So, in case of making cuticle morphologic of good hair quality in manicuring dyed hair, it's more effective to manicure right after dyeing to both level 3 and level 6 hair.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1391-1395
• /
• 2006

In non-contact mode atomic force microscopy, the response of a resonating tip is used to measure the nanoscale topography and other properties of a sample surface. However, the tip-surface interactions can affect the tip response and destabilize the non-contact mode control. Especially it is difficult to obtain a good scanned image of high adhesion surfaces such as polymers using conventional hard NCHR tip and non-contact mode control. In this study, experimental investigation is made on the non-contact mode imaging and we report the microcantilever having low stiffness (OMCL) is useful to measure the properties of samples such as elasticity. In addition, we proved that it was adequate to use low stiffness microcantilever to obtain a good scanned image in AFM for the soft and high adhesion sample.

• 패션비즈니스
• /
• 제9권4호
• /
• pp.170-177
• /
• 2005

Velvet fabric has soft touch, subtle luster, and good draping property. Threedimensional simulated models of cylindrical monofilaments constituting the velvet fabric were prepared. Image analysis techniques were used to measure the reflected light from the surface of velvet fabrics and the simulated images of the pile fibers. As the angle of incidence increased, the reflectance from the velvet surface became lower. Most of the reflection came from the tips of the cut piles. Crushed velvet type also was modeled using slant cylinder models on top of a base plate.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.211-220
• /
• 2002

CGS(Compaction Grouting System) is widely used in reinforcement of structural foundation and ground improvement in soft ground. But the effects of ground improvement depending on the type of soil must be studied in order to adopt in various soils (granular soil and cohesive soil). In this study, characteristics of ground improvement (the increase of N value, increase in unit weight, vertical displacement on the ground surface) by CGS method was compared through two cases that were performed in granular and cohesive soil. The results show that the closer to the grout hole, the more increase in N value and this trend appear distinctly in granular soil. Unit weight of ground increase largely near by the grout hole and decrease in far from it independently of the soil type. The vertical displacement on the ground surface appeared in smaller area in case of granular soil than cohesive soil.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.162-163
• /
• 2014

Aluminum anodizing is a technique that can be formed pores well aligned various diameters. We were prepared CNFs using the polymer as carbon source using the AAO as a template. CNFs can be heat treated at $1400^{\circ}C$ and became soft carbon. It showed electrochemical behavior by Crystallization. In this experiment, I was observing the behavior as a anode material for LIC of CNFs having different diameters.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.32-37
• /
• 2001

건축물내 바닥면에서의 지자기장 분포에 대한 모사실험과 측정을 통하여 철골이 지자기의 분포에 미치는 영향을 연구하였다. 지자기 분포에 대한 모사시험은 유한요소법으로 수행하였으며, 바닥면에서 지자기장의 수직분력(Z)은 플럭스 게이트형 마그네토미터로 측정하였다. 수평으로 배열된 철골은 지자기장의 Z성분 분포에 미치는 영향이 비교적 적으나, 수직으로 배열된 철골은 토의 분포에 강한 영향을 주어 국소 지자기 교란을 일으킨다. 이러한 국소 지자기 교란은 연자성체로 이루어진 바닥이나 우회로 구조를 가지는 연자성체 바닥으로 완화된다.

• 한국의상디자인학회지
• /
• 제2권2호
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.512-518
• /
• 1996

Amorphous carbon nitride (a-C:N) multilayerfilms are formed by using altermating conditions during film deposition in are ion plating process. Because hard a-C:N films prepared with suitable megative bias voltages have large compressive stress, it is difficult to increase film thickness more than 200nm. Preparing multilayer films composed of hard layers and soft layers, we can grow thick multilayer films on Si and SKH steel substrate. The total thickness of multilayer films is more than 1$\mu\textrm{m}$. The multilayer films are several times thicker than the single layer films and almost equal in hardness and internal stress to the single layer ones. X-ray photoelectron spectroscopy(XPS) and Raman spectroscopy reveal that multilayer films equal to single layer films in structure, which is similar to the structure of DLC films.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1142-1152
• /
• 2004

The purpose of this study is to verify the visual perception on various cotton fabrics of the same color. Results obtained through subjective evaluation of cotton fabrics showed that the textural adjectives could be classified into 3; warm/cool, flexibility and surface property, the sensibility adjectives into 5; simple, attractive, masculine, conservative, comfortable and visual perception adjectives into 6; hard, warm, smooth, brilliant, classic and casual. Image distribution results on 12 different fabrics, showed different distributions among textiles on visual perception due to varying texture and sensibility. In thickness, weight, weave type, bending and surface characteristics which are structure characteristics, significant differences were shown for visual perception examination. Having placed into an image scale, visual perception dimension developed divided into the ＇soft-hard＇ axis and the ＇warm-cool＇ axis.