• 제목/요약/키워드: Soft Surface

검색결과 971건 처리시간 0.025초

배양된 Pseudomonas aeruginosa의 소프트 콘택트 렌즈 표면부착에 대한 미세구조적 연구 (A Study of Ultrastructure on attachment of Soft Contact Lens Surface of Incubated Pseudomonas aeruginosa)

  • 김덕훈;박용태;유해병
    • 한국안광학회지
    • /
    • 제5권2호
    • /
    • pp.11-14
    • /
    • 2000
  • 소프트 콘택트렌즈는 취급이 간단하고 착용감이 좋고 미용효과를 가지며 운동과정에서 좋은 부착상태를 가지므로 피검자들은 시력교정으로 많이 사용되고 있다. 그러나 사용의 부주의로 눈에 부작용을 일으킬 수 있다. 본 연구는 배양된 P. aeruginosa의 소프트 콘택트렌즈 표면부착에 대한 미세구조적 상태를 규명하기 위해서 저자들은 주사전자현미경을 이용해서 소프트 콘택트렌즈 표면을 관찰하였다. 샘플 제작과정에서 $OsO_4$의 후고정과 tannic acid에 염색한 것이 가장 좋은 관찰이 되었다. 균의 모양은 막대모양으로 섬모가 형성되어 있었다. 후고정을 하지 않는 샘플에서는 많은 이물질과 인공산물로서 균의 동정이 어려웠다.

  • PDF

Proposed surface modeling for slip resistance of the shoe-floor interface

  • Kim, In-Ju
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
    • /
    • pp.515-528
    • /
    • 1995
  • Slips and falls are the major causes of the pedestrian injuries in the industry and the general community throughout the world. With the awareness of these problems, the friction coefficients of the interface between floorings and footwear have been measured for the evaluation of slip resistant properties. During this measurement process, the surface texture has been shown to be substantially effective to the friction mechanism between shoe heels and floor surfaces under various types of walking environment. Roughness, either of the floor surface or shoe heels, provides the necessary drainage spaces. This roughness can be designed into the shoe heel but this is inadequate in some cases, especially a wear. Therefore, it is essential that the proper roughness for the floor surface coverings should be provided. The phenomena that observed at the interface between a sliding elastomer and a rigid contaminated floor surface are very diverse and combined mechanisms. Besides, the real surface geometry is quite complicate and the characteristics of both mating surfaces are continuously changing in the process of running-in so that a finite number of surface parameters can not provide a proper description of the complex and peculiar shoe - floor contact sliding mechanism. It is hypothesised that the interface topography changes are mainly occurred in the shoe heel surfaces, because the general property of the shoe is soft in the face of hardness compared with the floor materials This point can be idealized as sliding of a soft shoe heel over an array of wedge-shaped hard asperities of floor surface. Therefore, it is considered that a modelling for shoe - floor contact sliding mechanism is mainly depended upon the surface topography of the floor counterforce. With the model development, several surface parameters were measured and tested to choose the best describing surface parameters. As the result, the asperity peak density (APD) of the floor surface was developed as one of the best describing parameters to explain the ambiguous shoe - floor interface friction mechanism. It is concluded that the floor surface should be continuously monitored with the suitable surface parameters and kept the proper level of roughness to maintain the footwear slip resistance. This result can be applied to the initial stage of design for the floor coverings.

  • PDF

써클 및 동일 재질 콘택트렌즈의 임상 적용시 눈에 미치는 영향 (The Effect of Circle Lens and Soft Contact Lens with Identical Material in Clinical Application on the Eyes)

  • 박상희;김소라;박미정
    • 한국안광학회지
    • /
    • 제16권2호
    • /
    • pp.147-157
    • /
    • 2011
  • 목적: 본 연구에서는 써클 콘택트렌즈의 착용 실태를 조사하고, 임상 적용 시 동일재질의 일반 소프트 콘택트렌즈 착용 시의 순목횟수, 비침입성 눈물막 파괴시간 및 렌즈 표면의 차이를 비교하여 착색 여부에 따른 차이를 알아보고자 하였다. 방법: 80명을 대상으로 써클 콘택트렌즈의 착용 실태를 알아보았으며, 20대 20안을 대상으로 하여 동일한 재질 및 파라미터의 일반 소프트 콘택트렌즈와 써클 콘택트렌즈를 각각 5일 동안 착용시킨 후 순목 횟수, 비 침입성 눈물막 파괴시간을 측정하였다. 또한, 주사전자현미경을 이용하여 렌즈의 표면을 관찰하였다. 결과: 써클 콘택트렌즈 교체의 주요 원인이 불편감이라고 답한 응답자가 50%에 달하였으며, 67%가 하루에 6시간 이상을 착용하는 것으로 나타났다. 콘택트렌즈 착용 1일, 3일, 5일째에 눈물막이 안정화된 시점인 착용 30분 후와 3시간 후의 순목 횟수는 두 종류의 렌즈 모두 착용 기간이 증가할수록 증가하는 경향을 보였다. 3일째, 5일째 착용 3시간 후에는 써클 콘택트렌즈 착용 시와 소프트 콘택트렌즈 착용 시의 순목 횟수가 통계적으로 유의한 차이가 나타났다. 콘택트렌즈를 착용한 상태에서의 비침입성 눈물막 파괴시간은 착용 1일째 30분 후 소프트 콘택트렌즈 착용 시는 6.0 초, 써클 콘택트렌즈는 3.7 초로 통계적으로 유의한 차이가 있었다. 착용 3시간 후에도 두 렌즈 사이의 비침입성 눈물막 파괴시간에는 통계적으로 유의한 차이가 있었으며, 착용 3일째와 5일째도 마찬가지였다. 써클 콘택트렌즈와 일반 소프트 콘택트렌즈의 전후면과 써클 콘택트렌즈 후면의 표면조도(surface roughness)는 동일했으나 써클 콘택트렌즈는 착색된 부분인 렌즈 전면부는 균일하지 않고 요철이 많았다. 결론: 써클 콘택트렌즈의 표면 차이가 렌즈 착용 시 습윤성의 차이를 야기하였을 것으로 보이며 그로 인하여 불편감을 느끼게 되었을 것으로 생각되어졌다. 본 연구 결과로 착색으로 인한 써클 콘택트렌즈와 일반 소프트 콘택트렌즈의 차이를 밝혔으므로 건강한 써클 콘택트렌즈의 착용에 도움이 될 수 있으리라 여겨진다.

성장 중인 쥐에서 음식물의 경도가 하악 과두의 해면골에 미치는 영향 : 미세전산화 단층촬영을 이용한 연구 (THE EFFECTS OF DIETARY CONSISTENCY ON THE TRABECULAR BONE ARCHITECTURE IN GROWING MOUSE MANDIBULAR CONDYLE : A STUDY USING MICRO-CONFUTED TOMOGRAPHY)

  • 윤석희;이상대;김정욱;이상훈;한세현;김종철
    • 대한소아치과학회지
    • /
    • 제31권2호
    • /
    • pp.228-235
    • /
    • 2004
  • 하악 과두의 발달과 증식은 측두하악관절 부위의 생역학적 환경의 변화에 따라 변경될 수 있다. 이 부위에 전달되는 생역학적 하중은 섭취하는 음식물의 경도를 다르게 함으로써 변화시킬 수 있다. 이번 연구의 목적은 성장 중인 쥐에서 부드러운 음식물의 섭취에 의해 저작력을 변화시키는 것이 하악 과두의 해면골의 형태를 변화시킬 수 있는지 미세전산화 단층촬영을 이용하여 분석하는 것이었다. 생후 21일 된 C57BL/6 쥐 36마리를 무작위로 두 그룹으로 나누었다. 8주 동안 대조군의 쥐들은 일반적인 딱딱한 덩어리의 사료를, 실험군의 쥐들은 덩어리의 사료를 잘게 갈은 후 물과 섞어 부드럽게 만들어 먹였다. 또한 실험군의 쥐들의 하악 절치를 일주일에 두 번씩 잘라서 짧게 만들었다. 8주 후 모든 쥐들을 희생하여 우측 하악 과두를 준비하였다. 미세전산화 단층촬영과 삼차원 영상 분석프로그램을 이용하여 하악 과두 해면골의 bone volume(BV), bone surface(BS), total volume(TV) bone volume fraction(BV/TV), surface to volume ratio(BS/BV), trabecular thickness(Tb. Th.), structure model index(SMI)와 degree of anisotropy(DA)를 측정하고 이들 값으로부터 trabecular number(Tb. N.)와 trabecular separation (Tb. Sp.)을 계산하였다 미세전산화 단층영상을 얻은 후 하악 과두의 조직 표본을 만들었다. 연구 결과는 다음과 같았다. 1. Bone volume fraction(BV/TV), trabecular thickness(Tb. Th.)와 trabecular number(Tb. N.)가 대조군에 비해 부드러운 음식을 먹인 실험군에서 유의하게 감소되었다(p<0.05). 2. Trabecular separation(Tb. Sp.)은 부드러운 음식을 먹인 실험군에서 유의하게 증가하였다(p<0.05). 3. Surface to volume ratio(BS/BV), structure model index(SMI), degree of anisotropy (DA)는 두 군 사이에 유의한 차이를 보이지 않았다(p>0.05). 4. 조직 절편을 관찰한 결과, 부드러운 사료를 먹인 실험군에서 하악 과두의 연골층의 증식 층과 전체 두께가 상당히 감소하였다.

  • PDF

만성요통환자에서 족저 접촉면의 경도에 따른 요추전만도의 변화 (The Change of Lordosis according to Plantar Surface Compliance in Patients with Chronic Low Back Pain)

  • 공희경;조현래;배성수
    • The Journal of Korean Physical Therapy
    • /
    • 제15권4호
    • /
    • pp.13-23
    • /
    • 2003
  • The purpose of this study was to evaluate the change of lordosis according to plantar surface compliance in patients with chronic low back pain. Thirty patients with chronic low back pain aged between 20 and 40 were assigned to 3 groups: control group, experimental groups (FHRS group, FSRH group). The lordosis was examined before and after adaptation with corresponding foam types. The results were as follows : 1. As the result of comparing lordosis before and after test of the control group which any change did not exist in plantar surface compliance, there was not a significant difference(p>0.05). 2. As the result of comparing lordosis before and after test of the FHRS group which forefoot part of plantar surface is hard and rear foot part is soft, there was the significant increase(p<0.05). 3. As the result of comparing lordosis before and after test of the FSRH group which forefoot part of plantar surface is soft and rear foot part is hard, there was the significant decrease(p<0.05). 4. As the result of comparing lordosis of the FHRS group and FSRH group, there was not a significant difference before test(p>0.05). But, there was a significant difference after test(p<0.05).

  • PDF

Electrochemical Study of Three Stainless Steel Alloys and Titanium Metal in Cola Soft Drinks

  • Peralta-Lopez, D.;Sotelo-Mazon, O.;Henao, J.;Porcayo-Calderon, J.;Valdez, S.;Salinas-Solano, G.;Martinez-Gomez, L.
    • Journal of Electrochemical Science and Technology
    • /
    • 제8권4호
    • /
    • pp.294-306
    • /
    • 2017
  • Stainless steels and titanium alloys are widely used in the medical industry as replacement materials. These materials may be affected by the conditions and type of environment. In the same manner, soft drinks are widely consumed products. It is of interest for dental industry to know the behavior of medical-grade alloys when these are in contact with soft drinks, since any excessive ion release can suppose a risk for human health. In the present study, the electrochemical behavior of three stainless steel alloys and pure titanium was analyzed using three types of cola soft drinks as electrolyte. The objective of this study was to evaluate the response of these metallic materials in each type of solution (cola standard, light and zero). Different electrochemical techniques were used for the evaluation of the alloys, namely potentiodynamic polarization, linear polarization, and open-circuit potential measurements. The corrosion resistance of the stainless-steel alloys and titanium in the cola soft drinks was provided by the formation of a stable passive film formed by metal oxides. Scanning electron microscopy was used as a complementary technique to reveal corrosion phenomena at the surface of the materials evaluated.

연약지반에 적용된 변단면 연약지반보강기초의 거동분석 (Behavior of Variable Cross-Section Soft Ground Reinforced Foundation in Soft Grounds)

  • 김기웅;김동욱;조명수
    • 한국지반신소재학회논문집
    • /
    • 제15권4호
    • /
    • pp.89-96
    • /
    • 2016
  • 인천 ${\bigcirc}{\bigcirc}$지역의 연약지반에 시공된 변단면 연약지반보강기초(Variable cross-section soft ground reinforced foundation)의 연직압축거동을 분석하였다. 변단면 연약지반보강기초는 원지반과 고화재를 혼합교반하여 형성되는 고형체의 높은 강성과 강도를 이용하여 상부구조물로부터 유발되는 연약하중을 효과적으로 저항하기 위하여 시공된다. 변단면 연약지반보강기초는 군말뚝 형식으로 시공이 되는데, 정확한 연직거동을 알기 위하여 1개소의 기초에 대한 연직재하시험을 수행하였다. 변단면 연약지반보강기초의 거동을 일반적인 깊은 기초의 거동과 비교하기 위하여 유사한 천층지반조건에 시공된 PHC 파일의 재하시험 결과와 비교하여 재하하중에 따른 침하량 및 하중전이 거동특성을 분석하였다. 연직재하시험결과를 비교분석하였다. 변단면 연약지반보강기초는 제한된 범위의 연직하중에 대하여 천층에서도 효율적으로 저항하는 것으로 분석되었다.

The Influence of Charged Static Electricity on LCD Glass and Neutralization Characteristic by Soft X-ray

  • Choi, Chang-Hoon;Han, Sang-Ho;Park, Sun-Woo;Yun, Hae-Sang
    • Journal of Information Display
    • /
    • 제1권1호
    • /
    • pp.52-58
    • /
    • 2000
  • We observed that static electricity has an influence on the etching unformity of dry etching process. When the static electricity was applied from-200[V]to-1000[V] on glass substrates, the etching rate uniformity was changed to 1.5%-15%. In this experiment, the soft X-ray to neutralize static electricity was adopted as ore of neutralization methods. As an experimental result, soft X-ray irradiation improved neutralization capability on the surface of LCD glass substrate within the short time, about 15-30sec. The difference of etching rate uniformity was below 0.5%.

  • PDF

연질 및 경질 초속경도막방수재를 복합화한 옥상노출방수공법에 관한 실험적 연구(균열 대응성) (An Experimental Study on the Roofing Waterproofing Method Combined Soft and Hard Rapid Hardening Membrane)

  • 최은규;서현재;이정훈;이선규;송제영;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 추계 학술논문 발표대회
    • /
    • pp.177-178
    • /
    • 2018
  • In the case of conventional ultra-fast hardness membrane waterproofing material (polyurea, etc.), damage such as breakage or tearing occurred frequently at the time of cracking of the surface after waterproofing. In this study, it is suggested that a waterproof layer can not cope with the occurrence of cracks at the same time by applying the soft type waterproofing material of soft type at the lower part of the construction method (securing of elongation) To minimize the possibility of water resistance.

  • PDF