• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.237.1-237.1
• /
• 2016

Electrical properties of graphene-based field effect transistors (G-FETs) can be degraded in ambient conditions owing to physisorbed oxygen or water molecules on the graphene surface. Passivation technique is one of a fascinating strategy for fabrication of G-FETs, which allows to sustain electrical properties of graphene in the long term without disrupting its inherent properties: transparency, flexibility and thinness. Ironically, despite its importance in producing high performance graphene devices, this method has been much less studied compared to patterning or device fabrication processes. Here we report a novel surface passivation method by using atomically thin self-assembled alkane layers such as C18- NH2, C18-Br and C36 to prevent unintentional doping effects that can suppress the degradation of electrical properties. In each passivated device, we observe a shift in charge neutral point to near zero gate voltage and it maintains the device performance for 1 year. In addition, the fabricated PG-FETs on a plastic substrate with ion-gel gate dielectrics exhibit not only mechanical flexibility but also long-term stability in ambient conditions. Therefore, we believe that these highly transparent and ultra-thin passivation layers can become a promising candidate in a wide range of graphene based electronic applications.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.512-521
• /
• 2015

In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1118-1125
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing Bearing Capacity Evaluation method for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 21 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. According to result of tests, Terzaghi's bearing capacity method is adequate to calculate bearing capacity in non-stiff material(geotextile, geogrid). But, It can't adequate to stiff material(bamboo net). So, New bearing capacity method suggest surface reinforcement method of very soft ground which Terzaghi's bearing capacity method modify for effect of stiffness.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.178-183
• /
• 2016

Semiconductor gas sensors based on metal oxide are widely used in a number of applications, from health and safety to energy efficiency and emission control. Nanomaterials including nanowires, nanorods, and nanoparticles have dominated the research focus in this field owing to their large number of surface sites that facilitate surface reactions. Recently, metal oxide hollow structures using soft templates have been developed owing to their high sensing properties with large-area uniformity. Here, we provide a brief overview of metal oxide hollow structures and their gas-sensing properties from the aspects of template size, morphology, and additives. In addition, a gas-sensing mechanism and perspectives are presented.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.423-428
• /
• 2005

If the load of constructing vehicles during the construction work acts on the road or the ground surface on the soft ground, due to the excess stresses in soils the trafficability of the vehicles influences the constructing efficiency, constructing period and so on. Stress distribution in soils is the very important element to design and to solve the problems of settlement, safety of foundations and trafficability of constructing vehicle in civil engineering. This research represents the comparative estimation of the actual and theoretical measurement on the underground stress of outer layer for each soil after the observation of each top soil layer for its vertical and horizontal stress in (1)homogeneous sand ground (2) weak stratum with the sand soil (3) weak stratum with gravel of the soil model, and it also investigates the effect of subsidence of ground by the repeated load. The underground stress turn out to be different in the value of theoretical and actual measurement after the trial examination of model.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.15.1-15.1
• /
• 2009

Nano transfer printing and micro contact printing is well known printing method based on soft lithography which uses conformal soft elastomer with designed surface relief structures. Here I introduce another class of novel 3D nanofabrication technique by using the same elastomer but in a different manner. The approach, which we refer to as proximity field nanopatterning, uses the surface-reliefed elastomers as phase masks to pattern thick layers of transparent, photosensitive materials. Aspects of the optics, the materials, and the physical chemistry associated with this method are outlined. A range of 3D structures illustrate its capabilities, and several application examples demonstrate possible areas of use in technologies ranging from microfluidics to photonic materials to density gradient structures for chemical release and high-energy density science.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.310-313
• /
• 2008

Recently, study on the weak interaction energy between the soft polymer surface and liquid crystals has been a primary topic for new LC device applications. In this paper, to understand the switching property of nematic liquid crystals (LCs) at the interface with a weak anchoring boundary, we investigate experimentally the rotation property of surface nematic director by electric field on non-treated Poly-Methylmethacrylate (PMMA, $T_g=110^{\circ}C$, Sigma Aldrich) film observed under various temperatures including the glass transition temperature ($T_g$) of the polymer layer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.479-482
• /
• 2002

The purpose of this paper is to present and discuss some of evaporation and desiccation observed in field experiments. Surface desiccation of dredged material is basically changed by evaporation characteristics which is controlled by weather and ploughing interval, etc. This study shows that ploughing interval is important factors in desiccation of dredged soft clay. A series of field experiments with variation of ploughing interval were carried out to get evaporation effiency and strength increase. In this study, it is proposed that ploughing technique on the total surface area expedites surface desiccation efficiency. Desiccation efficiency is improved when ploughing technique is applied on the surface area.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.80-81
• /
• 2013

There is the increasing number of constructing soil or structure on the soft ground during public works. Usually cement or slag cement has been the traditional material for surface soil stabilization method. Recently, early strength development properties of hardening agent is required for driving abilities of execution equipment and shortening of the construction time. Therefore, the purpose of this study is to develop the early compressive strength hardening agent for surface soil stabilization. The study was confirmed performance and availability of hardening agent using early strength type cement and industrial by-product minerals through early strength development properties in accordance with water cement ratio, content of hardening agent for soft soil.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.63-68
• /
• 2019

The dimensional quality of flexible foams is often difficult to be evaluated through general machine vision inspection methods due to the free deformation of the outer shape. For the evaluation of the dimensions of flexible foams, methods of estimating the size of the product through the expansion rate of the product surface are evaluated. Specimens with various dimensions and surface gratings are prepared, and the degree of surface expansion is measured through machine vision. The correlation, between the measured surface grid size and the actual size of test specimens, is analyzed. We further analyze the correlation between the size of test specimens and the position of the surface grid. This study provides a basis for estimating the actual dimensions of specimens by measuring the surface expansion of flexible foams.