• 한국환경보건학회지
• /
• 제44권3호
• /
• pp.244-249
• /
• 2018

Objectives: The purpose of this study was the investigation of bromide and bromate in drinking water of water supply plants, mineral springs and small water supply system located in northern area of Gyeonggi province. Methods: Analytical method was based on EPA 326.0 to use Postcolumn reaction (PCR). The instrument was 887 professional UV/VIS detector IC manufactured in Metrohm. Results: Bromate was detected at $0.5{\sim}2.4{\mu}g/L$ in tap water from 5 water supply plants. These plants were used as disinfection method for sodium hypochlorite and on-site chlorine that causes generate bromate as a by products even if not used ozone. Conclusions: The bromate was detected up to $2.5{\mu}g/Lin$ drinking water in northern Gyeonggi area that showed within $10{\mu}g/L$ for standard of tap water. However, the continuous monitoring of bromate is necessary in drinking water.

• Nuclear Engineering and Technology
• /
• 제35권6호
• /
• pp.566-580
• /
• 2003

To resolve the concern of the SWR possibility in LMR and improve the economic feature of LMR, relative performance of various SG designs using a double tube bundle configuration is evaluated and a new SG design concept is proposed. The new steam generator design houses two tube bundles that are functionally different and its tube bundle region is radially divided into two. It prevents the occurrence of sodium water reaction while sodium is still used as the coolant for the primary heat transport system. The feasibility of the SG with a double tube bundle for actual use in an LMR plant is evaluated by setting up the skeleton of the NSSS for various possible configurations of the SG tube bundles. The evaluation revealed the relative advantages and disadvantages of the configurations and the new SG design concept performs good and can be actually used in an LMR plant.

• 대한화학회지
• /
• 제32권2호
• /
• pp.149-155
• /
• 1988

ZSM-5, ZSM-8, ZSM-11 및 실리카라이트를 포함하는 펜타실 제올라이트들을 여러가지 유기양이온과 실리카졸을 사용하여 합성하고 반응온도, 교반, 숙성시간 등 합성조건을 변화시키므로서 균일한 크기와 모양을 갖는 결정을 얻었다. TEA-OH(수산화 사에틸암모늄), TPA-OH, TBA-OH 및 Choline이 유기양이온으로 사용되었으며 콜로이달 실리카(Snowtex)를 실리카원으로 사용했다. 합성 실험은 $2{\ell}$ 압력 반응기 (parr제품)와 자체 제작된 자석식 반응기를 사용하였으며, 반응물 조성(실리카/알루미나 비), 반응온도 등이 펜타실 제올라이트 합성의 중요한 인자임을 알았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.509-512
• /
• 2004

This research is targeting that estimate the effect on cement concrete pavement with type of chloride deicers. In order to this study objective, when chloride deicers were spread on road surface, thermal characteristics test was conducted. Also, skid resistance test according to types and concentration of chloride deicier, road surface conditions were investigated. As a test results, thermal characteristics with kind of chloride deicier could know that sodium chloride(NaCl) is exothermic reactive material, calcium chloride$(CaCl_2)$ is endothermic reactive material. And, in case of mixed salt of the calcium and sodium chloride, it could know that can change to the exothermic or endothermic reaction according to dosage ratios. Skid value by British Pendulum Tester(BPT) has shown that it is seldom difference between the types($CaCl_2$, NaCl, mixed salt) and solution concentrations(0.5, 0.8, 1.0, 4.0, $10\%$) of chloride deicier comparing with tap water except mixed salt($10\%$ solution concentration).

• 상하수도학회지
• /
• 제31권5호
• /
• pp.389-395
• /
• 2017

In this paper, we investigate the characteristics of membrane fouling caused by water temperature in the Membrane bioreactor(MBR) process and try to derive the membrane fouling control by chemical enhanced backwashing(CEB). The extracellular polymeric substances(EPS) concentration was analyzed according to the water temperature in the MBR, and the membrane fouling characteristics were investigated according to the conditions, with sludge & without sludge, through a lab-scale reactor. As shown in the existing literature the fouling resistance rate was increased within sludge with the water temperature was lowered. However, in the lab-scale test using the synthetic wastewater, the fouling resistance increased with the water temperature. This is because that the protein of the EPS was more easily adsorbed on the membrane surface due to the increase of entropy due to the structural rearrangement of the protein inside the protein as the water temperature increases. In order to control membrane fouling, we tried to derive the cleaning characteristics of CEB by using sodium hypochlorite(NaOCl). We selected the condition with the chemicals and the retention time, and the higher the water temperature and the chemical concentration are the higher the efficiencies. It is considered that the increasing temperature accelerated the chemical reaction such as protein peptide binding and hydrolysis, so that the attached proteinaceous structure was dissolved and the frequency of the reaction collision with the protein with the chemical agent becomes higher. These results suggest that the MBRs operation focus on the fouling control of cake layer on membrane surface in low temperatures. On the other hand, the higher the water temperature is the more the operation strategies of fouling control by soluble EPS adsorption are needed.

• Applied Biological Chemistry
• /
• 제36권4호
• /
• pp.296-303
• /
• 1993

식품첨가물로 허용되어 있는 알긴산나트륨, 알긴산프로필렌글리콜(PGA), 카르복시메틸셀룰로오스나트륨(CMC), 펙틴 등 4종의 다당류를 이용하여 달걀 노른자의 수용성 단백질을 분리하기 위한 조건을 반응표면 분석법으로 조사하였다. Rotatable hexagon design으로 실험을 계획하여 다당류의 사용농도 5개 수준, 반응 pH 3개 수준에서 상층액 중의 단백질과 지방질 함량을 각각 측정하여 2차 회귀모형을 구하였다. 통계분석 결과 반응 pH가 다당류의 농도보다 난황 단백질-다당류 상호작용에 더 영향을 미치는 요인으로 밝혀졌다. 각 반응도의 contour plot을 작성, 분석하여 수용성 난황 단백질 분리의 조건으로 알긴산나트륨; 농도 $0.23{\sim}0.25%$, $pH\;5.9{\sim}6.0$, PGA; 농도 $0.15{\sim}0.17%$, $pH\;4.3{\sim}4.5$, CMC; 농도$0.30{\sim}0.31%$, pH 3.0 펙틴; 농도 $0.09{\sim}0.10%$, $pH\;5.6{\sim}5.8$을 설정하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1332-1343
• /
• 2008

The purpose of this study was to investigate the feasibility of using sedimentation calcium carbonate production based on microorganism activities in the strength manifestation of various soil conditions including ground. For analysis and comparison of microbial cementation soil's strength, unconfined compression test was executed by each content of soil(S), water(W), microorganism(B), microorganism and deposit (BF), microorganism, admixture and deposit(BCF) at specimen. The result, the strength of SB(soil+microorganism) and SBF(soil+microorganism+deposit) increased about 8%, 15% than SW(soil+water). Also, initial strength increased. But the strength of SBC(soil+microorganism+admixture) and SBCF(soil+microorganism+deposit+admixture) increased about 71%, 115% than SW(soil+water). The results of the SEM analysis, leading to the formation of an adhesive substance layers at the surface and resulting in firm particle configuration. The XRD examination of the sediment resulting from the reaction between the microorganism and the deposit control agent confirmed the presence of a type of calcium carbonate ($CaCo_3$) vaterite, which affects soil strength formation, as well as sodium silicate, silicides and so forth. This indicates that microorganism plays an important role in the production of carbonate ($CaCo_3$), sodium silicate and silicides. It affects to revelation of ground strength.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.503-507
• /
• 2021

이동용 고분자전해질 연료전지(PEMFC)의 수소발생용으로써 NaBH₄는 많은 장점을 갖고 있다. 야외에서 PEMFC가 이송형으로 사용될 때 증류수대신 담수를 이용해 NaBH₄ 가수분해하면 경제적이다. 그래서 본 연구에서는 NaBH₄ 가수분해 과정에 증류수대신 담수를 이용해 수소를 발생시켰다. 활성탄 담지 Co-P-B/C 촉매를 사용해 NaBH₄ 가수분해 특성에 대해 연구하였다. 담수는 NaBH₄ 가수분해과정에서 4수화물을 발생시키지 않았고, 증류수는 4수화물 부산물이 생성되어 가수분해과정에서 많은 물이 소모되어서 NaBH₄ 25% 이상 고농도에서 반응 종료시점에는 건조한 부산물과 미반응 NaBH₄가 남았음을 확인하였다. 이 결과 담수를 사용했을 때 NaBH₄ 25% 이상 고농도에서 증류수보다 수소 수율과 수소발생속도가 더 높아 무인항공기등 이송형 연료전지에도 적용하기에 적합함을 보였다.

• 공업화학
• /
• 제10권7호
• /
• pp.974-978
• /
• 1999

면섬유에 대한 정련제로서 NP-7(polyoxyethylene(7) nonylphenyl ether) 및 TDA-7((polyoxyethylene(7) tridecyl ether)을 인산에스테르화 반응시켜 PAPE(sodium polyoxyethylene alkyl phosphoric ester)형 음이온 계면활성제인 sodium polyoxyethylene(7) nonylphenyl phosphoric ester(CPB-1)와 sodium polyoxyethylene(7) tridecyl phosphoric ester(CPB-2)를 각각 합성하였다. 합성한 CPB-1과 CPB-2를 기존의 상용제품인 Ultravon GP(GP)와 각 기능별로 성능을 비교하였다. 그 결과 상온 및 $100^{\circ}C$에서의 억포 및 파포력이 CPB-2>CPB-1>GP의 순으로 CPB-2의 기포가 가장 적었고, 또한 가장 빨리 파포되어졌다. 증류수에서의 침윤효과는 CPB-1>GP>CPB-2의 순으로 나타났으나, 실제 일반 정련에서 많이 사용하는 1.2 wt % NaOH 수용액에서의 침윤효과는 전반적으로 CPB-2가 가장 우수한 것으로 나타났다. 섬유가공시의 정련조건인 알카리 상태에서의 안정성은 $CPB-2{\geq}CPB-1$>GP의 순으로 나타났으며, 재흡수력 실험결과 CPB-2>CPB-1>GP의 순으로 CPB-2의 정련력이 가장 우수한 것으로 나타났다.

• 한국음향학회지
• /
• 제23권7호
• /
• pp.497-502
• /
• 2004

Poly (sodium 4-styrenesulfonate) 수용액에 대한 3 MHz의 초음파 음속측정과 0.2-2.2 MHz의 범위에 대한 흡수계수를 측정하였다. 음속은 펄스법을 사용하여 농도 5-25 wt%, 온도 10-90 ℃에 대하여 측정한 결과, 농도 25, 20, 15, 10, 5 wt%에 대한음속의 최대치 온도는 각각 55, 59, 63, 67, 71 ℃이였다. 흡수계수측정은 광 회절 초음파공명법을 사용하여 농도 5-25 wt%, 20 ℃에서 행하였다. 그 결과, 200 kHz부근에서 고분자 chain의 부분운동에 의한 완화현상을, 1 MHz 부근에서는 술폰기 (SO₃)의 proton의 전이에 의한 완화현상을 각각 관측하였다. 흡수계수와 점성은 농도와 함께 증가하였으나 온도증가에 대해서는 감소하였다.